Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your Keurig K-Supreme Single Serve Coffee Maker. The K-Supreme features MultiStream Technology, designed to evenly saturate coffee grounds for enhanced flavor and aroma. It offers multiple brew sizes and customizable options for a personalized coffee experience.
Setup
1. Unboxing and Placement
Carefully remove all packaging materials from the coffee maker. Place the brewer on a clean, flat, and stable surface. The 66 oz. dual-position water reservoir can be positioned on either the side or the back of the brewer to optimize counter space.
Image: The Keurig K-Supreme coffee maker demonstrating its dual-position water reservoir, which can be placed on the side or back of the unit to fit various counter layouts.
2. Initial Rinse Cycle
Before brewing your first cup, perform an initial rinse cycle. Fill the water reservoir with fresh water. Place a large mug on the drip tray. Lift and lower the brewer handle without inserting a K-Cup pod. Select a brew size (e.g., 8 oz) and press the brew button. Discard the hot water. This cleans the internal components.
Operating Instructions
1. Brewing a K-Cup Pod
- Ensure the water reservoir is filled with fresh water.
- Place a mug on the drip tray. For travel mugs up to 7 inches tall, remove the drip tray.
- Lift the brewer handle and insert a K-Cup pod into the pod holder.
- Lower the handle completely to close the lid.
- Select your desired brew size (6, 8, 10, or 12 oz) using the illuminated buttons.
- Optionally, select the Strong button for a more intense coffee or the Over Ice button for iced coffee.
- Press the illuminated K button to begin brewing. The brewer will dispense coffee into your mug.
- After brewing, lift the handle to eject the used K-Cup pod.
Image: A hand demonstrates inserting a K-Cup pod into the Keurig K-Supreme brewer, ready for brewing.
Image: Detailed view of the control panel, highlighting the brew size selections (6, 8, 10, 12 oz) and the 'Strong' and 'Over Ice' buttons.
2. MultiStream Technology
The K-Supreme utilizes MultiStream Technology, which employs multiple streams of water to more evenly saturate the coffee grounds within the K-Cup pod. This process extracts a fuller flavor and aroma from your coffee.
Image: A close-up view illustrating the MultiStream Technology, where multiple water jets are visible above the K-Cup pod holder.
3. Brewing Hot Water
To dispense hot water, simply lift and lower the brewer handle without inserting a K-Cup pod. Select your desired brew size and press the brew button.
Maintenance
1. Cleaning the Drip Tray
The drip tray collects overflow and spills. It is removable for easy cleaning. Simply slide it out, empty any liquid, and wash with warm, soapy water. Rinse thoroughly and dry before replacing.
Image: The removable water reservoir being detached from the Keurig K-Supreme, illustrating the ease of refilling and cleaning.
2. Descaling
The brewer features a MAINTENANCE ALERT that reminds you to descale after every 250 brews. Descaling removes mineral buildup that can affect brewer performance and coffee taste. Refer to the full descaling instructions provided with your brewer or on the Keurig website.
3. Water Filter Cartridge
For optimal taste, it is recommended to use a Keurig water filter cartridge in the reservoir. Replace the cartridge approximately every two months or 60 tank refills. Follow the instructions provided with the water filter cartridges for installation and replacement.
Troubleshooting
If your Keurig K-Supreme coffee maker is not functioning as expected, consider the following common issues:
- No Power: Ensure the brewer is securely plugged into a grounded outlet.
- No Water Dispensed: Check if the water reservoir is filled above the minimum fill line. Ensure the reservoir is properly seated.
- Weak Brew: Verify that the K-Cup pod is correctly inserted and the brewer handle is fully lowered. Consider using the 'Strong' brew option.
- "Add Water" Light On: Refill the water reservoir.
- "Descale" Light On: Perform a descaling cycle as indicated in the Maintenance section.
For further assistance, please refer to the full troubleshooting guide on the official Keurig website or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Keurig |
| Model Name | K-Supreme (KSK910BK) |
| Color | Black |
| Product Dimensions | 12.02"D x 7.85"W x 12.15"H |
| Water Reservoir Capacity | 66 oz. (Dual-Position Removable) |
| Brew Sizes | 6, 8, 10, or 12 oz. |
| Special Features | MultiStream Technology, Strong Brew, Brew Over Ice, Automatic Shut-Off, Removable Water Reservoir, Fits Travel Mug |
| Coffee Input Type | K-Cup Pod |
| Voltage | 120 Volts |
| Item Weight | 5.78 pounds |
Image: A diagram detailing the product dimensions of the Keurig K-Supreme, showing measurements for both side and rear reservoir placements.
Warranty and Support
For detailed warranty information, please refer to the documentation included with your Keurig K-Supreme coffee maker. You can also visit the official Keurig website for product registration, FAQs, and customer support contact details.
Online Support: www.keurig.com/support
