1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SBONNI P107 PRO Round Exhaust Fan. This fan is designed for efficient air extraction and humidity control in various indoor environments such as bathrooms, kitchens, garages, and cellars. It features automatic humidity and temperature detection, a 3-speed fan, and a programmable timer for optimal air quality and energy efficiency.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local wiring regulations.
- Do not install the fan near open flames, heat sources, or in areas with explosive or flammable gases.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Ensure the fan is securely mounted to prevent accidental detachment.
- Do not block the air inlet or outlet during operation.
3. Product Overview and Features
The SBONNI P107 PRO exhaust fan integrates advanced features for superior ventilation and environmental control.
Key Features:
- Automatic Operation: Detects humidity and temperature changes to activate/deactivate autonomously.
- Real-time Display: Integrated screen shows current temperature and humidity.
- External Sensor: Provides accurate readings by measuring ambient air directly, unaffected by motor heat.
- 3-Speed Settings: Adjustable fan speeds (Low, Medium, High) for various ventilation needs.
- Programmable Timer: Set the fan to run for up to 9 hours before automatic shutdown.
- 24-Hour Mode: Optional continuous operation regardless of environmental conditions.
- Easy Adjustment: Control panel allows parameter changes without disassembling the unit.
- Quiet Operation: Enhanced copper motor and double ball bearings ensure low noise levels.
Image: Overview of the SBONNI P107 PRO exhaust fan's control panel, highlighting its humidity sensor control, temperature sensor control, timer, 24-hour ON mode, and OFF mode. It also contrasts with a traditional fan lacking these features.
Image: Illustration of the three fan speed settings (Low, Medium, High) with corresponding airflow rates (95 m³/h, 120 m³/h, 145 m³/h) for the SBONNI P107 PRO exhaust fan.
4. Setup and Installation
The SBONNI P107 PRO exhaust fan is designed for straightforward installation in a 100mm opening.
Components Included:
- Exhaust Fan Unit with LCD Display
- Control Box with External Sensor (7cm cable)
- Mounting Plate (15cm x 15cm)
- Screws and Wall Plugs
- Instruction Manual
Image: Contents of the SBONNI P107 PRO exhaust fan package, including the fan unit, control box, external sensor, mounting hardware, and manual.
Installation Steps:
- Prepare the Opening: Ensure you have a 100mm diameter opening in the ceiling, wall, or window where the fan will be installed.
- Open the Panel: Gently open the front panel of the fan unit.
- Install the Base: Position the fan's base into the 100mm opening. Secure it using the provided screws and wall plugs, or suitable adhesive.
- Connect the Sensor: Plug the external sensor cable into the designated port on the control box. Position the external sensor in an area where it can accurately measure ambient humidity and temperature, away from direct airflow from the fan or other heat sources.
- Replace the Cover: Reattach the front panel securely to the fan unit.
- Connect Power: Plug the fan's power cable into a suitable electrical outlet.
Image: Step-by-step visual guide for installing the SBONNI P107 PRO exhaust fan, showing how to open the panel, install the base, replace the cover, and connect power.
5. Operating Instructions
The SBONNI P107 PRO offers flexible operating modes and settings via its integrated control panel.
Control Panel Overview:
The control panel features an LCD display showing real-time humidity and temperature, along with buttons for mode selection and adjustments.
Image: Detailed view of the SBONNI P107 PRO control panel, illustrating the display for humidity and temperature, and indicators for ON/OFF, timer, and 24-hour operation.
Operating Modes:
- Automatic Mode: The fan automatically turns ON or OFF based on detected humidity and temperature levels. This is the default and most energy-efficient mode.
- 24-Hour Mode (ON): In this mode, the fan operates continuously, 24 hours a day, regardless of humidity or temperature. Activate this for constant air circulation.
- Manual OFF Mode: The fan can be manually turned OFF.
Adjusting Settings:
- Fan Speed: Use the control panel buttons to cycle through the 3 fan speeds (Low, Medium, High) to adjust airflow as needed.
- Timer: Set the timer for up to 9 hours. The fan will operate for the set duration and then automatically shut off. This setting must be manually adjusted for each use.
- Humidity/Temperature Thresholds: The automatic mode can be configured to specific humidity and temperature thresholds. Refer to the detailed instruction manual for precise adjustment steps.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your SBONNI P107 PRO exhaust fan.
Cleaning:
- Exterior: Wipe the exterior of the fan and control panel with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Fan Blades: Periodically, disconnect power and carefully remove the front panel to access and clean the fan blades. Use a soft brush or cloth to remove dust and debris. Ensure blades are dry before reassembling.
External Sensor:
The external sensor is designed for easy replacement. If you suspect inaccurate readings or damage, the sensor can be individually replaced without needing to replace the entire unit. Contact customer support for replacement parts.
Image: Illustration highlighting the benefits of the SBONNI P107 PRO's external sensor, including easy replacement, direct environmental contact for accuracy, and IPX4 water resistance.
7. Troubleshooting
If you encounter issues with your SBONNI P107 PRO exhaust fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Loose connection. | Check if the power cable is securely plugged in. Verify the power outlet is functional. Ensure all internal connections are secure. |
| Incorrect humidity/temperature readings. | External sensor improperly placed or damaged. | Ensure the external sensor is positioned away from direct airflow or heat sources. If damaged, replace the external sensor. |
| Reduced airflow or unusual noise. | Fan blades or grille obstructed by dust/debris. | Disconnect power and clean the fan blades and grille as described in the Maintenance section. |
| Automatic mode not functioning. | Humidity/temperature thresholds not met. Sensor issue. | Verify the current humidity/temperature against the set thresholds. Check the external sensor for proper function. |
8. Specifications
Detailed technical specifications for the SBONNI P107 PRO Round Exhaust Fan.
| Specification | Value |
|---|---|
| Brand | SBONNI |
| Model Name | P107 |
| Color | Blanc (White) |
| Design | Round Exhaust Fan |
| Power Source | Corded Electric |
| Dimensions (L x W x H) | 15.5P x 15.5l x 12.5H cm |
| Recommended Room Type | Bedroom, Kitchen, Garage, Bathroom, Laundry Room |
| Mounting Type | Ceiling Mount, Wall Mount, Window Mount |
| Control Device Type | Control Box |
| Number of Speeds | 3 |
| Noise Level | 24 Decibels |
| Power Consumption | 12 Watts |
| Number of Blades | 7 |
| Airflow | 145 Cubic Meters per Hour |
| Speed | 2600 RPM |
| Voltage | 230 Volts |
| Switch Type | Automatic Sensor Control / Manual Control via Control Box |
| Usage | Indoor |
| Control Method | Push Button |
| Wireless | No |
| Motor Type | Brushless Motor |
| Certifications | CE, RoHS |
| Material | Acrylonitrile Butadiene Styrene, Polycarbonate |
Image: Technical drawing showing the dimensions of the SBONNI P107 PRO exhaust fan, including the fan diameter (105mm), overall width (155mm), depth (90mm), control box dimensions, and cable length.
9. Warranty and Support
SBONNI is committed to providing high-quality products and excellent customer service.
Warranty Information:
- Manufacturer Warranty: Your SBONNI P107 PRO exhaust fan comes with a 3-year manufacturer warranty.
- Returns: Enjoy 30-day express returns for your convenience.
Customer Support:
For any questions, issues, or warranty claims regarding your product, please contact our customer service team. We are available to assist you at any time.
Image: Representation of the SBONNI customer service team, emphasizing 24/7 service, 30-day express returns, and a 24-month warranty.
Certifications:
The SBONNI P107 PRO exhaust fan holds European patents and is certified with CE and RoHS, ensuring compliance with safety and environmental standards.
Image: Display of official product certification documents, including CE and RoHS symbols, confirming compliance with European standards.