Introduction
Thank you for choosing the HOROW Artistic Smart Bidet Toilet HR-T38P. This advanced toilet combines modern design with intelligent features for enhanced hygiene and comfort. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Important Safety Information
- Ensure all electrical connections are properly grounded and meet local codes.
- Do not immerse the product in water or spray water directly onto electrical components.
- Disconnect power before performing any maintenance or cleaning.
- Keep children and individuals with reduced physical, sensory, or mental capabilities away from the product unless supervised.
- This product is designed for indoor use only.
- Avoid using abrasive cleaners or harsh chemicals that may damage surfaces.
- In case of power outage, the toilet has a power outage flush function. Consider purchasing an optional backup battery for extended functionality during outages.
Package Contents
Verify that all components are present before beginning installation:
- HOROW Artistic Smart Bidet Toilet (HR-T38P)
- Floor flange
- Valve
- Mounting accessory kit
- Mounting Template
- Wax ring
- Remote control
- Stainless steel hose
- Gaskets
- Wrench set
Note: Some components may be pre-installed or packaged within the main unit.
Setup and Installation
Professional installation is recommended. Ensure the installation area has a standard 12-inch rough-in from the wall to the center of the drain pipe and a GFCI electrical outlet nearby.
1. Site Preparation and Measurement
Before installation, measure the distance from the wall to the center of your floor drain. The HR-T38P requires a standard 12-inch (300mm) rough-in for proper fit. Ensure adequate space around the toilet for maintenance and operation.
Image: Detailed dimensions of the HOROW HR-T38P Smart Toilet, highlighting the 12-inch rough-in requirement from the wall to the drain center, and overall measurements of 27.4" (length) x 15.4" (width) x 19.5" (height) with a seat height of 17.5".
2. Flange Installation
Install the provided floor flange over the drain pipe. Mark and drill holes for the mounting bolts as per the mounting template. Secure the flange to the floor using the provided screws and mounting blocks.
Refer to the "HOROW Artistic Bidet Toilet Combo Installation" video for visual guidance on flange and toilet base connection.
Video: This video demonstrates the installation process for the HOROW Artistic Bidet Toilet, including how to install the flange, connect the water supply, and secure the toilet to the floor.
3. Ceramic Installation
Place the wax ring onto the bottom outlet of the toilet. Carefully align the toilet with the installed flange and lower it into position. Secure the toilet to the floor using the mounting bolts and decorative caps provided.
4. Water Supply Connection
Connect the toilet's water supply hose to the T-angle valve on your water line. Ensure all connections are tight to prevent leaks. The HR-T38P features dual waterlines, ensuring clean water for bidet functions and separate water for flushing.
Image: Illustration of the dual waterline system, showing separate paths for fresh, filtered bidet water and flush water, preventing cross-contamination.
5. Power Connection and Testing
Plug the toilet into a GFCI-protected electrical outlet. Perform a test flush to check for leaks and proper operation of the flushing mechanism. Ensure all smart features, suchs as auto open/close and bidet functions, are working correctly.
Refer to the "HR-T38P Smart Toilet" video for a general overview of the toilet's features and operation.
Video: This video provides a comprehensive demonstration of the HR-T38P Smart Toilet's various features, including automatic lid operation, bidet functions, and flushing capabilities.
Apply glass cement along the base of the toilet where it meets the floor for a secure and finished seal.
Operating Instructions
The HOROW HR-T38P Smart Bidet Toilet offers a range of intelligent features for a personalized experience. All functions can be controlled via the included remote control or integrated side controls.
Remote Control Overview
The remote control provides access to all bidet and toilet settings. Familiarize yourself with the button layout for optimal use.
Refer to the "HR-T38 Remote Control Operation" video for a detailed guide on using the remote control.
Video: This video demonstrates the various functions and settings accessible via the remote control for the HR-T38 Smart Toilet, including wash modes, temperature adjustments, and other smart features.
1. Automatic Lid Operation
- Auto Open: The lid automatically opens when you approach the toilet.
- Auto Close: The lid gently closes after you leave, providing a hands-free experience.
- Foot Kick Open/Close: A foot sensor allows for hands-free opening and closing of the seat and lid.
Image: A person approaching the smart toilet, illustrating the automatic lid opening feature. The image also highlights the foot kick sensor for hands-free opening of the seat and lid, and a foot kick flush option.
2. Bidet Functions
Customize your cleaning experience with multiple wash modes and adjustable settings:
- Feminine Wash: Gentle wash for sensitive skin.
- Posterior Wash: Powerful bubble wash with adjustable pressure.
- Oscillating Wash: Deep, thorough cleaning with rhythmic nozzle movement.
- Warm & Cool Massage: Alternating water temperatures for ultimate comfort.
- Water Temperature: Adjust to 3 levels (Warm, Medium, Hot).
- Water Pressure: Adjust the intensity of the water spray.
- Nozzle Position: Adjust the nozzle's position for optimal cleaning. The curved nozzle design offers wider reach and better coverage.
Image: An illustration detailing the four primary bidet wash modes: Gentle Feminine Wash, Powerful Bubble Wash, Oscillating Wash, and Warm & Cool Massage, each with a brief description of its function.
Image: A visual comparison between a curved bidet nozzle and a straight nozzle, demonstrating how the curved design provides wider reach and better coverage, reducing contamination risk.
3. Heated Seat and Warm Air Dryer
- Heated Seat: Enjoy a comfortable experience with 4 adjustable levels for the elongated heated seat.
- Warm Air Dryer: After washing, use the warm air dryer to reduce toilet paper consumption. Adjust the warmth to your preference.
Image: A collage showcasing key features of the smart toilet, including the heated seat, warm air dryer, remote control, digital display, night light, and the power outage flushing mechanism.
4. Flushing Options
The HR-T38P offers multiple flushing methods and powerful performance:
- 1000g MaP Flush Score: Features a powerful pump for complete waste removal with a single flush.
- Dual-Flush Options: Choose between 0.9 GPF for a half flush and 1.32 GPF for a full flush to conserve water.
- Hands-Free Flushing:
- Automatic Flush: Flushes automatically after you leave the seat.
- Foot Kick Flush: Activate flush with a foot sensor.
- Remote Control Flush: Use the remote to initiate a flush.
- Knob Flush: Manual flush option.
- Power Outage Flush: Built-in battery backup ensures flushing works reliably during power outages. (Battery backup sold separately).
Image: An internal view of the toilet's flushing mechanism, detailing the 100W power flush, 360-degree siphon jet, jet-away channel, and 50mm trapway, contributing to its 1000g MaP flush score.
Image: An overhead view of the smart toilet illustrating the various hands-free flushing methods available, including remote control flush, automatic off-seat flush, knob flush, and foot kick flush.
Image: The smart toilet demonstrating its power outage flush feature, which is supported by a built-in battery backup (sold separately) to ensure functionality during electrical interruptions.
5. Smart Lighting and Deodorization
- Night Light: A built-in LED night light provides a soft glow for nighttime use, eliminating the need for bright bathroom lights.
- Smart Lighting: Set the tone with 4 selectable glow colors to match your mood and space.
- Deodorization: Built-in deodorization keeps the air fresh without the need for sprays or harsh chemicals.
Image: The smart toilet displaying its smart lighting feature, with customizable glow colors to enhance bathroom ambiance.
Image: An illustration demonstrating the toilet's built-in deodorization system, which circulates air to keep the bathroom fresh without external sprays.
Maintenance and Cleaning
- Self-Cleaning Nozzle: The bidet nozzle performs a self-cleaning cycle before and after each use, ensuring maximum hygiene. It also features UV sterilization.
- Removable Nozzle: The nozzle is removable for easy cleaning and maintenance, preventing limescale buildup.
- Foam Barrier: A 30mm thick foam barrier prevents splashes and odors during use. Foam refill sold separately.
- Self-Cleaning Glaze: The toilet bowl features a self-cleaning glaze, pre-wetting, and foam shield to keep it cleaner longer with less scrubbing.
- General Cleaning: Use mild, non-abrasive cleaners and a soft cloth to clean the exterior and seat. Avoid harsh chemicals.
Image: A close-up view of the self-cleaning bidet nozzle, illustrating its UV sterilization capability and water spray for maintaining hygiene after each use.
Image: A comparison showing the advantages of a removable bidet nozzle (anti-limescale, easy upkeep, clean rinse) versus a fixed nozzle (limescale-prone, hard to clean, contamination risk).
Image: An illustration of the 30mm thick foam barrier within the toilet bowl, providing hygienic protection against splashes, odors, bacteria, and aerosols during flushing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/functions unresponsive | Power cord unplugged, GFCI tripped, power outage. | Check power connection, reset GFCI, ensure power is restored. Consider optional backup battery. |
| Weak flush | Low water pressure, obstruction in trapway. | The built-in pump assists with low water pressure. Check for obstructions. |
| Bidet spray not working or weak | Water supply valve closed, nozzle clogged, water pressure setting too low. | Ensure water supply is open. Clean the nozzle. Adjust water pressure settings on the remote. |
| Lid not opening/closing automatically | Proximity sensor obstructed or dirty. | Clean the proximity sensor. Ensure no objects are blocking the sensor's path. |
| Unpleasant odors | Deodorization function off, foam barrier not active. | Ensure deodorization is active. Check foam barrier level (foam refill sold separately). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | HR-T38P |
| Brand | HOROW |
| Color | White |
| Material | Ceramic (Toilet), Polypropylene (PP) (Seat) |
| Item Weight | 115.8 pounds (52.62 Kilograms) |
| Product Dimensions | 27.4 x 15.4 x 19.5 inches |
| Installation Type | Floor Mounted |
| Voltage | 120 Volts (AC) |
| Flush Score (MaP) | 1000g |
| Dual-Flush Options | 0.9 GPF (Half), 1.32 GPF (Full) |
| ADA Compliant Height | Yes (17.5 inches seat height) |
| Heated Seat | Yes, 4 adjustable levels |
| Bidet Functions | Feminine Wash, Posterior Wash, Oscillating Wash, Warm & Cool Massage |
| Nozzle | Self-cleaning, UV sterilization, Removable, Curved design |
| Air Dryer | Yes, warm air |
| Deodorization | Yes, built-in |
| Lid Operation | Auto Open/Close, Foot Kick Open/Close |
| Flushing Methods | Automatic, Foot Kick, Remote Control, Knob |
| Night Light | Yes, 4 selectable colors |
| Power Outage Flush | Yes (with optional battery backup) |
Warranty and Support
HOROW provides a 1-year limited warranty for the HR-T38P Smart Bidet Toilet. Additionally, lifetime after-sales service and troubleshooting guidance are available. For any inquiries or support, please contact our customer service center. Messages will be responded to within 12 hours.
For further assistance, please visit the HOROW Store on Amazon.
