Kismile Water Cooler Dispenser with Ice Maker (Model WD5815-1) Instruction Manual

1. Introduction

Thank you for choosing the Kismile Water Cooler Dispenser with Ice Maker. This multi-functional appliance is designed to provide convenient access to hot, cold, and freshly made ice, making it ideal for various settings including homes and offices. Its integrated design saves space by combining three essential functions into one compact unit.

2. Safety Information

Please read all safety instructions carefully before operating the appliance. Keep this manual for future reference.

• Ensure the appliance is placed on a stable, level surface.
• Do not operate the appliance with a damaged power cord or plug.
• Keep the appliance away from direct sunlight and heat sources.
• Child Safety Lock: The hot water dispenser is equipped with a child safety lock to prevent accidental scalding. Always engage the child lock when not in use, especially in households with children.

3. Setup

1. Unpacking: Carefully remove the dispenser from its packaging. Inspect for any damage.
2. Placement: Position the dispenser on a firm, level surface, ensuring adequate ventilation around the unit. Avoid placing it near direct heat or in direct sunlight.
3. Water Bottle Installation: This dispenser uses a top-loading system. Place a 3 or 5-gallon water bottle onto the top reservoir. Ensure the bottle is securely seated and the puncturable seal is properly engaged to track water levels.
4. Power Connection: Plug the power cord into a grounded electrical outlet.
5. Initial Flush: Before first use, dispense and discard several cups of water from both hot and cold spouts to flush the system.

4. Operating Instructions

The Kismile Water Cooler Dispenser features an intelligent control panel with touch and mechanical buttons for intuitive operation.

4.1 Control Panel Overview

• Cold Water Dispense: Press the 'Cold Water Dispense' button to get chilled water.
• Hot Water Dispense: Press the 'Hot Water Dispense' button for hot water. Remember to disengage the child lock first.
• Child Lock: Activate or deactivate the child lock for the hot water dispenser by pressing the 'Child Lock' button.
• Power: Indicates if the unit is powered on.
• Add Water: Illuminates when the water bottle needs refilling.
• Heating/Cooling/Ice-Making: Use the mechanical buttons to activate or deactivate these functions as needed.

4.2 Ice Making

The dispenser can produce up to 33 pounds of ice in 24 hours, with 9 bullet-shaped ice cubes ready in approximately 6-11 minutes. It has a 2.5L ice storage capacity.

1. Ensure the 'Ice-Making' button is activated on the control panel.
2. The unit will automatically begin producing ice.
3. Once the ice storage is full, the ice maker will automatically stop.
4. Use the provided scoop to retrieve ice from the ice compartment.

4.3 Water Dispensing

1. Place your cup on the drip tray.
2. For cold water, press the 'Cold Water Dispense' button.
3. For hot water, first disengage the child lock, then press the 'Hot Water Dispense' button.

5. Maintenance

• Cleaning the Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners.
• Drip Tray: Regularly remove and empty the drip tray to prevent overflow and maintain hygiene. The drip tray is removable for easy cleaning.
• Internal Cleaning: Periodically clean the water reservoirs according to the detailed instructions in the full user manual (not provided in this summary).

6. Troubleshooting

• No Water Dispensing: Check if the water bottle is empty. The 'Add Water' indicator will light up if the bottle needs replacement. Ensure the bottle is correctly installed.
• No Ice Production: Verify that the 'Ice-Making' function is activated. Check if the water reservoir has sufficient water. The ice maker automatically stops when the ice storage is full.
• Hot Water Not Dispensing: Ensure the child safety lock is disengaged.
• Water Not Hot/Cold Enough: Allow sufficient time for the heating/cooling elements to reach the desired temperature after activation.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Kismile customer service directly. Contact details can typically be found on the manufacturer's website or in the packaging materials.