Product Overview
The COLAMY 26.18" Counter Height Swivel Bar Stools are designed for comfort and durability, suitable for various settings such as kitchen islands, home bars, or cafes. These stools feature a thick padded seat, an ergonomic backrest, and a 360-degree swivel function for enhanced usability.
Image: Two COLAMY 26.18" Counter Height Swivel Bar Stools in a kitchen setting.
Key Features
- Ultra-Plush Cushioned Comfort: Experience all-day relaxation with the 3.74-inch thick high-density foam seat, wrapped in soft, breathable beige fabric. The ergonomic high backrest (104° reclining angle) contours to your spine, reducing fatigue during long periods of sitting.
- Adjustable Footrest & Height Guide: The steel footrest adjusts to fit counter heights from 34" to 40", while the 26.18" seat height ensures optimal posture. The reinforced metal frame is designed for stability.
- Silent 360° Swivel Design: Precision bearings enable effortless 360° rotation without noise or scratches. Rubber-tipped foot pads protect floors and eliminate squeaks.
- Industrial-Strength Metal Frame: Built with a matte black steel frame featuring exposed rivet details for a modern aesthetic. The rust-resistant coating enhances durability, especially in humid environments.
- Quick Setup & Space-Saving: Designed for assembly in approximately 10 minutes with included tools and clear instructions. Compact dimensions (18.11"W x 20.28"D) allow for efficient use of space.
Components List
Please ensure all components are present before beginning assembly:
- Seat Cushion: 1
- Connector-B: 1
- Connector-C: 1
- Leg: 4
- Bottom Metal Base: 1
- 360° Swivel Function: 1
- M6*30mm Bolt: 1
- M6*18mm Bolt: 14
- M6*30mm Bolt: 4
- M6*25mm Bolt: 2
- Allen Wrench: 1
Setup and Assembly Instructions
Follow these steps to assemble your COLAMY Bar Stool. An assembly video is provided for visual guidance.
- Assemble the Base Frame: Connect Connector-B and Connector-C using the M6*30mm bolt (1 pc). Secure them partially (80% tight) at this stage.
- Attach the Legs: Insert the four legs into the assembled base frame. Use the M6*18mm bolts (14 pcs) to attach the legs to the connectors. Again, tighten screws to 80% at first.
- Attach the Footrest: Secure the square footrest to the legs using the M6*30mm bolts (4 pcs). Ensure the footrest is level.
- Install the Swivel Mechanism: Attach the 360° swivel function to the top of the assembled base frame using the M6*25mm bolts (2 pcs).
- Attach the Seat Cushion: Align the seat cushion with the swivel mechanism and secure it using the remaining bolts.
- Final Tightening: Once all components are in place and the stool is balanced, fully tighten all screws using the provided Allen wrench.
Video: Step-by-step assembly guide for the COLAMY Bar Stool. This video demonstrates how to connect the base components, attach the legs, install the footrest, secure the swivel mechanism, and finally attach the seat cushion, concluding with the final tightening of all screws.
Operating Instructions
360° Swivel Function
The bar stool features a smooth 360-degree swivel. To rotate, simply apply gentle pressure to the seat in the desired direction. The precision bearings ensure quiet and effortless movement.
Footrest Usage
The integrated steel footrest provides support and comfort. It is designed to accommodate various user heights when seated at counter heights between 34" and 40".
Maintenance
Fabric Upholstery Care
- For general cleaning, gently vacuum the fabric to remove dust and loose debris.
- For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain.
- For tougher stains, use a mild fabric cleaner following the product's instructions, testing on an inconspicuous area first.
- Avoid direct sunlight to prevent fading.
Metal Frame Care
- Wipe the metal frame with a soft, damp cloth to remove dust and dirt.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the rust-resistant coating.
- Regularly check and tighten all screws to ensure stability.
Troubleshooting
Stool Feels Unstable or Wobbly
- Ensure all screws are fully tightened. Over time, screws may loosen and require re-tightening.
- Verify the stool is placed on a flat, even surface. Uneven flooring can cause wobbling.
- Check the adjustable foot pads (if applicable) to ensure they are properly adjusted and making full contact with the floor.
Squeaking Noise During Swivel
- The swivel mechanism is designed for silent operation. If squeaking occurs, check for any loose connections in the swivel plate.
- A small amount of silicone-based lubricant can be applied to the swivel mechanism if necessary, avoiding oil-based lubricants that can attract dust.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 20.28"D x 18.11"W x 37.6"H |
| Color | Beige |
| Brand | COLAMY |
| Size | Set of 2 |
| Furniture Finish | Memory Foam |
| Assembly Required | Yes |
| Number of Items | 2 |
| Item Weight | 18.08 pounds |
| Manufacturer | COLAMY |
| Item Model Number | 6241-BE |
| Fabric Type | Fabric |
| Batteries Required | No |
| Included Components | 104° ergo adjustable backrest, Matte black rustproof frame, Pre-installed tools, 10-min setup, Silent swivel & rubber feet, Super soft Fabric cushion |
Important Safety Information
Always ensure the stool is on a stable surface and within the specified counter height range (34" to 40") for safe use. Keep the stool away from heat sources and do not place heavy objects on the backrest to prevent tipping. This product is not intended for use by children or individuals with mobility impairments without proper assistance.