1. Important Safety Information
Please read and understand all instructions before beginning assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in serious injury.
- Always assemble the bed on a soft, clean surface to prevent damage to the product.
- Ensure all parts are securely fastened before use. Periodically check all connections and tighten as necessary.
- Do not allow children to climb on the bed frame or roof structure.
- Keep small parts away from children during assembly to prevent choking hazards.
- Use only the mattress size recommended for a full-size bed.
- Do not overload storage drawers or shelves.
2. Included Components
Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, contact customer support.
- Bed Frame (Headboard, Footboard, Side Rails)
- Roof Structure
- Slats and Support Legs
- Storage Drawers (2 units)
- Wall-side Storage Shelves
- LED Light Strip
- Hardware Pack (screws, bolts, nuts, Allen wrench)
Note: Some components may be pre-assembled.
3. Setup and Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two adults for assembly.
Step-by-Step Assembly Guide
Step 1: Assemble the Headboard Section
Image description: An exploded view showing how to connect the headboard (part 6) to the two vertical posts (parts 2 and 3) using screws. Part 5, a horizontal support, is also shown attached to the headboard.
Attach the vertical posts (2, 3) to the headboard (6) using the provided hardware. Ensure the horizontal support (5) is correctly aligned and secured.
Step 2: Assemble the Footboard Section
Image description: An exploded view illustrating the connection of the footboard (part 5) to its two vertical posts (parts 1 and 4) with screws.
Connect the vertical posts (1, 4) to the footboard (5) using the designated screws. Make sure all connections are firm.
Step 3: Install Center Support Beam
Image description: An exploded view showing the center support beam (part 15) with multiple support legs (part 16) attached, and how it connects to the bed frame's side rails (parts 7).
Attach the support legs (16) to the center support beam (15). Then, secure the center support beam to the side rails (7) of the bed frame.
Step 4: Connect Headboard, Footboard, and Side Rails
Image description: An isometric view of the bed frame showing the headboard (part 6), footboard (part 5), and side rails (part 7) being connected to form the main structure. The center support beam (part 15) is already in place.
Connect the assembled headboard and footboard sections to the side rails (7) using the appropriate bolts and nuts. Ensure all four corners are tightly secured.
Step 5: Install Bed Slats
Image description: An isometric view of the bed frame with wooden slats (part 14) being laid across the side rails and center support beam. The slats are evenly spaced.
Place the wooden slats (14) evenly across the bed frame, resting them on the side rails and the center support beam. Secure each slat with screws as indicated in the diagram.
Step 6: Assemble Storage Drawers
Image description: An exploded view of a single storage drawer, showing the front panel (part 10), side panels (parts 8, 13), and bottom panel (parts 11, 12) being assembled.
Assemble the drawer components (8, 10, 11, 12, 13) according to the diagram. Ensure the bottom panel is securely fitted and the drawer slides smoothly.
Step 7: Assemble Wall-Side Storage Shelves
Image description: An exploded view of the wall-side storage shelf unit, showing the main shelf body (parts 10, 11, 12) and its side supports (parts 8, 9, 13) being connected.
Assemble the wall-side storage shelves (8, 9, 10, 11, 12, 13) as shown. These shelves will attach to the headboard section of the bed.
Step 8: Final Assembly of Bed Frame and Storage
Image description: An isometric view of the fully assembled bed frame, showing the headboard, footboard, side rails, slats, and the integrated wall-side storage shelves (part 10) and drawers (part 12) in their final positions.
Integrate the assembled storage shelves (10) and drawers (12) into the bed frame. Ensure all components are aligned and securely fastened. Double-check all screws and bolts for tightness.
Assembly Video Guide
Video description: An official installation video demonstrating the assembly process for a similar full kids bed. This video provides a visual guide to complement the written instructions.
4. Operating Instructions
Using the LED Lights
The LED light strip is designed to be wrapped around the house bed frame or roof structure. Plug the power adapter into a standard electrical outlet. Use the integrated switch or remote control (if included) to turn the lights on/off and adjust settings.
Image description: A close-up view of the LED light string draped along the roof structure of the house bed, illuminating the integrated shelves.
Using the Storage Drawers and Shelves
The two under-bed drawers are on wheels for easy access. Pull them out gently to store items like clothes, toys, or bedding. The wall-side shelves provide open storage for books, decorative items, or small personal belongings. Do not exceed the weight capacity of the drawers or shelves.
Image description: A close-up view of one of the under-bed storage drawers, partially pulled out, showing its interior space.
5. Maintenance
- Cleaning: Wipe the wood surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- LED Lights: Ensure the LED lights are unplugged before cleaning. Wipe gently with a dry cloth. Do not immerse in water.
- Hardware Check: Periodically check all bolts, screws, and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
- Drawer Care: Keep the drawer tracks clean and free of debris to ensure smooth operation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose hardware connections. | Check and tighten all bolts and screws using the provided Allen wrench. |
| LED lights are not turning on. | Power adapter unplugged, faulty connection, or switch off. | Ensure the power adapter is securely plugged into an outlet. Check all connections of the LED strip. Verify the switch is in the "ON" position. |
| Drawers are difficult to open/close. | Obstruction in the track or uneven assembly. | Check for any objects blocking the drawer wheels. Ensure the drawers were assembled correctly and are aligned within the bed frame. |
| Squeaking noises from the bed. | Loose connections or friction between wood parts. | Tighten all hardware. If squeaking persists, apply a small amount of furniture wax or silicone spray to contact points between wood components. |
7. Specifications
- Model: N7090001044
- Brand: Bellemave
- Size: Full
- Color: Natural
- Product Dimensions (L x W x H): 83.4" x 57" x 69.1"
- Material: Pine Wood, MDF
- Special Features: LED Lighting, Storage Drawers, Storage Shelves
- Item Weight: 122 Pounds
- Assembly Required: Yes (Instructions Included)
- Box Spring Required: No
Image description: An overhead view of the Bellemave Full House Platform Bed, illustrating its overall dimensions including length, width, and height, along with drawer dimensions.
8. Warranty and Support
Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the seller directly for details regarding warranty coverage.
For any questions, missing parts, or assistance with assembly or operation, please contact Bellemave customer support or the retailer from whom you purchased the product. Keep your purchase receipt and model number (N7090001044) handy for faster service.
You can visit the Bellemave Store for more information: Bellemave Store
