Introduction
This manual provides essential information for the safe and efficient use of your FelixKing FK5088 PU Leather Executive Office Chair. Please read these instructions carefully before assembly and operation, and retain them for future reference.
The FelixKing FK5088 chair is designed for comfort and support, featuring an ergonomic mid-back design, adjustable height, flip-up armrests, a rocking function, and durable construction with high-quality PU leather.
Image: Front view of the FelixKing FK5088 Executive Office Chair in brown, highlighting its padded design and overall structure.
Safety Information
- Always follow the assembly instructions carefully to ensure the chair is properly assembled and stable.
- Do not exceed the maximum weight capacity of 300 lbs (136 kg).
- Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten as necessary.
- Avoid standing on the chair or using it as a step stool.
- Keep children and pets away from the chair during assembly.
Setup and Assembly
Your FelixKing FK5088 chair includes detailed assembly instructions within the packaging. Please refer to these instructions for a step-by-step guide to assembling your chair.
For a visual guide, please watch the official user manual video below:
Video: Official user manual for the 5088 office chair, demonstrating assembly steps and features.
Ensure all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Image: Key components of the chair, including the SGS certified air rod, sturdy chassis, low noise rollers, high load-bearing tripod base, and a close-up of the breathable PU leather material.
Operating Instructions
1. Height Adjustment
To adjust the chair's height, locate the lever on the right side beneath the seat. Pull the lever upwards while seated to lower the chair, or pull the lever upwards while standing to raise the chair. Release the lever at your desired height.
Image: Demonstrates the chair's adjustable features, including the 90° flip-up armrests, 90°-120° tilt regulation, and 10cm up and down height adjustment.
2. Flip-Up Armrests
The armrests can be rotated vertically by 90 degrees. This feature allows you to push the chair further under your desk, saving space when not in use, or to adjust for different activities.
Image: A brown executive office chair with its armrests flipped up, illustrating the space-saving feature.
3. Rocking Function
The right-side handle also controls the rocking function. Pull the handle outwards to enable the rocking motion, allowing the chair to tilt back. Push the handle inwards to lock the chair in an upright position. The tension adjustment knob, located beneath the seat, can be rotated to customize the resistance of the rocking motion.
4. Swivel Function
The chair features 360° silent swivel casters, allowing for smooth and quiet movement across various floor surfaces without causing distractions.
Image: Details of the chair's thickened headrest, lumbar support, and seat cushion, along with an arrow illustrating the 360-degree swivel capability.
Maintenance
To maintain the quality and appearance of your FelixKing FK5088 chair, follow these simple care instructions:
- Cleaning: The high-quality PU leather is easy to clean. Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.
- Inspection: Periodically inspect all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
- Casters: Keep the casters free of debris (hair, dust, etc.) to ensure smooth rolling.
Troubleshooting
If you encounter any issues with your FelixKing FK5088 chair, please consider the following:
- Chair Wobbles: Ensure all assembly bolts are securely tightened. Check that the chair is on a flat, even surface.
- Height Adjustment Not Working: Verify that the gas lift lever is fully engaged or disengaged as required. Ensure no obstructions are preventing the gas lift from functioning.
- Casters Not Rolling Smoothly: Check for any hair or debris caught in the casters and remove them.
For persistent issues or concerns not addressed here, please contact FelixKing customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | FelixKing |
| Model Name | FK5088 |
| Color | Brown |
| Product Dimensions | 28"D x 28"W x 48"H |
| Maximum Weight Recommendation | 300 Pounds |
| Material | Alloy Steel, PU Leather (Cotton, Foam, Sponge fill) |
| Special Features | Adjustable Backrest, Adjustable Height, Arm Rest, Ergonomic, Flip-Up Armrests, Tilting |
| Furniture Base Movement | Swivel |
| Product Care Instructions | Wipe Clean |
Image: Illustrates the ergonomic design of the chair, highlighting head, back, lumbar, hip, and leg support areas.
Warranty and Support
For any warranty claims, product support, or inquiries, please contact FelixKing customer service.
Contact Information:
- Email: service@felixking7.com
- Phone: +1 (269) 397-4226
- Amazon Account: Login to your Amazon account, go to 'Your Orders', find the relevant order, and click 'Contact Seller'.
Image: FelixKing contact details for customer support.