Fisher & Paykel 836524 Small Bin Instruction Manual

1. Product Overview

The Fisher & Paykel 836524 Small Bin is a replacement or supplementary storage component designed for specific Fisher & Paykel refrigerators. This bin is suitable for models where the freezer is located at the bottom and the bins are designed to sit on a roll-out tray. It is identified as the larger of two bin sizes available for these refrigerator types.

This bin specifically suits Fisher & Paykel refrigerator model E522B.

An image showing the transparent Fisher & Paykel 836524 Small Bin. The bin features a clear plastic construction, a ribbed base for drainage or air circulation, and a slight cut-out on one side, likely for easier handling or fitting into a specific refrigerator slot. Its approximate dimensions are 15.5 x 13.5 x 7.5 inches.

2. Setup and Installation

The 836524 bin is designed for easy installation into compatible Fisher & Paykel refrigerators. It functions as both a fridge bin and a freezer bin, depending on the specific compartment it is placed in.

1. Identify Location: Locate the designated roll-out tray within your refrigerator or freezer compartment where the bin is to be placed.
2. Insert Bin: Gently slide the 836524 bin onto the roll-out tray. Ensure it is seated securely and slides smoothly along the tray's runners.
3. Verify Fit: Confirm that the bin does not obstruct the closing of the refrigerator or freezer door and that it sits level.

3. Operating Instructions

The bin is intended for storing food items within your refrigerator or freezer. To ensure optimal performance and longevity:

• Placement: Place food items securely within the bin to prevent spillage or damage.
• Loading: Avoid overloading the bin. Overloading can hinder proper air circulation and make it difficult to move the bin on its roll-out tray.
• Temperature: Ensure items placed in the bin are suitable for the temperature of the compartment (refrigerator or freezer).

4. Maintenance and Care

Regular cleaning will help maintain the hygiene and appearance of your bin.

1. Removal: Carefully remove the bin from the refrigerator or freezer compartment.
2. Cleaning: Wash the bin with warm, soapy water. Use a soft cloth or sponge to avoid scratching the surface.
3. Rinsing: Rinse thoroughly with clean water to remove all soap residue.
4. Drying: Allow the bin to air dry completely before returning it to the appliance.
5. Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the bin's material and finish.

5. Troubleshooting

• Bin does not slide smoothly: Ensure the roll-out tray is clean and free of any food debris or obstructions. Check for any items placed in the bin that might be catching on the refrigerator interior.
• Bin does not fit: Verify that your refrigerator model is compatible with the 836524 bin. This bin is specifically designed for Fisher & Paykel refrigerators with a bottom freezer and roll-out trays, such as model E522B. It is the larger of two available bin sizes for these models.

6. Specifications

7. Warranty and Support

For warranty information or further support regarding your Fisher & Paykel product, please refer to the documentation provided with your main appliance or visit the official Fisher & Paykel website for detailed customer service options.