ASUS Prime Radeon RX 9060 XT 16GB GDDR6 OC Edition Graphics Card User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your ASUS Prime Radeon RX 9060 XT 16GB GDDR6 OC Edition Graphics Card. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Image: The ASUS Prime Radeon RX 9060 XT graphics card shown alongside its retail box, highlighting its design and branding.

1. Setup and Installation

1.1 Pre-installation Checks

• System Compatibility: Ensure your motherboard has a compatible PCI Express 5.0 x16 slot.
• Power Supply: A power supply unit (PSU) with sufficient wattage (recommended 750W-850W or higher) and appropriate PCIe power connectors is required.
• Case Clearance: Verify your computer case has adequate space for the graphics card. This card features a 2.5-slot design and dimensions of approximately 12 x 5 x 0.1 inches.

Image: A close-up view of the graphics card, emphasizing its 2.5-slot design, which allows for greater build compatibility while maintaining cooling performance.

Image: The ASUS Prime Radeon RX 9060 XT graphics card positioned vertically next to an ASUS Prime 850W/750W Gold power supply unit, illustrating recommended PSU compatibility.

1.2 Physical Installation

1. Power Off: Turn off your computer and disconnect the power cable from the wall outlet.
2. Open Case: Remove the side panel of your computer case.
3. Locate PCIe Slot: Identify an available PCI Express 5.0 x16 slot on your motherboard. Remove any slot covers from the back of the case corresponding to the chosen slot.
4. Insert Graphics Card: Carefully align the graphics card with the PCIe slot and press it down firmly until it is securely seated. Ensure the retention clip on the motherboard clicks into place.
5. Secure Card: Fasten the graphics card to the case with screws.
6. Connect Power: Connect the required PCIe power cables from your power supply to the graphics card's power connectors.
7. Close Case: Replace the side panel of your computer case.
8. Connect Display: Connect your monitor to one of the graphics card's display outputs (HDMI or DisplayPort).

Image: A detailed view of the rear I/O panel of the graphics card, showcasing the multiple DisplayPort and HDMI outputs for connecting displays.

1.3 Driver Installation

After physical installation, power on your computer. You will need to install the latest graphics drivers for optimal performance. Download the appropriate drivers from the official ASUS support website or AMD's official website for Radeon RX 9060 XT series graphics cards.

2. Operating the Graphics Card

2.1 Display Connectivity

The graphics card supports multiple display outputs including HDMI 2.1 and DisplayPort 2.1. Connect your monitor(s) using compatible cables to achieve desired resolutions and refresh rates, up to 7680x4320 pixels.

2.2 Software Utilities: GPU Tweak III

Utilize the ASUS GPU Tweak III software for advanced control over your graphics card. This utility allows for:

• Performance tweaking and overclocking.
• Advanced thermal controls.
• System monitoring of GPU temperature, clock speeds, and fan speeds.

Image: The ASUS Prime Radeon RX 9060 XT graphics card shown alongside information about GPU Tweak III software, highlighting its tuning capabilities.

2.3 Dual BIOS Switch

The graphics card features a Dual BIOS switch, allowing you to select between two operational modes:

• Performance Mode: Maximizes cooling performance for demanding tasks.
• Quiet Mode: Utilizes a less aggressive fan curve for quieter operation, ideal for light loads or silent computing environments.

Switching between modes typically involves a physical switch on the card. Ensure your system is powered off before changing the BIOS setting.

Image: A close-up view of the graphics card's PCB, highlighting the Dual BIOS switch that allows users to toggle between Performance and Quiet modes.

3. Maintenance

3.1 Cleaning

Regular cleaning helps maintain optimal performance and extends the lifespan of your graphics card. Use compressed air to gently remove dust from the fans and heatsink fins. Ensure the system is powered off and unplugged before cleaning.

3.2 Fan Bearings

The axial-tech fans are equipped with dual-ball fan bearings, which offer enhanced durability and a longer lifespan compared to traditional sleeve bearings. No specific maintenance is required for the bearings themselves, but keeping the fans free of dust is crucial for their operation.

Image: An illustration detailing the cooling features of the graphics card, including MaxContact design, Axial-Tech Fans, and 0dB Technology, which stops fans below 55°C for silent operation.

Image: A visual representation of the graphics card's reliability features, such as GPU Protection, a Protective Backplate for structural rigidity, and Dual Ball Fan Bearings for extended durability.

4. Troubleshooting

4.1 No Display Output

• Ensure the graphics card is fully seated in the PCIe slot.
• Verify all PCIe power cables are securely connected to the graphics card.
• Check that your monitor cable is correctly connected to the graphics card and the monitor is powered on and set to the correct input.
• Try connecting to a different display output port on the graphics card or using a different cable.

4.2 Performance Issues

• Ensure you have the latest graphics drivers installed from ASUS or AMD.
• Check GPU temperatures using monitoring software like GPU Tweak III. Overheating can lead to performance throttling. Ensure proper airflow in your case.
• Verify your power supply meets the recommended wattage for the graphics card.
• If using the Dual BIOS switch, try switching to Performance Mode.

4.3 Fan Noise

• The card features 0dB technology, meaning fans stop when GPU temperature is below 55°C for silent operation during light loads. Fans will spin up under heavier loads.
• If fan noise is excessive under normal load, ensure fans are free of dust and obstructions.
• Consider adjusting fan curves using GPU Tweak III software.

5. Specifications

6. Warranty and Support

For warranty information, please refer to the documentation included with your product or visit the official ASUS support website. ASUS provides customer support and resources for product registration, driver downloads, and technical assistance.

ASUS Support Website: https://www.asus.com/support/