Introduction
This manual provides comprehensive instructions for the ALLIMITY Remote Control, designed for use with a range of Grandin TV models. This remote offers full functionality without the need for programming or complex setup, ensuring a seamless replacement for your original remote control.
Please refer to the compatible models list to ensure this remote is suitable for your television.
Setup
1. Battery Installation
The ALLIMITY Remote Control requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, pushing it until it clicks securely into place.

Image: Back view of the remote control with the battery compartment visible. This is where you will insert the AAA batteries.
2. Initial Use
No programming or pairing is required. Once batteries are installed, the remote control is ready for immediate use with compatible Grandin TV models.
Operating Instructions
The ALLIMITY Remote Control is designed to replicate the functions of your original Grandin TV remote. Below is a general overview of common button functions.

Image: Front view of the ALLIMITY remote control, displaying all buttons and their general layout. Dimensions are also shown: 18 cm (7.09 in) length and 5 cm (1.97 in) width.
- POWER: Turns the TV on or off.
- INFO: Displays on-screen information about the current program.
- MUTE: Mutes or unmutes the TV audio.
- Number Buttons (0-9): Directly select TV channels.
- SOURCE: Selects input sources (e.g., HDMI, AV).
- AUDIO: Adjusts audio settings or selects audio tracks.
- MENU: Accesses the TV's main menu.
- EXIT: Exits the current menu or function.
- Navigation Pad (Up, Down, Left, Right, ENTER): Navigates through menus and confirms selections.
- VOL+/-: Adjusts the volume level.
- CH+/-: Changes TV channels.
- REPEAT, MENU, SETUP, TITLE: Specific function buttons, refer to your TV's manual for exact usage.
- Colored Buttons (Red, Green, Yellow, Blue): Often used for teletext, interactive services, or specific menu functions.
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Skip): For media playback functions, if supported by your TV.
- PROG: Accesses program guide or list.
- DMP: Digital Media Player access.
- RADIO: Switches to radio mode if available.
For detailed information on specific functions, please consult your Grandin TV's original user manual.
Maintenance
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the remote's surface and buttons.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Remove batteries if the remote will not be used for an extended period to prevent leakage.
Storage
Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Confirm the remote is pointed directly at the TV's sensor.
- Some buttons not working:
- This remote is designed to be fully functional. If specific buttons do not work, ensure your TV model is listed as compatible.
- Clean the remote control, as dirt or debris might be interfering with button contacts.
- Short transmission distance:
- Replace batteries with fresh ones.
- Ensure no strong light sources (like direct sunlight) are interfering with the infrared signal.
Specifications
| Brand | ALLIMITY |
| Model Number | 42PCH211-E19CE366EB |
| Connectivity Technology | Infrared |
| Power Source | 2 x AAA Batteries (not included) |
| Number of Buttons | 25 |
| Maximum Range | 10 Meters |
| Product Dimensions | 17 x 5 x 1 cm (approximately) |
| Item Weight | 59 Grams |
| Special Features | Ergonomic design |
Compatible Grandin TV Models
This ALLIMITY remote control is compatible with the following Grandin TV models:
- 42PCH211
- E19CE366EB
- L32CH11
- LCH2411TH
- LD19C12
- LD19C868CI
- LD19CHD106
- LD19CHG1060ES
- LD22CHD106CI
- LD28CG60
- LD28CHG2200E
Please verify your TV's model number, typically found on a label on the back of your television, to ensure compatibility.
Support
For further assistance or inquiries regarding your ALLIMITY Remote Control, please contact your retailer or refer to the support information provided with your original purchase.
