Introduction
Thank you for choosing the VGR 640S3 Professional 3-in-1 Hair Cutting Kit. This comprehensive grooming set includes a powerful hair clipper, a precision hair trimmer, and a versatile foil shaver, designed to provide professional-quality results for all your hair cutting and shaving needs. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your VGR 640S3 kit to ensure optimal performance and longevity.
Safety Information
Always unplug the device before cleaning. Do not use near water. Keep away from heat sources. Dispose of used blades responsibly. Avoid contact with eyes and be careful when using near the face and neck. Always supervise children when using the product.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Package Contents
Image: All components of the VGR 640S3 Professional 3-in-1 Hair Cutting Kit, including the clipper, trimmer, shaver, various guide combs, charging cables, cleaning brush, and lubricating oil.
Your VGR 640S3 kit comes with the following items:
- Hair Clipper
- Hair Trimmer
- Foil Shaver
- 6 Clipper Guards (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
- 3 Trimmer Guards (1mm, 2mm, 3mm)
- Lubricating Oil
- Cleaning Brush
- Protective Covers
- USB Charging Cables (for each device)
Setup
Initial Charging
Image: A diagram illustrating the charging and working times for the clipper, trimmer, and shaver. The clipper has a 2500mAh battery with 250 minutes running time and 3 hours charging time. The trimmer has a 2000mAh battery with 240 minutes running time and 2.5 hours charging time. The shaver has a 1200mAh battery with 150 minutes running time and 2 hours charging time.
Before first use, fully charge each device. Connect the provided USB charging cable to the respective device and a suitable USB power adapter (not included). The LED display on each tool will indicate the charging status. Full charging times are approximately:
- Clipper: 3 hours for up to 250 minutes of runtime.
- Trimmer: 2.5 hours for up to 240 minutes of runtime.
- Shaver: 2 hours for up to 150 minutes of runtime.
Attaching Guide Combs
Image: A close-up of the hair clipper showing its adjustable taper lever and a selection of guide combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) for the clipper, and smaller combs (1mm, 2mm, 3mm) for the trimmer.
Select the desired guide comb for your preferred cutting length. Align the comb with the blade and push firmly until it clicks into place. Ensure the comb is securely attached before use. To remove, gently pull the comb away from the blade.
Operating Instructions
Hair Clipper (VGR-640 S3)
Image: A person using the VGR hair clipper to trim hair on the side of a head, demonstrating its ergonomic design and ease of use.
The hair clipper is equipped with high-precision ceramic and powder metallurgic blades and a powerful 9000 RPM intelligent torque motor. It features a dual-speed control for smooth, precise cutting across all hair types.
- Power On/Off: Press the power button to turn the clipper on or off.
- Adjusting Cutting Length: Use the adjustable taper lever on the side of the clipper to fine-tune cutting lengths from 0.5mm to 2.5mm. Attach the appropriate guide comb for longer lengths (1.5mm to 12mm).
- Usage: For best results, use on clean, dry hair. Move the clipper against the direction of hair growth.
Hair Trimmer
The trimmer features a DLC-coated T-blade, ideal for sharp lines, detailed work, and zero-gap 0mm trimming. It is designed for precision and intricate styling.
- Power On/Off: Press the power button to activate the trimmer.
- Usage: Use for outlining, edging, and creating crisp lines around the neckline, sideburns, and beard. Can be used with 1mm, 2mm, or 3mm guide combs for stubble or short beard trimming.
Foil Shaver
Image: A detailed view of the VGR foil shaver, highlighting its dual hypoallergenic floating shaving heads and durable mesh head, designed for a close and irritation-free shave.
The electric foil shaver is equipped with dual hypoallergenic foils for a smooth and irritation-free shave, especially suitable for sensitive skin. It also features an advanced motor system with three adjustable speeds (7000, 8000, and 9000 RPM).
- Power On/Off: Press the power button to operate the shaver.
- Speed Adjustment: Cycle through the three speed settings (7000, 8000, 9000 RPM) using the dedicated speed button to customize your shaving experience.
- Usage: For best results, use on short stubble. Hold the shaver at a right angle to the skin and move in short, gentle strokes.
Maintenance
Cleaning the Blades
Regular cleaning ensures optimal performance and hygiene. After each use:
- Turn off and unplug the device.
- Remove any attached guide combs.
- Use the provided cleaning brush to remove loose hairs from the blades and cutting head. For the shaver, carefully remove the foil head and brush out trapped hairs.
- For a more thorough clean, the blades can be rinsed under running water (check specific device water resistance before doing so). Ensure blades are completely dry before reattaching or storing.
Oiling the Blades
To maintain blade sharpness and smooth operation, apply a few drops of the included lubricating oil to the blades after every few uses, or as needed.
- Apply 1-2 drops of oil evenly across the top of the blades.
- Turn on the device for a few seconds to distribute the oil.
- Wipe off any excess oil with a soft cloth.
Storage
Store the devices and accessories in a cool, dry place, away from direct sunlight and moisture. Use the protective covers for the blades when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is low or depleted. | Charge the device fully. Check the LED display for battery status. |
| Poor cutting performance / pulling hair. | Blades are dull, dirty, or not oiled. | Clean the blades thoroughly and apply lubricating oil. If performance does not improve, consider professional blade sharpening or replacement. |
| Excessive vibration or noise. | Hair trapped in the motor or loose components. | Clean the device thoroughly. Ensure all parts are securely attached. If the issue persists, contact customer support. |
| Shaver not providing a close shave. | Foil head is worn or dirty. | Clean the foil head and inner blades. Replace the foil head if it appears damaged or worn. |
Technical Specifications
Image: A table summarizing the product specifications including model, battery capacity, rated input, RPM, charging time, working time, motor type, and taper lever details for the clipper, trimmer, and shaver.
| Feature | Detail |
|---|---|
| Model Name | 640S3 |
| Item Model Number | VGR-640 S3 |
| Clipper Battery | 2500mAh Lithium-Ion |
| Clipper Runtime | Up to 250 minutes |
| Clipper Charge Time | Approx. 3 hours |
| Trimmer Battery | 2000mAh Lithium-Ion |
| Trimmer Runtime | Up to 240 minutes |
| Trimmer Charge Time | Approx. 2.5 hours |
| Shaver Battery | 1200mAh Lithium-Ion |
| Shaver Runtime | Up to 150 minutes |
| Shaver Charge Time | Approx. 2 hours |
| Motor Speed | Up to 9000 RPM (Clipper/Trimmer), 7000/8000/9000 RPM (Shaver) |
| Blades | Ceramic & Powder Metallurgic (Clipper), DLC-coated T-blade (Trimmer), Dual Hypoallergenic Foils (Shaver) |
| Power Input | 5V 1A (USB Charge) |
| Package Dimensions | 13.46 x 10.12 x 2.4 inches |
| Weight | 3.7 Pounds |
Warranty and Support
Image: Icons indicating 1 Year Warranty and 24 Hour Support, highlighting VGR's commitment to customer service.
VGR products are manufactured with high-quality standards. Your VGR 640S3 Hair Cutting Kit comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects.
For any questions, concerns, or technical support, please contact VGR customer service. We offer 24-hour support to assist you with your product. Please refer to the contact information provided with your purchase or visit the official VGR website for assistance.
Seller: VGR-VOVAGER
