VINGLI Counter Height Swivel Bar Stools (Model G52006861) Instruction Manual

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your VINGLI Counter Height Swivel Bar Stools. Please read all instructions carefully before assembly and use. Keep this manual for future reference.

Safety Information

WARNING: Do not exceed the maximum weight limit of 300 pounds. Always use the stool with caution, especially when swiveling, to prevent tipping and potential injury.

• Ensure all bolts and screws are securely tightened before use.
• Do not stand on the stool.
• Keep children away from the assembly area.
• Use on a flat, stable surface only.

Package Contents

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact VINGLI customer support.

• Seat with Backrest (2 units)
• Metal Base Frame with Footrest (2 units)
• Rotary Device/Swivel Mechanism (2 units)
• Assembly Hardware (screws, washers, Allen wrench)
• Instruction Manual (this document)

Assembly Instructions

Follow these steps to assemble your VINGLI Counter Height Swivel Bar Stools. Assembly is required.

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
2. Attach Rotary Device to Seat: Align the rotary device (swivel mechanism) with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and washers. Do not overtighten initially.
3. Attach Base Frame to Rotary Device: Connect the metal base frame to the rotary device. Ensure proper alignment. Secure with the remaining screws and washers.
4. Tighten All Connections: Once all parts are loosely assembled, gradually tighten all screws using the Allen wrench until secure. Do not overtighten to avoid damaging the components.
5. Inspect Stability: Gently shake the assembled stool to ensure it is stable. If any wobbling occurs, re-check all connections and tighten as necessary.

Image: Key components including the comfortable backrest, curved cushion, rotary device, and footrest.

Image: Detailed dimensions of the bar stool and the 300 lbs weight capacity.

Operating Instructions

• Swivel Function: The stool features a 360° swivel mechanism. To rotate, simply apply gentle pressure to the seat in the desired direction.
• Weight Capacity: The maximum weight capacity for each stool is 300 pounds. Do not exceed this limit to ensure safety and product longevity.
• Placement: Position the stools on a level surface to prevent instability.

Maintenance

• Cleaning the Fabric: The teddy fleece upholstery is designed for easy cleaning. For light spills, gently blot with a clean, damp cloth. For tougher stains, use a mild fabric cleaner and follow the product instructions. Avoid harsh chemicals.
• Cleaning the Metal Frame: Wipe the metal legs and footrest with a soft, dry cloth. For smudges, a slightly damp cloth can be used, followed by immediate drying to prevent water spots.
• Regular Checks: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the fabric.

Troubleshooting

• Stool is Wobbly: Ensure all assembly screws are fully tightened. Check that the stool is placed on a flat, even surface.
• Swivel is Stiff: The swivel mechanism should operate smoothly. If it feels stiff, ensure no debris is obstructing the mechanism. Avoid applying lubricants unless specifically recommended by the manufacturer.
• Noise During Use: Check for loose connections. Tighten any loose screws.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the purchase documentation or contact VINGLI directly through their official website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.

VINGLI Customer Service: Visit the VINGLI Store on Amazon