Instruction Manual

Introduction

Thank you for purchasing the Feit Electric 14-inch Black Rectangular Lantern. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1: Front view of the Feit Electric 14-inch Black Rectangular Lantern, showcasing its modern design with a clear glass cylinder and an exposed filament bulb.

Important Safety Information

• Always turn off the power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
• Consult a qualified electrician if you are unsure about the installation process.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Ensure all electrical connections are made in accordance with local codes and ordinances.
• Do not exceed the specified wattage for the bulb. This fixture includes an integrated LED bulb.
• Handle glass components with care to prevent breakage.
• Keep packaging materials away from children.

Package Contents

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Feit Electric customer service for assistance.

Figure 2: The product packaging for the Feit Electric 14-inch Black Rectangular Lantern, showing the lantern inside its box with product details and features.

Typically included components:

• 1 x Lantern Fixture with integrated LED bulb
• 1 x Mounting Plate
• 2 x Mounting Screws
• 3 x Wire Nuts
• 1 x Gasket/Seal
• 1 x Instruction Manual (this document)

Setup and Installation

Before you begin, ensure you have the following tools:

• Phillips Head Screwdriver
• Flat Head Screwdriver
• Wire Strippers
• Electrical Tape
• Safety Glasses
• Ladder (if necessary)

Installation Steps:

1. Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the outdoor light fixture. Turn off the power completely before proceeding. Verify the power is off using a voltage tester.
2. Remove Old Fixture (if applicable): Carefully disconnect and remove any existing light fixture from the junction box.
3. Attach Mounting Plate: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is level and firmly attached.
4. Make Electrical Connections:
   • Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
   • Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box using a wire nut. If no ground wire is available in the junction box, connect to the ground screw on the mounting plate.
   • Ensure all connections are secure and cover wire nuts with electrical tape for added insulation.
5. Mount the Fixture: Carefully align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws, ensuring a snug fit against the wall. If a gasket is provided, place it between the fixture and the mounting surface for a weather-tight seal.
6. Restore Power: Once the fixture is securely installed and all connections are made, restore power at the circuit breaker.

Figure 3: The Feit Electric 14-inch Black Rectangular Lantern installed on the exterior wall of a house during daylight, demonstrating its aesthetic integration.

Operating Instructions

This Feit Electric lantern features a built-in Dusk-to-Dawn sensor, allowing for automatic operation.

• Automatic Operation: The integrated sensor will detect ambient light levels. The lantern will automatically turn on at dusk and turn off at dawn.
• Manual Override (if applicable): If connected to a wall switch, the fixture can be manually turned on or off. For continuous automatic operation, ensure the wall switch remains in the "ON" position.
• Dimmable Feature: This fixture is dimmable. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to the dimmer switch manufacturer's instructions for proper installation and operation.

Figure 4: The Feit Electric 14-inch Black Rectangular Lantern illuminated at night on the exterior of a house, showcasing its soft white light output.

Maintenance

The Feit Electric 14-inch Black Rectangular Lantern is designed for minimal maintenance.

• Cleaning: To clean the fixture, ensure the power is off. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Bulb Replacement: This fixture features an integrated LED bulb designed for long life. The bulb is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact Feit Electric customer service for assistance.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure safe and proper operation.

Troubleshooting

Specifications

Warranty and Support

Feit Electric products are manufactured to the highest quality standards. For warranty information, technical support, or to inquire about replacement parts, please contact Feit Electric customer service directly. Please have your model number (B0F8DYQLSF) and purchase date available when contacting support.

Visit the official Feit Electric website for contact details and additional product information: www.feit.com