1. Introduction and Overview
The Masterpro Flippy Floppy Offshore Squid Teaser is a high-quality fishing rig designed to attract large predatory fish such as marlin and tuna. This daisy chain teaser creates significant splash and flash, mimicking a school of baitfish, which entices game fish to strike. It is built for durability and effective performance in offshore trolling conditions.
This manual provides essential information on the product's features, proper setup, operational guidelines, maintenance procedures, and detailed specifications to ensure optimal use and longevity of your Masterpro Flippy Floppy Offshore Squid Teaser.
2. Product Features
The Masterpro Flippy Floppy Offshore Squid Teaser is available in two main configurations, Section A and Section B, and two colors: green or pink. Each design is meticulously crafted to maximize its effectiveness in attracting fish.
Design Variations:
- Section A: Features 1 x 7" Fly Bird (top) and 1 x 5" Fly Bird (bottom) for enhanced splash and flash. It includes 3 x 9" Fat Squid and 8 x 6" Fat Squid for a realistic squid chain presentation.
- Section B: Features 1 x 5" Fly Bird (bottom) for splash and flash. It includes 4 x 9" Fat Squid and 8 x 6" Fat Squid for a lifelike squid chain presentation.
Figure 2.1: Design variations of the Masterpro Flippy Floppy Offshore Squid Teaser, illustrating the differences between Section A and Section B in both pink and green colors, including bird and squid sizes.
Material and Construction:
- Fly Birds: Both the top and bottom fly birds are constructed from durable PP (Polypropylene) material, designed to create significant surface disturbance.
- Squids: The fat squids are made of high-quality rubber and feature a luminous coating, enhancing visibility in deep or low-light water conditions. They also include a built-in luminous soft bead and vivid eyes for added realism.
- Leader and Swivel: The rig is pre-assembled with a robust 400lb shock leader and a 300lb ball bearing swivel with snap, ensuring reliability and strength against large game fish.
Figure 2.2: Detailed view of the luminous coating squid, showing its flexible skirt, built-in luminous soft bead, and vivid eyes.
Figure 2.3: Detailed view of the PP Fly bird, highlighting its reflective laser label for enhanced visibility.
Overall Durability:
The entire rig is built to withstand repeated strikes and the rigors of high-speed trolling, ensuring a long service life.
Figure 2.4: The Masterpro Flippy Floppy Offshore Squid Teaser in its complete assembly.
3. Setup
The Masterpro Flippy Floppy Offshore Squid Teaser comes pre-rigged for convenience, minimizing setup time on the water.
Attaching the Teaser:
- Inspect Components: Before each use, visually inspect the entire rig, including the leader, squids, birds, and especially the 300lb ball bearing swivel and snap, for any signs of wear, fraying, or damage. Ensure all connections are secure.
- Connect to Main Line: Use the integrated 300lb ball bearing swivel with snap at the end of the rig to securely attach it to your main fishing line or a dedicated teaser line from your boat. Ensure the connection is strong enough to withstand the drag created by the teaser and any potential strikes.
- Deployment Point: Determine the optimal deployment point on your boat. Teasers are typically deployed from outriggers, shotgun positions, or flat lines, depending on your trolling spread and target species.
Figure 3.1: The robust ball bearing swivel and snap for secure attachment.
4. Operating Instructions
The Masterpro Flippy Floppy Offshore Squid Teaser is designed for offshore trolling to attract marlin and tuna.
Deployment and Trolling:
- Positioning: Deploy the teaser at a distance behind the boat where it can create maximum surface disturbance without interfering with your fishing lines. The birds are designed to splash and dart, simulating fleeing baitfish.
- Trolling Speed: Experiment with various trolling speeds to find the optimal action for the teaser. Generally, speeds between 6-10 knots are effective for offshore trolling, but adjust based on sea conditions and target species behavior. The teaser should be skipping and splashing on the surface.
- Observation: Continuously observe the teaser's action. The lifelike squid chain presentation should appear natural in the water, mimicking a school of squid.
- Attraction: The primary goal of the teaser is to draw predatory fish closer to your spread, where they can then be enticed to strike your baited hooks or lures.
5. Maintenance
Proper maintenance will extend the life and effectiveness of your Masterpro Flippy Floppy Offshore Squid Teaser.
After Each Use:
- Rinse Thoroughly: After each fishing trip, rinse the entire teaser with fresh water to remove salt, sand, and any debris. This prevents corrosion and material degradation.
- Air Dry: Allow the teaser to air dry completely in a shaded, well-ventilated area before storing. Do not store wet.
Storage:
- Cool, Dry Place: Store the teaser in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to UV light can degrade the rubber and plastic components.
- Prevent Tangling: Store the teaser in a way that prevents the lines and squids from tangling, such as coiling the leader neatly or using a dedicated storage bag.
Periodic Inspection:
- Leader: Regularly check the 400lb shock leader for any nicks, abrasions, or signs of weakening. Replace if necessary.
- Swivel and Snap: Ensure the 300lb ball bearing swivel rotates freely and the snap mechanism is secure and not corroded. Lubricate with a marine-grade lubricant if needed.
- Squids and Birds: Inspect the rubber squids and PP birds for tears, cracks, or significant damage. While built to be durable, replacement may be necessary if integrity is compromised.
6. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Teaser not splashing/darting effectively | Incorrect trolling speed; fouled line; damaged bird. | Adjust trolling speed; check for debris on line/teaser; inspect birds for damage. |
| No fish attraction | Wrong trolling speed; incorrect depth; fish not present; poor visibility of teaser. | Vary speed; ensure teaser is on surface; move to different fishing grounds; check luminous coating. |
| Leader or components breaking | Wear and tear; excessive strain; manufacturing defect. | Regularly inspect and replace worn components; ensure proper drag settings on reel; contact Masterpro support if new. |
| Squids losing luminosity | Insufficient light exposure; coating degradation. | Expose squids to light before use (sunlight or flashlight); consider replacement if severely degraded. |
7. Specifications
Detailed specifications for the Masterpro Flippy Floppy Offshore Squid Teaser (Model B0F8QF745P):
| Attribute | Detail |
|---|---|
| Brand | Masterpro |
| Model Number (ASIN) | B0F8QF745P |
| Color | Green (also available in Pink) |
| Material (Birds) | PP (Polypropylene) |
| Material (Squids) | Rubber with Luminous Coating |
| Leader Strength | 400lb Shock Leader |
| Swivel Strength | 300lb Ball Bearing Swivel with Snap |
| Bird Size (Section A) | 1 x 7" (top), 1 x 5" (bottom) |
| Squid Count (Section A) | 3 x 9" Fat Squid, 8 x 6" Fat Squid |
| Bird Size (Section B) | 1 x 5" (bottom) |
| Squid Count (Section B) | 4 x 9" Fat Squid, 8 x 6" Fat Squid |
| Sport Type | Fishing |
| Skill Level | All |
8. Reliability and Service
Masterpro is a proudly Australian-owned brand committed to delivering high-quality, affordable fishing gear. We stand by the reliability of our products.
If you have any questions, concerns, or require assistance with your Masterpro Flippy Floppy Offshore Squid Teaser, please do not hesitate to contact us. We are dedicated to providing satisfactory service to all our customers.
For support, please refer to the contact information provided on the Masterpro official website or through your point of purchase.
