TEEROK T13 Mini Drone User Manual

Introduction

Thank you for choosing the TEEROK T13 Mini Drone. This compact and feature-rich quadcopter is designed for ease of use, making it ideal for beginners and children. Equipped with a 720P HD camera, headless mode, and multiple flight speeds, the T13 offers an engaging and stable flight experience. Please read this manual thoroughly before operating your drone to ensure safe and optimal performance.

Safety Information

• Always operate the drone in open areas, away from people, animals, and obstacles.
• Do not fly near airports, power lines, or other restricted areas.
• Ensure propellers are clear of obstructions before and during flight.
• Adult supervision is recommended for children operating the drone.
• Do not touch the motors or propellers immediately after flight as they may be hot.
• Avoid flying in strong winds or adverse weather conditions.
• Use only original TEEROK parts and accessories.

Package Contents

The image displays the TEEROK T13 Mini Drone, its remote controller, and three rechargeable batteries. The drone is black with silver accents and features propeller guards. The remote controller is also black with joysticks and various control buttons. The three batteries are shown separately, indicating they are removable and rechargeable.

• TEEROK T13 Mini Drone
• Remote Controller
• Rechargeable Drone Batteries (3 included)
• USB Charging Cable
• Spare Propellers
• Screwdriver
• User Manual

Product Overview

The TEEROK T13 Mini Drone is a compact quadcopter designed for easy handling and stable flight. It features a built-in camera for capturing aerial photos and videos, and its foldable design makes it highly portable. The drone is equipped with propeller guards for enhanced safety and durability.

This image illustrates the TEEROK T13 Mini Drone in flight indoors, highlighting its FPV (First Person View) camera with live transmission capability. The drone is shown hovering, and the text 'FPV KAMERA with Live Transmission' emphasizes this feature. Below, two smaller images depict 'Camera mode' and 'Video mode', suggesting the drone's ability to capture both still images and video footage.

Setup

1. Charging the Drone Batteries

• Connect the USB charging cable to the drone battery.
• Plug the other end of the USB cable into a USB power adapter (5V/1A recommended) or a computer USB port.
• The indicator light on the charging cable will show the charging status. Once fully charged, the light will change or turn off.
• Charging time is approximately 60-90 minutes per battery.

2. Installing Drone Batteries

• Ensure the drone is powered off.
• Carefully insert a charged battery into the battery compartment on the drone's rear until it clicks into place.

3. Installing Remote Controller Batteries

• Open the battery cover on the back of the remote controller.
• Insert 3 AAA batteries (not included) according to the polarity markings.
• Close the battery cover.

4. Propeller Installation (if needed)

• Each propeller is marked with 'A' or 'B'. Match the propeller to the corresponding motor arm.
• Gently push the propeller onto the motor shaft until it is secure.

5. App Download and Connection

• Scan the QR code in the manual or search for the designated app (e.g., 'TEEROK FPV') in your device's app store.
• Install the app on your smartphone.
• Power on the drone.
• Go to your phone's Wi-Fi settings and connect to the drone's Wi-Fi network (usually named 'TEEROK-XXXXXX').
• Open the app to view the live feed and access flight controls.

Operating Instructions

1. Pairing the Remote Controller

• Place the drone on a flat, level surface.
• Power on the drone. The indicator lights will flash.
• Power on the remote controller.
• Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and become solid, indicating successful pairing.

2. Calibration

• After pairing, push both joysticks to the bottom-right corner simultaneously for a few seconds.
• The drone's lights will flash rapidly and then become solid, indicating successful calibration.

3. One Key Start/Landing

This image illustrates three key features of the TEEROK T13 Mini Drone: One Key Start/Landing, Headless Mode, and Altitude Hold. The 'One Key Start/Landing' diagram shows the drone taking off and landing with a single button press. 'Headless Mode' depicts the drone's orientation being independent of its front, making it easier to control. 'Altitude Hold' shows the drone maintaining a stable height automatically.

• Press the One Key Start/Landing button on the remote controller. The drone will automatically take off and hover at a certain altitude.
• Press the same button again to initiate an automatic landing.

4. Basic Flight Controls

• Left Joystick (Throttle/Yaw):
  - Push up/down: Ascend/Descend
  - Push left/right: Rotate left/right (Yaw)
• Right Joystick (Pitch/Roll):
  - Push up/down: Fly forward/backward (Pitch)
  - Push left/right: Fly left/right (Roll)

5. Headless Mode

• Press the Headless Mode button on the remote. The drone will beep to confirm activation.
• In Headless Mode, the drone's forward direction is always relative to the pilot's orientation, regardless of the drone's actual front. This simplifies control for beginners.
• Press the button again to exit Headless Mode.

6. Speed Modes

• The drone has 3 speed modes (low, medium, high).
• Press the Speed button on the remote to cycle through the speeds. The remote will beep to indicate the current speed setting.

7. 3D Flips

This image demonstrates two dynamic features of the TEEROK T13 Mini Drone: 3D Flips and 3 Speed Modes. The top section shows multiple drones in various stages of performing a 3D flip, with a cat observing the action, indicating the drone's agility. The bottom section illustrates the drone's ability to operate at three different speeds, depicted by motion blur effects, with a person and child watching.

• Fly the drone to a height of at least 2 meters.
• Press the 3D Flip button.
• Immediately push the right joystick in any direction (forward, backward, left, or right) to perform a flip in that direction.

8. Camera Operation (720P HD)

• Ensure your smartphone is connected to the drone's Wi-Fi network and the app is open.
• Use the app interface to take photos or record videos. The live feed will be visible on your phone screen.
• Captured media will be saved directly to your smartphone's gallery.

9. Low Battery Auto-Landing

• When the drone's battery is low, the indicator lights will flash, and the drone will automatically begin a slow descent and land.
• This feature helps prevent sudden crashes due to power loss.

Maintenance

1. Cleaning

• Use a soft, dry cloth to clean the drone body and propellers.
• Do not use water or chemical cleaners.

2. Propeller Replacement

• If a propeller is damaged, carefully remove it and replace it with a spare propeller, ensuring the correct 'A' or 'B' marking is matched to the motor.

3. Battery Care

• Store batteries in a cool, dry place.
• Do not overcharge or over-discharge batteries.
• If not used for a long period, charge batteries to about 50% capacity before storing.

Troubleshooting

Specifications

• Brand: TEEROK
• Model: T13-Q20 PRO
• Product Dimensions: 1 x 1 x 1 cm
• Item Weight: 102 g
• Flight Time: Up to 40 minutes (with 3 batteries)
• Camera Resolution: 720P HD
• Special Features: 360 Degree Flip, Auto-Landing, Extended Flight Time, Foldable, Speed Adjustment, Headless Mode, Altitude Hold
• Batteries: 3 AAA batteries required for remote (not included), 3 rechargeable drone batteries (included)

Warranty and Support

Specific warranty information for the TEEROK T13 Mini Drone is not provided in this manual. For warranty claims, technical support, or replacement parts, please contact the seller or manufacturer directly through their official channels. You may find additional support information on the TEEROK Store on Amazon.