Introduction
This manual provides comprehensive instructions for the Ayybboo Kids Digital Sport Watch Model 2207. Please read this guide carefully to understand the watch's features, setup procedures, and maintenance recommendations. This watch is designed for children, featuring a durable construction, 30M water resistance, and a fun 7-color LED backlight.
Product Overview
Familiarize yourself with the watch's components and button functions.
Image 1: Watch Components and Button Functions. This diagram illustrates the location and labels of the four control buttons (Light, Mode, Start, Reset) and the digital display segments for hour, minute, second, and day of the week.
- Light Button (Top Left): Activates the LED backlight. Hold for 3 seconds to change backlight color.
- Mode Button (Bottom Left): Cycles through display modes: Time, Alarm, Stopwatch.
- Start Button (Top Right): Used to start/stop stopwatch, adjust settings, or view date.
- Reset Button (Bottom Right): Used to reset stopwatch, confirm settings, or switch 12/24H mode.
Image 2: Watch Construction Details. This image shows the watch's durable features, including the HD glass display, stainless steel back for water resistance, a soft and flexible TPU strap, and a secure stainless steel buckle.
Setup Instructions
Setting Time and Date:
- From the normal time display, press the Mode Button three times to enter time setting mode. The seconds will flash.
- Press the Reset Button to set seconds to zero.
- Press the Start Button to move to the next setting (Hour).
- Press the Reset Button to adjust the flashing hour.
- Repeat steps 3 and 4 for Minute, Month, Date, and Day of the Week.
- Once all settings are adjusted, press the Mode Button to exit setting mode and return to the normal time display.
12/24 Hour Format:
In the normal time display, press the Reset Button to toggle between 12-hour and 24-hour formats.
Operating Functions
LED Backlight:
Press the Light Button (top left) to illuminate the display. The backlight will stay on for a few seconds.
Image 3: 7-Color LED Backlight Feature. This image demonstrates the watch's ability to display time with various backlight colors. It shows the normal display and an illuminated display, along with examples of the seven available LED colors.
To change the backlight color, press and hold the Light Button for approximately 3 seconds. The color will cycle through the available 7 colors. Release the button when your desired color is displayed.
Alarm Function:
- From the normal time display, press the Mode Button once to enter Alarm mode.
- Press the Start Button to select the hour to set.
- Press the Reset Button to adjust the flashing hour.
- Press the Start Button to select the minute to set.
- Press the Reset Button to adjust the flashing minute.
- Press the Mode Button to exit Alarm setting mode.
- To turn the alarm ON/OFF, in Alarm mode, press the Start Button to toggle the alarm symbol.
Stopwatch Function:
- From the normal time display, press the Mode Button twice to enter Stopwatch mode. The display will show "00:00:00".
- Press the Start Button to begin timing.
- Press the Start Button again to pause timing.
- To resume, press the Start Button.
- To reset the stopwatch to zero, press the Reset Button while the stopwatch is paused.
- Press the Mode Button to exit Stopwatch mode.
Maintenance
Water Resistance (30M):
This watch is water-resistant up to 30 meters (3 ATM), making it suitable for daily use, splashes, rain, and hand washing. Important: Do not press any buttons while the watch is submerged in water. This can compromise the water resistance seal.
Cleaning:
To clean your watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or strap.
Battery:
The watch uses a standard watch battery. Battery replacement should be performed by a qualified technician to ensure the water resistance seal is maintained.
Troubleshooting
- Display is blank or dim: The battery may be low. Consider replacing the battery.
- Time is incorrect: Follow the "Setting Time and Date" instructions to reset the time.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though this model does not specify one). If issues persist, a battery reset (removing and reinserting the battery) might be necessary, but this should be done by a professional.
- Water inside the watch: If water appears inside the watch, stop using it immediately and take it to a professional for inspection and repair to prevent further damage.
Specifications
Image 4: Product Dimensions. This diagram provides detailed measurements for the watch case (thickness and diameter) and strap (width and length), along with the minimum and maximum wrist circumference it can fit.
| Feature | Detail |
|---|---|
| Model Number | 2207 |
| Display Type | Digital |
| Movement Type | Japanese Automatic |
| Water Resistance Depth | 30 Meters (3 ATM) |
| Case Material | Resin |
| Band Material Type | Thermoplastic Polyurethane (TPU) |
| Dial Window Material Type | Resin |
| Case Diameter | 3.6 Centimeters (1.41 inches) |
| Case Thickness | 1.0 Centimeters (0.39 inches) |
| Band Width | 1.6 Centimeters (0.63 inches) |
| Band Length | 24 Centimeters (9.44 inches) |
| Item Weight | 20 Grams |
| Special Features | 7-Color LED Backlight, Alarm, Stopwatch, Date Display, 12/24H Mode, Lightweight |
Warranty and Support
This product comes with an extended warranty. For specific warranty details and claims, please refer to the documentation provided at the time of purchase or contact Ayybboo customer support.
A video instruction manual is included with the product to assist with initial setup and understanding of features. If you require further assistance, please contact the seller or manufacturer.