1. Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Always assemble the table according to the instructions provided to ensure stability and prevent tipping.
- Do not exceed the maximum weight recommendation of 120 pounds (54.4 kg) on the tabletop or shelves.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly to prevent choking hazards.
- Place the table on a flat, stable surface.
- Avoid exposing the table to direct sunlight or extreme temperature changes to prevent warping or discoloration.
2. Product Overview and Dimensions
The Tribesigns F2172 console table is designed for use in living rooms, hallways, entryways, or behind a couch. It features a two-tier design for storage and display.
Image 1: Dimensional diagram of the console table. The table measures 70.87 inches in width, 11.81 inches in depth, and 33.46 inches in height. The tabletop thickness is 3.94 inches. The lower shelf is 55.12 inches wide and 10.63 inches deep, with a height of 13.78 inches from the floor.
Key Features:
- Extra Long Design: 70.9 inches wide, providing ample surface area.
- 2-Tier Storage: Open top and bottom shelves for organization and display.
- Robust Construction: Made from high-quality medium-density fiberboard (MDF) for durability.
- Farmhouse & Rustic Style: Light brown wooden finish.
3. Parts List
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.
| Part | Description | Quantity |
|---|---|---|
| A | Tabletop Panel | 1 |
| B | Side Support Panels (Arched) | 2 |
| C | Bottom Shelf Panel | 1 |
| D | Connecting Screws | (Various) |
| E | Allen Wrench | 1 |
Note: The exact number and type of fasteners may vary. Refer to the packaging for a precise list.
4. Assembly Instructions
Assembly is straightforward and typically requires two adults. Follow the numbered steps below.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches. Compare all parts with the provided parts list.
- Attach Side Supports to Bottom Shelf: Secure the two Side Support Panels (B) to the Bottom Shelf Panel (C) using the appropriate screws (D). Ensure the arched sides face inwards and are aligned correctly. Tighten screws firmly but do not overtighten.
- Attach Tabletop: Carefully place the Tabletop Panel (A) onto the top of the assembled side supports. Align the pre-drilled holes. Secure the tabletop to the side supports using the remaining screws (D).
- Final Tightening: Once all parts are assembled, gently rock the table to ensure stability. Then, go back and tighten all screws firmly. Do not overtighten to avoid damaging the wood.
- Placement: Carefully move the assembled console table to its desired location.
Image 2: An illustrative diagram demonstrating the general assembly steps for the console table, showing how the tabletop, side supports, and bottom shelf connect.
5. Usage Guidelines
To ensure the longevity and safe use of your console table, please observe the following guidelines:
- Weight Capacity: Do not place items heavier than 120 pounds (54.4 kg) on the tabletop or shelves. Distribute weight evenly.
- Placement: Position the table against a wall or behind a sofa for stability. Avoid placing it in high-traffic areas where it might be easily bumped.
- Surface Protection: Use coasters under drinks and placemats under decorative items to protect the surface from moisture and scratches.
- Children and Pets: Supervise children and pets around the table to prevent accidents.
Image 3: The console table positioned in a living room, showcasing its use for displaying lamps, books, and decorative items.
6. Maintenance and Care
Proper care will help maintain the appearance and extend the life of your console table.
- Cleaning: Wipe the surface with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Clean spills immediately with a dry cloth to prevent staining or water damage.
- Heat and Moisture: Do not place hot items directly on the surface. Protect from excessive moisture.
- Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
- Fasteners: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Screws are loose; uneven floor. | Check and tighten all screws. Move the table to a level surface or use furniture pads to stabilize. |
| Parts do not align | Incorrect orientation of parts; screws not fully loosened. | Review assembly steps and diagrams. Loosen screws slightly, adjust parts, then re-tighten. |
| Surface damage (scratches, stains) | Impact, sharp objects, spills. | For minor scratches, use a furniture repair marker. For stains, clean immediately with a damp cloth. Prevent future damage with coasters and placemats. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Tribesigns |
| Model Number | F2172 |
| Product Dimensions (D x W x H) | 11.81"D x 70.86"W x 31.5"H |
| Item Weight | 77 Pounds (34.9 kg) |
| Maximum Weight Recommendation | 120 Pounds (54.4 kg) |
| Frame Material | Engineered Wood (MDF) |
| Top Material Type | Engineered Wood |
| Color | Light Brown |
| Assembly Required | Yes |
| Indoor/Outdoor Usage | Indoor |
9. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Tribesigns customer service. Our team is ready to assist you and aims to provide a satisfying response within 24 hours.
For further support, please visit the official Tribesigns website or refer to your purchase documentation for specific contact details.
Online Resources: Tribesigns Official Store
