onerbl AC-DC Adapter

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Onerbl AC-DC Adapter User Manual

For Onsju 18H E22 E8-2 18 Egg Incubator

1. Introduction

This manual provides essential information for the safe and effective use of your Onerbl AC-DC Adapter. This power supply is designed to provide 12V DC power to compatible devices, specifically the Onsju 18H E22 E8-2 18 Egg Incubator. It converts standard AC electrical power from an outlet into the direct current required by your device.

Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

To prevent injury or damage to the product, observe the following safety precautions:

  • Ensure the adapter's voltage and current ratings match the requirements of your device. This adapter is specifically designed for 12VDC devices.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Keep the adapter away from children.
  • Ensure proper ventilation around the adapter during operation to prevent overheating.
  • This adapter features over-voltage and short-circuit protection for enhanced safety.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Onerbl AC-DC Adapter (Power Brick)
  • 1 x AC Power Cord (for connecting to wall outlet)
Onerbl AC-DC Adapter and Power Cord

Figure 3.1: The Onerbl AC-DC Adapter unit with its detachable AC power cord. The adapter features a barrel connector output and an input for the AC power cord.

4. Setup Instructions

Follow these steps to connect your AC-DC adapter:

  1. Connect the AC Power Cord: Insert the two-prong end of the AC power cord into the corresponding receptacle on the Onerbl AC-DC Adapter unit. Ensure it is firmly seated.
  2. Connect to Device: Insert the barrel connector from the adapter's output cable into the power input port of your Onsju 18H E22 E8-2 18 Egg Incubator.
  3. Connect to Power Outlet: Plug the two-prong plug of the AC power cord into a standard 110V AC electrical wall outlet.
  4. The indicator light on the adapter should illuminate, signifying that power is being supplied.
AC-DC Adapter connected to a wall outlet and device

Figure 4.1: The Onerbl AC-DC Adapter connected to a wall outlet and ready to power a device. The blue indicator light on the adapter is visible.

5. Operating Instructions

Once properly connected as described in the Setup section, the Onerbl AC-DC Adapter will continuously supply 12V DC power to your connected device. There are no user-adjustable settings on the adapter itself.

  • Ensure the adapter is placed on a stable, flat surface with adequate ventilation.
  • Monitor the indicator light on the adapter to confirm it is receiving power.
  • Refer to your Onsju 18H E22 E8-2 18 Egg Incubator's manual for specific operating instructions for the incubator itself.

6. Maintenance

Proper maintenance ensures the longevity and reliable operation of your adapter:

  • Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cables to prevent damage.
  • Inspection: Periodically inspect the cables and connectors for any signs of wear, fraying, or damage. If any damage is observed, discontinue use and replace the adapter.

7. Troubleshooting

If you encounter issues with your Onerbl AC-DC Adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power to device / Adapter indicator light is off.
  • Loose connection.
  • Faulty power outlet.
  • Damaged adapter or cable.
  • Ensure all connections (AC cord to adapter, adapter to device, AC plug to wall) are secure.
  • Test the power outlet with another device.
  • Inspect the adapter and cables for visible damage. If damaged, replace the unit.
Device not functioning correctly.
  • Incorrect adapter used.
  • Device malfunction.
  • Verify the adapter is the correct model for your Onsju 18H E22 E8-2 18 Egg Incubator.
  • Consult the incubator's manual for troubleshooting specific to the device.

8. Specifications

Technical details for the Onerbl AC-DC Adapter:

  • Brand: onerbl
  • Input Voltage: 110 Volts (AC)
  • Output Voltage: 12 Volts (DC) (Inferred from product title "12VDC Power Supply")
  • Connector Type: Barrel Connector
  • Special Feature: Short Circuit Protection, Over Voltage Protection, Over Heat Protection
  • Color: Black
  • Power Source: Corded Electric
  • Compatible Devices: Onsju 18H E22 E8-2 18 Egg Incubator
Dimensions of the AC-DC Adapter and cables

Figure 8.1: Diagram illustrating the dimensions of the Onerbl AC-DC Adapter and its associated cables. The total cable length is approximately 127.8 inches.

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer, Onerbl. Keep your purchase receipt as proof of purchase.

Manufacturer: Shenzhen Waweis Technology Co., Ltd

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.