PHEZEN Car Radio Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your PHEZEN 9-inch touchscreen car radio. This unit is designed for Chevy Colorado and GMC Canyon models from 2015 to 2019, offering advanced features such as Wireless CarPlay, Android Auto, GPS Navigation, Bluetooth connectivity, and an AHD Backup Camera. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: Overview of the PHEZEN Car Radio unit, showing the main display, included backup camera, and connection cables.

2. Safety Information

• Always operate the device in a safe manner. Avoid prolonged interaction with the touchscreen while driving.
• Ensure all wiring is correctly connected and secured to prevent short circuits or damage.
• Do not attempt to disassemble or modify the unit. Refer to qualified personnel for repairs.
• Keep the unit away from water, moisture, and extreme temperatures.
• Use the backup camera feature as an aid; always check your surroundings visually when reversing.

3. Setup and Installation

The installation of this car radio requires technical knowledge. It is recommended to have it installed by a professional. Refer to the separate detailed installation manual included in the package for specific wiring diagrams and vehicle-specific instructions.

3.1 Package Contents

Before beginning installation, verify that all components are present:

• 1 x Android Stereo Radio Unit
• 1 x Power Cable
• 1 x GPS Antenna
• 1 x Rear Camera Input Cable
• 1 x RCA Cable
• 2 x USB Cables
• 1 x AHD Camera
• 1 x Microphone
• 1 x Canbus Box
• 1 x Radio Adapter
• 1 x Instruction Manual (this document)
• 1 x Detailed Installation Manual (separate)

Image 3.1: Contents of the PHEZEN Car Radio package, including the main unit, various cables, GPS antenna, microphone, AHD camera, and Canbus box.

3.2 Initial Power-On

After successful installation, turn on your vehicle's ignition. The car radio should power on automatically. Follow any on-screen prompts for initial setup, such as language selection and time zone.

4. Operating Instructions

4.1 Touchscreen Operation

The unit features a 9-inch IPS touchscreen with a resolution of 1024x600 pixels. Navigate through menus and applications by tapping, swiping, and pinching gestures, similar to a smartphone or tablet.

Image 4.1: Visual representation of the enhanced clarity provided by the 1024x600 IPS touchscreen compared to a lower resolution display.

4.2 Wireless CarPlay & Android Auto

This unit supports both Wireless CarPlay for iOS devices and Wireless Android Auto for Android devices. This allows you to integrate your smartphone's features directly onto the car radio's display.

1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
2. On the car radio, navigate to the CarPlay or Android Auto application.
3. Follow the on-screen instructions to pair your phone via Bluetooth.
4. Once paired, the system will automatically establish a Wi-Fi connection for wireless CarPlay/Android Auto functionality.
5. You can now use voice commands (Siri or Google Assistant) for calls, navigation, music playback, and other compatible apps.

Image 4.2: Display of Wireless CarPlay and Android Auto interfaces, highlighting features like calls, messages, navigation, and music playback.

4.3 GPS Navigation & WiFi Connectivity

The unit features a dual navigation system supporting both offline and online maps. Connect to a Wi-Fi hotspot (e.g., from your smartphone) to access online maps and other internet-dependent applications.

1. GPS Navigation: Open the pre-installed navigation app. Ensure the GPS antenna is properly installed for accurate positioning. Download offline maps for areas with limited mobile signal.
2. WiFi Connectivity: Go to Settings > Network & Internet > Wi-Fi. Select your desired Wi-Fi network and enter the password to connect.

Image 4.3: Demonstration of GPS navigation functionality and the use of various online applications when connected to Wi-Fi.

4.4 Bluetooth Functions

The built-in Bluetooth 5.0 module allows for hands-free calling and audio streaming.

1. Pairing: Enable Bluetooth on your phone. On the car radio, go to the Bluetooth app, search for your phone, and pair the devices.
2. Hands-Free Calling: Once paired, you can make and receive calls directly from the car radio's screen. The unit supports both its built-in microphone and an external microphone for clear communication.
3. Audio Streaming: Play music from your phone through the car's speakers via Bluetooth.

4.5 FM/RDS Radio

Access local radio stations using the FM/RDS tuner. The Radio Data System (RDS) displays station information, song titles, and other data where available.

1. Open the Radio application.
2. Use the scan function to find available stations or manually tune to a frequency.
3. Save your favorite stations as presets for quick access.

4.6 Steering Wheel Control (SWC)

The unit is compatible with your vehicle's existing steering wheel controls, allowing you to manage audio and other functions without taking your hands off the wheel.

1. Navigate to the SWC settings in the system menu.
2. Follow the on-screen instructions to program each button on your steering wheel to the corresponding function on the car radio.

4.7 AHD Backup Camera

The included AHD backup camera provides a clear view of the area behind your vehicle when reversing, enhancing safety and ease of parking. It features a 170° wide-angle lens, IP68 waterproof rating, and night vision capabilities.

• When the vehicle is shifted into reverse gear, the car radio display will automatically switch to the camera view.
• Guide lines may be displayed on the screen to assist with parking.

4.8 Split Screen Function

The split-screen feature allows you to run two applications simultaneously on the display, such as navigation and music playback.

• To activate, open one application, then long-press the recent apps button or follow the specific gesture/button combination for split-screen mode on your unit.
• Select a second application to display alongside the first.

Image 4.4: Visual examples of the rear view camera in action, the interface for programming steering wheel controls, and the split-screen feature displaying navigation and video content.

4.9 Voice Control

Utilize voice commands through Siri (for CarPlay) or Google Assistant (for Android Auto) to control various functions, minimizing distractions while driving.

• Activate voice control by saying the wake word (e.g., "Hey Siri" or "Hey Google") or by pressing the dedicated voice assistant button on the screen or steering wheel.
• Issue commands for navigation, calls, music, and more.

4.10 1080P Video Player & Mirror Link

The unit supports 1080p video playback and offers a Mirror Link function for iOS and Android devices, allowing you to mirror your phone's screen onto the car radio.

• Video Player: Access the video player app to play media files from connected USB drives.
• Mirror Link: Connect your smartphone via USB or Wi-Fi and follow the on-screen instructions in the Mirror Link app to duplicate your phone's display.

Image 4.5: The car radio displaying a high-definition 1080P video, illustrating the unit's multimedia capabilities.

4.11 EQ Settings

Customize your audio experience using the built-in Equalizer (EQ) settings. Adjust bass, treble, and other audio parameters to suit your preferences.

Image 4.6: Visuals of the Bluetooth hands-free calling screen, the FM/RDS radio interface, and the audio equalizer settings for sound customization.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the touchscreen and unit exterior. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
• Software Updates: Periodically check for available software updates through the system settings or the manufacturer's website to ensure optimal performance and access to new features.
• Environmental Care: Protect the unit from direct sunlight for extended periods and extreme temperatures to prolong its lifespan.

6. Troubleshooting

If you encounter issues with your PHEZEN car radio, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

7. Specifications

• Model: B0F8VGQLB6
• Brand: PHEZEN
• Display: 9-inch IPS Touchscreen, 1024x600 resolution
• Operating System: Android 13
• Memory: 2GB RAM + 32GB ROM
• Connectivity: Bluetooth 5.0, Wi-Fi, USB Type A
• Features: Wireless CarPlay, Android Auto, GPS Navigation, FM/RDS Radio, AHD Backup Camera (included), Steering Wheel Control (SWC), 1080p Video Player, Mirror Link, Split Screen, EQ Settings
• Compatible Devices: Smartphone (iOS, Android)
• Audio Output Mode: Stereo
• Manufacturer: PHEZEN
• First Available: May 16, 2025

8. Warranty and Support

8.1 Warranty Information

Please refer to the warranty card included with your product or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

8.2 Customer Support

For questions regarding installation or use, you can contact the seller directly. We aim to respond within 24 hours to assist you with any issues.

• Contact Method: On the product page, locate the store name "UZZO-PHEZEN", click on it, then select "Ask" or "Send message to seller".