1. Introduction
Thank you for purchasing the HORI Nintendo Switch Wireless HORIPAD. This controller is officially licensed by Nintendo and designed to enhance your gaming experience with the Nintendo Switch. It features Bluetooth wireless technology, a built-in rechargeable lithium-ion battery, and full motion control capabilities through its accelerometer and gyroscope. Please read this manual thoroughly to ensure proper setup and operation.
2. Package Contents
Please ensure all items listed below are included in your package:
- HORI Nintendo Switch Wireless HORIPAD (Teal)
- USB-C Charging Cable
3. Parts Identification
Familiarize yourself with the various parts and controls of your Wireless HORIPAD.
Figure 3.1: Front View of the Wireless HORIPAD
Figure 3.2: Side View of the Wireless HORIPAD
Figure 3.3: Back/Top View of the Wireless HORIPAD with USB-C Port
3.1 Button Layout
- Left Analog Stick: For movement and camera control.
- Right Analog Stick: For camera control and aiming.
- D-Pad: Directional input.
- A/B/X/Y Buttons: Action buttons.
- L/R Buttons: Shoulder buttons.
- ZL/ZR Buttons: Trigger buttons.
- HOME Button: Returns to the Nintendo Switch HOME Menu.
- + (Plus) Button: Start/Pause button.
- - (Minus) Button: Select button.
- Capture Button: Takes screenshots or video clips.
- USB-C Port: For charging the controller.
4. Setup
4.1 Charging the Controller
Before initial use, fully charge the Wireless HORIPAD. A full charge provides approximately 15 hours of playtime.
- Connect the included USB-C charging cable to the USB-C port on the top of the controller.
- Connect the other end of the USB-C cable to a USB port on your Nintendo Switch Dock or a compatible USB wall adapter.
- The LED indicator on the controller will illuminate to show charging status. It will turn off or change color when fully charged.
4.2 Pairing with Nintendo Switch
Follow these steps to wirelessly connect your HORIPAD to your Nintendo Switch console:
- From the Nintendo Switch HOME Menu, select Controllers > Change Grip/Order.
- While on the Change Grip/Order screen, press and hold the SYNC Button on the top of the Wireless HORIPAD for a few seconds until the player LEDs begin to flash.
- Once the controller is successfully paired, the player LED(s) corresponding to its player number will remain lit.
- Press the A Button to confirm and exit the pairing screen.
The controller will automatically attempt to reconnect to the last paired Nintendo Switch console when powered on.
5. Operating Instructions
5.1 Basic Controls
The Wireless HORIPAD functions like a standard Nintendo Switch Pro Controller. Use the analog sticks for movement and camera control, the D-pad for directional input, and the A/B/X/Y buttons for in-game actions. The L/R and ZL/ZR buttons provide additional input options, commonly used for attacking, defending, or special abilities.
5.2 Motion Controls
This controller is equipped with an accelerometer and gyroscope, enabling full motion control in compatible Nintendo Switch games. Tilt, shake, or rotate the controller to interact with games that support these features. Ensure the controller is calibrated correctly within the Nintendo Switch system settings if you experience issues with motion sensing.
5.3 Battery Life
The built-in rechargeable lithium-ion battery provides over 15 hours of gameplay on a single charge. Battery life may vary depending on usage and game type. When the battery is low, the player LEDs may flash to indicate that charging is required. Connect the USB-C cable to recharge.
6. Maintenance
6.1 Cleaning
To clean your Wireless HORIPAD, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the controller's finish and internal components. Avoid getting moisture into any openings.
6.2 Storage
Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid placing heavy objects on the controller. If storing for an extended period, ensure the battery is partially charged (around 50%) to help maintain its longevity.
7. Troubleshooting
If you encounter any issues with your Wireless HORIPAD, please refer to the table below for common problems and solutions.
| Issue | Solution |
|---|---|
| Controller does not connect to Nintendo Switch. |
|
| Controller does not charge. |
|
| Input lag or unresponsive buttons/sticks. |
|
| Motion controls are not working correctly. |
|
8. Specifications
Technical details for the HORI Nintendo Switch Wireless HORIPAD (Model NSW-499U):
| Feature | Detail |
|---|---|
| Model Number | NSW-499U |
| Connectivity | Bluetooth Wireless |
| Wireless Range | Up to 32 feet (approx. 10 meters) |
| Battery Type | Rechargeable Lithium-ion |
| Battery Life | Approx. 15+ hours per charge |
| Charging Port | USB-C |
| Motion Control | Accelerometer, Gyroscope |
| Weight | 1.18 pounds (approx. 0.54 kg) |
| Package Dimensions | 7.05 x 6.22 x 3.03 inches (approx. 17.9 x 15.8 x 7.7 cm) |
| Manufacturer | HORI |
| Official License | Officially Licensed by Nintendo |
9. Warranty & Support
For warranty information, technical support, or further assistance with your HORI Nintendo Switch Wireless HORIPAD, please visit the official HORI website or contact their customer support directly. Details regarding product warranty periods and service procedures are typically available on the manufacturer's official support pages.
Please retain your proof of purchase for any warranty claims.
