FAVSH Day bed

FAVSH Twin Size Daybed with Trundle and Storage Drawers

Model: Day bed

Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

  • Ensure all parts are present and undamaged before beginning assembly.
  • Assemble the daybed on a soft, clean surface to prevent scratches.
  • Do not overtighten screws during assembly to avoid damaging the wood.
  • Regularly check all connections to ensure they remain tight and secure.
  • This daybed is designed for a maximum weight capacity of 250 lbs. Do not exceed this limit.
  • Keep small parts away from children during assembly to prevent choking hazards.
  • Only use mattresses with a thickness of 6 inches or less for optimal safety and fit.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

  • Daybed Frame (Headboard, Footboard, Side Rails)
  • Slats (10 pieces)
  • 2 Storage Drawers
  • Hardware Pack (screws, bolts, Allen wrench)
  • Assembly Manual
FAVSH Twin Size Daybed frame components

Image: Overview of the daybed frame components, including side rails and headboard/footboard sections, ready for assembly.

Setup and Assembly

Assembly is required. Please follow these steps carefully. It is recommended to have two people for assembly.

  1. Unpack and Identify Parts: Lay out all components and hardware on a clean, soft surface. Refer to the parts list to ensure everything is present.
  2. Attach Side Rails to Headboard/Footboard: Connect the side rails to the headboard and footboard using the provided bolts and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
  3. Install Slats: Place the wooden slats across the side rails. Secure them in place according to the instructions in the included manual. Ensure even spacing for proper mattress support.
  4. Assemble Storage Drawers: Follow the separate instructions for assembling the two storage drawers. Attach the wheels to the bottom of each drawer.
  5. Final Tightening: Once the main frame is assembled and stable, go back and fully tighten all bolts and screws.
  6. Insert Drawers: Slide the assembled storage drawers under the daybed frame.
Close-up of daybed frame connection

Image: Close-up view of a secure connection point on the daybed frame, illustrating how components fit together.

Operating Instructions

The FAVSH Daybed is designed for versatile use as both a bed and a sofa, with integrated storage.

  • Using as a Bed: Place a twin-size mattress (6 inches or less in thickness) directly onto the slats. No box spring is needed.
  • Using as a Sofa: Arrange pillows and cushions against the back and side panels to convert the daybed into a comfortable seating area.
  • Accessing Storage Drawers: The two hideaway drawers are located beneath the bed frame. Simply pull them out from the front to access your stored items. Push them back in when not in use to keep the room tidy.
FAVSH Twin Size Daybed with one storage drawer open

Image: The grey twin daybed with one of its two under-bed storage drawers partially open, revealing ample space for items.

Close-up of daybed storage drawer wheel

Image: Close-up view of the bottom corner of a storage drawer, showing the smooth-rolling caster wheel for easy movement.

Maintenance

Proper care will extend the life and appearance of your daybed.

  • Cleaning: Wipe the wooden surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
  • Dusting: Regularly dust the daybed with a dry, soft cloth.
  • Hardware Check: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or cracking of the wood finish.

Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Daybed feels wobblyLoose hardware connectionsCheck and tighten all bolts and screws.
Drawers do not slide smoothlyObstruction under the bed or damaged wheelsClear any debris from under the bed. Inspect drawer wheels for damage; replace if necessary.
Squeaking noisesLoose connections or friction between partsTighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to friction points if needed.

Specifications

  • Product Type: Daybed with Drawers
  • Size: Twin
  • Color: Grey
  • Material: Pine wood, Plywood, MDF, PB
  • Number of Slats: 10 pcs
  • Spring Box: Not needed
  • Assembly Required: Yes
  • Overall Product Dimension: 78.3"L x 42.3"W x 35.4"H
  • Overall Product Weight: 89.3 lbs
  • Bed Weight Capacity: 250 lbs
  • Suggested Mattress Thickness: 6 inches or less
  • Manufacturer: FAVSH
  • UPC: 045791439202
FAVSH Twin Size Daybed dimensions diagram

Image: Detailed diagram showing the dimensions of the twin daybed in inches, including length, width, height, and drawer dimensions.

Warranty and Support

FAVSH is committed to providing quality products. For specific warranty details, please refer to the documentation included with your purchase or contact FAVSH customer support directly.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact FAVSH customer service through the retailer where the product was purchased or visit the official FAVSH store page for contact information.

Online Support: Visit the FAVSH Store on Amazon

© 2025 FAVSH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.