Introduction
This manual provides instructions for the assembly, operation, and maintenance of your ELYKEN Adjustable Height TV Tray Table, Model HNT05. This versatile C-shaped end table is designed for use with couches, recliners, and beds, offering adjustable height and a 360° swivel top for convenience. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Do not exceed the maximum weight capacity of 50 lbs (22.7 kg). Overloading may cause instability and damage.
- Always use the anti-slip mat provided to prevent tipping and ensure stability on various floor surfaces.
- Follow all assembly instructions carefully. Incorrect assembly can lead to instability.
- Consider using wall anchors for enhanced stability, especially if the table is frequently moved or used in high-traffic areas.
- Keep small parts away from children during assembly to prevent choking hazards.
Package Contents
Before assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
| Component | Quantity |
|---|---|
| Tabletop | 1 |
| Vertical Support Pole | 1 |
| Base | 1 |
| Height Adjustment Knob | 1 |
| Assembly Screws | Set |
| Allen Wrench (Installation Tool) | 1 |
Setup and Assembly
The ELYKEN TV Tray Table is designed for straightforward assembly. No additional tools are required beyond those provided. Follow these steps for quick installation:
- Attach the vertical support pole to the base using the provided screws and Allen wrench. Ensure the connection is secure.
- Slide the tabletop onto the top of the vertical support pole.
- Insert and tighten the height adjustment knob into the designated hole on the vertical support pole to secure the tabletop at your desired height.
- Place the anti-slip mat under the base for added stability and floor protection.
For a visual guide, please refer to the assembly video below:
Video: ELYKEN TV Tray Table Assembly Guide. This video demonstrates the step-by-step process for assembling your TV tray table, including attaching the pole to the base and securing the tabletop.
Operating Instructions
Adjusting Height
The table's height can be customized from 18 inches to 33 inches to suit various seating arrangements, such as sofas, beds, or chairs. To adjust the height:
- Loosen the height adjustment knob by turning it counter-clockwise.
- Carefully raise or lower the tabletop to the desired height.
- Tighten the height adjustment knob by turning it clockwise until the tabletop is securely fixed in place.
Image: The ELYKEN TV Tray Table demonstrating its adjustable height range from 18 to 33 inches, suitable for various furniture types. The image also highlights the 360-degree swivel functionality of the tabletop.
Utilizing the 360° Swivel Top
The tabletop features a smooth 360° rotation, allowing easy access to items from any angle without moving the entire table.
- Simply rotate the tabletop to position your drinks, snacks, laptop, or other essentials within comfortable reach.
- The C-shaped design allows the base to tuck neatly under furniture, maximizing space efficiency.
Image: The ELYKEN TV Tray Table demonstrating its 360-degree swivel capability, positioned beside a bed. The tabletop holds a magazine and headphones, illustrating convenient access.
Stable Base Design
The table is equipped with a weighted metal base and an anti-slip mat to ensure stability and prevent tipping, even when fully extended or supporting its maximum load.
Image: A detailed view of the ELYKEN TV Tray Table's weighted metal base, highlighting the anti-slip mat for enhanced stability and floor protection.
Maintenance
- Cleaning: To clean the tabletop and metal frame, wipe with a soft, damp cloth and a mild, non-abrasive detergent. Avoid harsh chemicals that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary to maintain stability.
- Spill Management: The tabletop is designed to be water-resistant. In case of spills, wipe them immediately to prevent potential damage to the engineered wood surface.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table wobbles | Loose assembly screws; uneven surface | Ensure all assembly screws are tightened. Place the table on a flat, even surface. Verify the anti-slip mat is correctly positioned. |
| Difficulty adjusting height | Adjustment knob not fully loosened; mechanism obstructed | Ensure the height adjustment knob is fully loosened before attempting to change height. Check for any obstructions in the pole mechanism. |
| Tabletop does not swivel smoothly | Tabletop overloaded; swivel mechanism dirty | Ensure the tabletop is not overloaded beyond its capacity. Clean the swivel mechanism if visible debris is present. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ELYKEN |
| Model Number | HNT05 |
| Product Dimensions (D x W x H) | 11.8" x 15.7" x 18"-33" (Adjustable Height) |
| Tabletop Dimensions (W x D) | 15.7" x 11.8" |
| Base Dimensions (W x D) | 15.7" x 11.8" |
| Item Weight | 10.4 pounds (4.7 kg) |
| Maximum Weight Capacity | 50 pounds (22.7 kg) |
| Frame Material | Engineered Wood, Metal |
| Top Color | Rustic Brown |
| Special Features | Adjustable Height, 360° Swivel, Easy Assembly |
| Indoor/Outdoor Usage | Indoor |
Image: Detailed dimensions of the ELYKEN TV Tray Table, illustrating its width, depth, and adjustable height range from 18 inches to 33 inches.
Warranty and Support
ELYKEN products are manufactured with quality and customer satisfaction in mind. For any questions, technical support, or warranty inquiries regarding your Adjustable Height TV Tray Table (Model HNT05), please contact ELYKEN customer service through your retailer or the official ELYKEN website. Please have your model number (HNT05) and purchase information ready when contacting support.