Introduction
This manual provides essential information for the safe and effective use of your onerbl AC-DC Adapter. This power supply is designed to convert AC power from an electrical outlet into the DC power required by compatible devices, specifically the Dream Z30 VZV17A cordless vacuum cleaner.
The adapter is manufactured with high-quality materials and tested to ensure it meets the power requirements of your device, providing a reliable charging and operating solution.
Important Safety Instructions
- Indoor Use Only: This adapter is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Voltage: Ensure the input voltage (100-240V AC) matches your electrical outlet.
- Avoid Overload: Do not overload the power outlet.
- Cable Care: Do not place heavy objects on the power cord. Avoid bending, twisting, or pulling the cord excessively.
- Disconnect When Not in Use: Unplug the adapter from the power outlet when not in use for extended periods.
- No Disassembly: Do not attempt to open or repair the adapter. Refer all servicing to qualified personnel.
- Compatibility: Use this adapter only with compatible devices as specified in this manual. Using an incompatible adapter may damage your device.
- Battery Condition: Rechargeable batteries have a limited lifespan (typically 1 to 3 years). If your device's battery is old or faulty, it may not accept a charge, which is not an issue with the charger itself.
Setup
- Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Locate the charging port on your Dream Z30 VZV17A cordless vacuum cleaner. Insert the barrel connector of the onerbl AC-DC adapter firmly into the charging port.
- Connect to Power Outlet: Plug the AC plug of the adapter into a standard 100-240V AC electrical wall outlet.
Operating Instructions
Once the adapter is properly connected to both the device and a power outlet, it will begin to supply power or charge the device's battery. The charging indicator on your Dream Z30 vacuum cleaner (if available) will typically illuminate to show that charging is in progress.
- Charging: Allow sufficient time for the device's battery to fully charge. Refer to your vacuum cleaner's manual for specific charging times.
- Powering: The adapter can also power the vacuum cleaner directly if the battery is removed or fully charged, depending on the vacuum's design.
- Disconnecting: To disconnect, first unplug the adapter from the wall outlet, then disconnect the barrel connector from your device.
Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the adapter. Do not use liquid cleaners or sprays.
- Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage.
- Regular Inspection: Periodically check the adapter and cable for any signs of wear, cuts, or damage. Replace the adapter if any damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging/powering. |
|
|
| Adapter feels excessively hot during use. |
|
|
Specifications
General
- Brand: onerbl
- Model: TPQ-88E340090VW01 (Compatible with ZD024M340090US)
- Color: Black
- Connector Type: Barrel Connector
- Special Feature: Short Circuit Protection
- Included Components: 1 AC-DC Adapter
Electrical
- Input Voltage: 100-240V AC, 50/60Hz
- Output Voltage: 34V DC
- Output Current: 0.9A (900mA)
- Output Wattage: 30.6W
- Compatible Device Battery Voltage: 29.6V DC (e.g., Dream Z30 VZV17A)
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt for warranty claims.
Manufacturer: Shenzhen Waweis Technology Co., Ltd