Serta Tulsa 66.1" Convertible Sleeper Loveseat Instruction Manual

1. Introduction

Thank you for choosing the Serta Tulsa 66.1" Convertible Sleeper Loveseat. This multi-functional furniture piece is designed to provide comfort and versatility, serving as a sofa, lounger, or full-size bed. This manual provides essential information for safe assembly, operation, and maintenance of your new loveseat.

Image 1.1: The Serta Tulsa 66.1" Convertible Sleeper Loveseat in its sofa configuration.

2. Safety Information

Please read and understand all safety instructions before assembling or using this product. Failure to follow these instructions may result in injury or damage to the product.

• Fire Hazard: Keep the loveseat away from open flames or high heat sources to prevent fire.
• Pinch Points: The Serta Tulsa loveseat features FingerGuard Pinch Point Protection. However, always supervise children and pets during conversion to avoid entrapment risks. Exercise caution when adjusting the loveseat's position.
• Stability: Ensure all components, especially the legs and frame, are securely attached and stable before use. Do not use if any part is loose or damaged.
• Weight Capacity: Do not exceed the recommended weight capacity for the sofa or bed configuration. Refer to the specifications section for details.
• Assembly: Assembly requires careful attention. Ensure all hardware is correctly installed and tightened.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Sofa Frame (main body)
• Back Cushions (2)
• Legs (4)
• Hardware Pack (bolts, washers, Allen wrench)
• Instruction Manual

Note: Additional tools may be required for assembly (not included).

4. Setup and Assembly

Assembly is required for this product. It is recommended that two adults assemble the loveseat. Clear a spacious area for assembly and keep all components organized.

4.1. Unpacking

1. Carefully remove all components from the packaging.
2. Place all parts on a soft, clean surface to prevent scratches.
3. Identify all hardware components using the provided list.

4.2. Attaching the Legs

1. Carefully turn the main sofa frame upside down.
2. Locate the pre-drilled holes at each corner of the base.
3. Attach each leg to the frame using the provided bolts and washers. Tighten securely with the Allen wrench. Do not overtighten.

Image 4.1: Sofa dimensions and leg attachment points. The legs are 2.3 inches high.

4.3. Final Assembly

1. Once all legs are attached, carefully turn the loveseat upright.
2. Place the two removable back cushions onto the loveseat.
3. Ensure the loveseat is stable and level before use.

5. Operating Instructions

The Serta Tulsa loveseat offers three configurations: sofa, lounger, and sleeper. Follow these steps to convert your loveseat.

Image 5.1: Visual guide for converting the loveseat between sofa, lounger, and sleeper modes.

5.1. Sofa Configuration

In its standard position, the loveseat functions as a comfortable two-seater sofa. Ensure the back cushions are in place and the pull-out mechanism is fully retracted.

5.2. Lounger Configuration

1. Grasp the handle located at the front center of the seat cushion.
2. Gently pull the seat forward. The hidden section will slide out, extending the seating area.
3. Adjust the back cushions for optimal lounging comfort.

5.3. Sleeper Configuration (Full Size Bed)

1. First, convert the loveseat to the lounger configuration as described above.
2. Remove the back cushions.
3. Pull the extended seat section further forward until it fully extends and lies flat, creating a full-size sleeping surface.
4. Ensure the support legs underneath the extended section are properly deployed and stable.

Image 5.2: Sleeper dimensions when the loveseat is fully extended into a bed (54.0" x 75.0" x 19.7").

5.4. Returning to Sofa Configuration

1. If in sleeper mode, push the extended section back towards the main frame until it folds into the lounger position.
2. Continue pushing the extended section until it fully retracts under the main seat cushion.
3. Replace the back cushions.

6. Maintenance and Care

Proper care will extend the life and appearance of your Serta Tulsa loveseat.

• Cleaning: Spot clean with a damp cloth. Use a mild fabric cleaner if necessary, testing on an inconspicuous area first. Do not use harsh chemicals or abrasive cleaners.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
• Vacuuming: Regularly vacuum the upholstery using a soft brush attachment to remove dust and debris.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
• Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten as needed.

7. Troubleshooting

If you encounter issues with your Serta Tulsa loveseat, refer to the following common solutions.

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

Detailed specifications for the Serta Tulsa 66.1" Convertible Sleeper Loveseat.

9. Warranty Information

This Serta Tulsa Convertible Sleeper Loveseat is covered by a Manufacturer Warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to the warranty card included with your product or visit the official Serta website. Keep your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Serta customer support.

• Online Support: Visit the official Serta website for FAQs and support resources.
• Contact Information: Refer to the packaging or the Serta website for current contact details (phone number, email).

Please have your model number (Tulsa 66.1" Convertible Sleeper Loveseat) and proof of purchase ready when contacting support.