Introduction
This high-quality Ledvion double LED TL batten luminaire is designed for both indoor and outdoor use. It features a robust, impact-resistant plastic housing, ensuring durability and a long service life. With an IP65 rating, it is protected against dust and water, making it suitable for various environments. The luminaire is supplied with all necessary installation materials, including stainless steel fixings and connectors, for quick and easy setup. It is compatible with various LED TL tubes, providing a reliable and long-lasting lighting solution for professional and domestic applications.
Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not modify the luminaire or its components.
- Do not operate the luminaire if any part is damaged.
- Keep away from flammable materials.
- This product is rated IP65 for dust and water protection. Ensure all seals and connections are properly secured during installation to maintain this rating.
- The luminaire is designed for use with compatible LED TL tubes. Using incompatible tubes may cause damage or safety hazards.
What's in the Box
The package includes the following components:
- Ledvion Double LED TL Batten Luminaire (60CM)
- LED TL Tube (4000K, 2x60cm)
- Stainless Steel Fixing Materials
- Connectors
Image: The luminaire housing with stainless steel clips and internal wiring, illustrating the components.
Setup and Installation
Follow these steps for proper installation of your Ledvion LED TL Batten Luminaire:
- Preparation: Ensure the power supply to the installation area is turned off at the main circuit breaker. Gather all necessary tools (drill, screwdriver, wire strippers, etc.).
- Mounting the Luminaire:
- Position the luminaire in the desired location. Mark the drilling points for the mounting clips on the ceiling or wall.
- Drill holes at the marked points and insert appropriate wall plugs (if necessary).
- Secure the stainless steel mounting clips to the surface using screws.
- Attach the luminaire housing to the mounted clips. The clips are designed for easy attachment and secure holding.
- Wiring:
- Open the luminaire housing carefully.
- Connect the electrical wires from your power supply to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) according to local wiring standards.
- Secure all connections tightly.
- Ensure the cable gland is properly tightened to maintain the IP65 rating.
- Installing LED TL Tubes:
- Insert the provided LED TL tubes into the lamp holders within the luminaire. Ensure they are firmly seated.
- The luminaire is designed for flicker-free operation with the included 4000K natural light LED tubes.
- Final Assembly: Close the luminaire housing, ensuring all latches are securely fastened to maintain the IP65 dust and water protection.
- Testing: Restore power at the main circuit breaker and test the luminaire.
Image: An installed Ledvion LED TL Batten Luminaire on a ceiling, demonstrating its appearance in operation.
Image: A detailed view of the included flicker-free LED tube, highlighting its 4000K natural light output.
Operating Instructions
Once properly installed and connected to the power supply, the Ledvion LED TL Batten Luminaire operates simply:
- Power On/Off: Use the wall switch connected to the luminaire's circuit to turn the light on or off.
- Light Output: The luminaire provides 1120 lumens of 4000K natural white light, suitable for various applications.
Maintenance
Regular maintenance ensures optimal performance and longevity of your luminaire:
- Cleaning: Disconnect power before cleaning. Wipe the exterior of the luminaire with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic housing.
- Inspection: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified technician.
- Tube Replacement: If an LED TL tube needs replacement, ensure the power is off. Carefully remove the old tube and insert a new, compatible LED TL tube.
Image: The luminaire's IP65 rating, indicating its resistance to water and dust, which simplifies cleaning.
Troubleshooting
If you encounter issues with your luminaire, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Luminaire does not turn on. | No power supply, loose wiring, faulty LED tube. | Check circuit breaker. Verify all wiring connections. Replace LED tube if necessary. |
| Light flickers. | Loose connection, incompatible LED tube, power fluctuations. | Check connections. Ensure compatible LED tubes are used. Consult an electrician if power fluctuations are suspected. |
| Reduced light output. | Dust accumulation, aging LED tube. | Clean the luminaire. Consider replacing the LED tube if it has reached its end of life. |
If the problem persists after trying these solutions, please contact customer support.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Ledvion |
| Model Number | LV30016-4000K |
| Product Dimensions | 66 x 16 x 7 cm |
| Weight | 970 g |
| Style | Batten Luminaire |
| Color Temperature | 4000K (Natural White) |
| Shape | Tubular (T) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Voltage | 230 Volts |
| Power Source | Mains Powered |
| Bulb Type | LED |
| Wattage | 7 Watts |
| Incandescent Equivalent | 60 Watts |
| Luminous Flux | 1120 Lumens |
| IP Rating | IP65 (Dust and Water Protected) |
| Energy Efficiency Rating | F |
| Country of Origin | China |
| First Available | 26 August 2025 |
Image: Dimensional drawing of the luminaire and LED tube.
Image: EU Energy Label for the Ledvion luminaire. For more details, visit eprel.ec.europa.eu/qr/2026176.
Warranty Information
This Ledvion LED TL Batten Luminaire comes with a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.
Please retain your proof of purchase for warranty claims.
Image: The luminaire's construction details and warranty period.
Customer Support
For technical assistance, warranty claims, or any questions regarding your Ledvion LED TL Batten Luminaire, please contact Ledvion customer service through the retailer where the product was purchased or visit the official Ledvion website for contact details.
When contacting support, please have your model number (LV30016-4000K) and proof of purchase readily available.
