Lichaser LED Recessed Lighting Kit

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lichaser LED Recessed Lighting Kit, Model Spider T. This kit is designed to provide warm white (3000K) dimmable lighting for acoustic panels, wood slat walls, cabinets, and other indoor decorative applications.

2. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• This product is designed for indoor use only and is not water-resistant.
• Keep the touch sensor away from metal materials to prevent interference and ensure proper functionality.
• For optimal sensor sensitivity, the partition thickness where the sensor is installed should be ≤ 0.8 inches (2 cm).
• Avoid repeatedly sticking the adhesive backing to maintain its viscosity.
• Do not attempt to modify or repair the product yourself. Contact qualified personnel for assistance.

3. Package Contents

Verify that all components are present in your package:

• 6 x LED Recessed Lighting Strips (various lengths: 2x 36in, 2x 24in, 2x 16in)
• 1 x Touch Sensor
• 1 x Power Supply

This image illustrates the key components for installation: the self-adhesive aluminum light strip, a simple plug-in connector, and the control box for parallel connection of multiple light strips.

4. Specifications

5. Setup and Installation

The Lichaser LED Recessed Lighting Kit features a self-adhesive design for easy, punch-free installation. Follow these steps for setup:

1. Plan Your Layout: Determine the desired arrangement of the 6 LED light strips on your acoustic or wood slat wall panels. The kit includes strips of 16, 24, and 36 inches to accommodate various designs.


An illustration demonstrating the available lengths of the LED light strips (16, 24, and 36 inches) and their dimmable functionality, showing different brightness percentages.

2. Prepare Surfaces: Ensure the installation surface is clean, dry, and free from dust or debris for optimal adhesive performance.
3. Install Light Strips: Carefully peel off the protective backing from each LED light strip and firmly press it into the desired groove or flat surface of your panel. The adhesive is designed for strong adherence.
4. Connect in Parallel: Connect all six light strips to the provided control box using the simple plug-in connectors. The system is designed for parallel connection.
5. Position the Touch Sensor: The touch sensor also comes with adhesive backing. Stick the sensor on a partition (recommended ≤ 0.8 inches / 2 cm thick) in a convenient location. Ensure the sensor is not placed on metal materials to avoid interference.


A close-up view of the touch sensor, highlighting its self-adhesive backing for easy, punch-free installation.

6. Connect Power: Plug the power supply into a standard electrical outlet.

A clear diagram outlining the simple installation process, connecting the touch sensor, power supply, and six LED light strips in parallel.

Installation Demonstration Video:

This video demonstrates the Lichaser LED Recessed Lighting installed on acoustic wall panels, showcasing its aesthetic appeal and how it enhances room ambiance.

6. Operating Instructions

The Lichaser LED Recessed Lighting Kit is controlled via a hidden touch sensor:

• Turn On/Off: Briefly touch the sensor with your hand to turn the lights on or off.
• Adjust Brightness (Dimming): When the lights are on, press and hold the sensor to slowly dim or brighten the light to your desired level. Release the sensor when the desired brightness is achieved.

A visual guide explaining how to operate the hidden touch sensor: short press for on/off, long press to adjust brightness. It also indicates the recommended partition thickness for sensor placement.

7. Maintenance

To ensure the longevity and optimal performance of your LED lighting kit:

• Cleaning: Gently wipe the LED strips and sensor with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Adhesive Care: If repositioning is necessary, be aware that repeated removal and reapplication may reduce the adhesive's effectiveness.
• Electrical Connections: Periodically check all connections to ensure they are secure.

8. Troubleshooting

• Lights Not Turning On:
  • Check if the power supply is securely plugged into an active outlet.
  • Ensure all light strips are correctly connected to the control box.
  • Verify the touch sensor is properly connected and not obstructed.
• Sensor Not Responding or Intermittent:
  • Confirm the sensor is not installed on or near metal materials.
  • Check that the partition thickness where the sensor is located is ≤ 0.8 inches (2 cm).
  • Ensure the sensor surface is clean and dry.
• Lights Not Dimming:
  • Ensure you are pressing and holding the sensor for dimming, not just tapping.

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Lichaser customer service directly. Keep your purchase receipt for warranty claims.