User Manual

1. Introduction

This user manual provides essential information for the safe and effective use of your Kircuit 3-Prong AC Power Cord. This power cord is designed to provide reliable power to compatible devices, ensuring optimal performance and safety. Please read this manual thoroughly before use and retain it for future reference.

This power cord is compatible with devices such as the Monster Rockin' Roller X RRX MNRRX MNRR X Powerful 1000W 15" Subwoofer Indoor/Outdoor Portable Speaker.

2. Product Overview

Figure 2.1: Kircuit 3-Prong AC Power Cord. The image displays the black power cord with a standard 3-prong male plug on one end and a C13 female connector on the other end, designed for connecting to electronic devices.

The Kircuit 3-Prong AC Power Cord is a durable and reliable cable designed for various electronic devices requiring a standard 3-prong power connection. It features a male plug for wall outlets and a female connector (IEC C13) for device input.

Key Features:

• Standard 3-prong design for secure connection.
• Durable construction for long-lasting use.
• Compatible with a wide range of devices requiring a 3-pin AC input.
• Tested and validated for performance and safety.

3. Setup

Setting up the Kircuit 3-Prong AC Power Cord is straightforward. Follow these steps to ensure a proper and safe connection:

1. Identify Compatible Device: Ensure your device requires a 3-prong AC power input (IEC C14 inlet). This cord is specifically designed for such connections.
2. Inspect the Cord: Before connecting, visually inspect the power cord for any signs of damage, such as frayed wires, bent prongs, or cracked insulation. Do not use a damaged cord.
3. Connect to Device: Insert the female end (IEC C13 connector) of the power cord firmly into the power input port of your electronic device. Ensure it is fully seated.
4. Connect to Power Outlet: Insert the male 3-prong plug into a standard, grounded AC power outlet. Ensure the outlet provides the correct voltage (100 Volts AC, as per specifications).
5. Verify Connection: Once both ends are connected, ensure the connections are secure and the device powers on correctly.

Important Safety Note: Always ensure the power outlet is easily accessible to disconnect the power cord if necessary. Do not force the plug into an outlet or device port.

4. Operating Instructions

The Kircuit 3-Prong AC Power Cord operates by transmitting electrical power from a wall outlet to your compatible device. No specific operational steps are required beyond proper connection.

Usage Guidelines:

• Use only with devices that have a compatible 3-pin power input.
• Avoid bending or kinking the cord excessively, as this can damage the internal wiring.
• Do not place heavy objects on the cord.
• Keep the cord away from heat sources, water, and sharp edges.
• Always grasp the plug, not the cord, when disconnecting from an outlet or device.

5. Maintenance

Proper maintenance ensures the longevity and safe operation of your power cord.

Cleaning:

• Disconnect the power cord from both the device and the power outlet before cleaning.
• Wipe the cord with a soft, dry cloth.
• Do not use liquid cleaners, solvents, or abrasive materials.

Storage:

• When not in use, coil the cord loosely. Avoid tight coiling or wrapping around sharp objects.
• Store the cord in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your Kircuit 3-Prong AC Power Cord, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, discontinue use and contact customer support.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage and customer support, please refer to the product packaging or contact the seller directly. The return policy allows for refunds or replacements within 30 days of purchase.

Seller: LGM DYstore