BitFenix Graph ATX Mid Tower PC Case User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix Graph ATX Mid Tower PC Case. Please read this manual carefully before beginning the installation process to ensure proper setup and optimal performance. Keep this manual for future reference.

The BitFenix Graph is a high-performance ATX Mid Tower case designed for enthusiasts, featuring a mesh front panel for superior airflow, tempered glass side panel for showcasing your build, and pre-installed FRGB fans for vibrant lighting. It supports MicroATX and Mini-ITX motherboards and includes a 750W 80+ Bronze power supply.

Image 1.1: Front view of the BitFenix Graph ATX Mid Tower PC Case, showcasing the mesh front panel and three illuminated FRGB fans. The tempered glass side panel reveals the interior, including a rear FRGB fan.

2. Package Contents

Verify that all components are present in the package:

• BitFenix Graph ATX Mid Tower PC Case
• Pre-installed 750W 80+ Bronze Power Supply Unit (PSU)
• 3 x 120mm FRGB Front Fans (pre-installed)
• 1 x 120mm FRGB Rear Fan (pre-installed)
• Accessory Box (screws, cable ties, standoffs, user manual)

3. Setup and Installation

Before starting, ensure you have a clean, static-free workspace. Refer to your motherboard and component manuals for specific installation instructions.

3.1. Preparing the Case

1. Carefully remove the case from its packaging.
2. Place the case on a stable, flat surface.
3. Remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and gently sliding the panel off. Set it aside in a safe place.
4. Remove the opposite metal side panel by unscrewing its thumb screws.

3.2. Motherboard Installation

The BitFenix Graph supports MicroATX and Mini-ITX motherboards.

1. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
2. Align your motherboard with the pre-installed standoffs. Ensure all standoff holes on the motherboard match the case.
3. Secure the motherboard using the provided screws from the accessory box. Do not overtighten.

3.3. Power Supply Unit (PSU)

The case comes with a pre-installed 750W 80+ Bronze PSU located at the bottom rear of the case. Connect the necessary power cables to your motherboard, CPU, graphics card, and storage devices.

3.4. Storage Drive Installation

The case supports 2 x 2.5" drives and 2 x 3.5" drives.

• 2.5" SSD/HDD: Locate the 2.5" drive mounts behind the motherboard tray or in the PSU shroud area. Secure drives with screws.
• 3.5" HDD: Locate the drive cage, typically beneath the PSU shroud. Slide the 3.5" drives into the trays and secure them.

3.5. Fan and Radiator Installation

The case includes 3 x 120mm FRGB front fans and 1 x 120mm FRGB rear fan pre-installed. Additional fan and radiator support:

• Front: Supports up to 3 x 120mm fans or a 360mm radiator.
• Top: Supports up to 2 x 120mm fans or a 240mm radiator.
• Rear: Supports 1 x 120mm fan or a 120mm radiator.

Ensure proper airflow direction for optimal cooling.

3.6. Front Panel Connections

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

• USB 3.0: 2 ports
• USB 2.0: 1 port
• Type-C: Not available

3.7. Cable Management

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics.

4. Operating Instructions

4.1. Powering On

After all components are installed and connected, close both side panels. Connect your monitor, keyboard, mouse, and power cable to the PSU. Press the power button on the front panel to start your system.

4.2. FRGB Lighting Control

The pre-installed FRGB fans provide customizable lighting effects. Control of the FRGB lighting is typically managed via a dedicated button on the case's front I/O panel (if available) or through your motherboard's RGB software. Refer to your motherboard's manual for software-based RGB control.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your PC components.

5.1. Dust Cleaning

• Dust Filters: The BitFenix Graph case features removable dust filters (e.g., top, front, bottom). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before re-installation).
• Interior: Use compressed air to remove dust from internal components, especially CPU coolers, GPU heatsinks, and fan blades. Perform this cleaning in a well-ventilated area.

5.2. Exterior Cleaning

Wipe the exterior surfaces, including the tempered glass panel, with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.

6. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

• System Not Powering On:
  • Ensure the PSU switch is in the 'ON' position.
  • Check all power connections to the motherboard, CPU, and graphics card.
  • Verify front panel power switch cables are correctly connected to the motherboard.
• Fans Not Spinning / RGB Not Working:
  • Check fan power cables and RGB connections to the motherboard or fan controller.
  • Ensure RGB software or physical control button is correctly configured.
• No Display Output:
  • Ensure your monitor is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics).
  • Reseat the graphics card and RAM modules.

For more complex issues, consult your component manuals or contact BitFenix support.

7. Specifications

8. Warranty and Support

BitFenix products are manufactured to high quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official BitFenix website.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact BitFenix customer service through their official website or the contact information provided in your product documentation.

Official BitFenix Website: www.bitfenix.com