1. Introduction
This manual provides instructions for the UBORSY RC-92T Replacement Remote Control, designed for specific Harbor Breeze ceiling fan models. This remote control operates on a 315 MHz frequency and offers 3-speed fan control and light dimming capabilities.
Important Note: This product includes the remote control only; the receiver is not included. Please verify your existing fan system uses a 315 MHz frequency and is compatible with the listed models before use.
Image 1.1: The UBORSY RC-92T Replacement Remote Control, a white handheld device with five gray buttons for fan speed, power, and light control.
2. Compatibility
The UBORSY RC-92T Replacement Remote Control is specifically designed to replace the following Harbor Breeze ceiling fan remote models:
- A25-TX001-R1
- A25-TX005R
- A25-TX007R
- A25-TX013
- RRTX001R
- ZJF-RT01A
This remote is NOT compatible with KUJCE10716 / A25-TX00I / TR258A / KUJCE10512 models. Please check the part number on the back of your original remote to ensure compatibility.
Image 2.1: A visual guide indicating compatible and incompatible FCC ID/Model numbers for the replacement remote. Compatible models include A25-TX001-R1, A25-TX005R, A25-TX007R, A25-TX013, RRTX001R, ZJF-RT01A. Incompatible models include KUJCE10716, TR258B, KUJCE10512, TR258A, A25-TX00I, KUJST18003, RRTX00I.
Image 2.2: Illustration showing the remote is compatible with most downrod style ceiling fans and various dimmable light bulbs (Halogen, Incandescent, Dimmable LED, Dimmable CFL). It is not recommended for wall-mounted or exhaust-type fans. Non-dimmable LED/CFL bulbs only support ON/OFF functionality.
3. Package Contents
The package includes the following items:
- 1 x Remote Control
- 1 x Wall Mount Holder
- 1 x User Manual (this document)
- 2 x Screws for wall mount installation
Image 3.1: Diagram illustrating the package contents, including the remote control (approximately 1.5 inches wide by 4.5 inches long), the wall mount holder (approximately 2 inches high by 0.7 inches deep), screws, and the user manual.
4. Setup
4.1 Battery Installation
The remote control requires one 12V battery (not included) for power supply. To install the battery:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover off.
- Insert a new 12V battery, ensuring correct polarity (+/-).
- Replace the battery compartment cover.
4.2 Pairing Method (Using the Built-in Learning Key)
To synchronize the remote control with your ceiling fan:
- Turn off the power to the ceiling fan using the wall switch or circuit breaker.
- Turn the power back on.
- Within 30 seconds of restoring power, press and hold the 'Learn Key' located inside the battery compartment of the remote control.
- The indicator light on the remote will flash. If pairing is successful, the ceiling fan will turn on at a low speed, and the indicator light will go out.
Image 4.1: An illustration demonstrating the pairing process. It shows a hand holding the remote control towards a ceiling fan, and a close-up of the remote's battery compartment revealing the 'Learn Key' button and the slot for the 12V battery (not included).
5. Operating Instructions
The remote control allows for convenient operation of your ceiling fan and light from up to 60 feet away.
5.1 Button Functions
- Fan Speed Buttons (Three dots, two dots, one dot): Adjust the fan speed to High, Medium, or Low.
- Fan Power / Light Delay Off Button (Power symbol): Turns the fan off and initiates a 60-second delay before turning the light off.
- Light Control Button (Sun symbol): Turns the lights on or off. Press and hold this button to brighten or dim the light.
The remote features tactile buttons with raised textured dots on the speed and dimming controls, aiding visually impaired users in confident operation without relying on sight.
Image 5.1: A user holding the remote control, pointing it towards a ceiling fan in a living room. Overlays highlight the blue indicator light, 3-speed control (High/Med/Low/Off), Learn Key, and Light Dimmer Button (On/Off/Dimmer).
Image 5.2: A detailed diagram of the remote control, labeling each button: High Fan Speed (three dots), Medium Fan Speed (two dots), Low Fan Speed (one dot), Fan Power / Light Delay Off Mode (power symbol), and Light Control (sun symbol). It also highlights the tactile buttons for blind-friendly use.
6. Maintenance
This remote control requires minimal maintenance. Keep the remote clean and dry. Avoid exposing it to extreme temperatures or direct sunlight. Replace the 12V battery when the remote's performance diminishes.
7. Troubleshooting
If the remote control is not functioning as expected, consider the following:
- Check Battery: Ensure the 12V battery is correctly installed and has sufficient power. Replace if necessary.
- Re-pair Remote: Follow the pairing instructions in Section 4.2 to re-synchronize the remote with your ceiling fan.
- Verify Compatibility: Confirm that your ceiling fan model and frequency (315 MHz) are compatible with this remote control (refer to Section 2).
- Obstructions: Ensure there are no obstructions between the remote control and the ceiling fan receiver.
- Distance: Operate the remote within its effective range of approximately 60 feet.
8. Specifications
| Brand | UBORSY |
| Model | RC-92T Remote |
| Special Feature | Light Dimmer |
| Color | White |
| Max Number of Supported Devices | 2 |
| Compatible Devices | Harbor Breeze Ceiling Fan |
| Frequency | 315 MHz |
| Battery Type | 12V (not included) |
| Operating Range | Up to 60 feet |
9. Warranty and Support
Information regarding product warranty and customer support is not available in the provided product details. Please refer to the product packaging or contact the seller directly for warranty claims or technical assistance.