Medela Pump in Style Pro Breast Pump User Manual

1. Introduction

The Medela Pump in Style Pro is a double electric breast pump designed for efficient and comfortable milk expression. This manual provides essential information for the safe and effective use, assembly, operation, cleaning, and maintenance of your breast pump. Please read this manual thoroughly before first use and retain it for future reference.

Key features include a clinically proven pumping pattern similar to Medela Symphony hospital-grade pumps, enhanced comfort, and precise control with 16 pumping levels and distinct stimulation and expression modes. Its compact design makes it suitable for use at home or on the go.

Image 1.1: The Medela Pump in Style Pro breast pump unit with two assembled collection bottles and breast shields.

2. Product Components

Your Medela Pump in Style Pro package includes the following items:

• 1 x Pump In Style Pro Breast Pump unit
• 2 x 21 mm PersonalFit Plus Breast Shields
• 2 x 24 mm PersonalFit Plus Breast Shields
• 2 x Connectors with Membranes
• 2 x Bottles with Lids
• 1 x Tubing set
• 1 x Power Adaptor

Image 2.1: A visual representation of all included components: pump unit, bottles, breast shields, connectors, tubing, and power adapter.

3. Assembly and Setup

Follow these steps to assemble your Medela Pump in Style Pro breast pump before first use:

1. Clean and Sanitize: Before initial use, wash and sanitize all parts that come into contact with breast milk according to the "Cleaning and Care" section.
2. Assemble Breast Shields and Connectors: Attach the appropriate size PersonalFit Plus Breast Shield (21mm or 24mm) to a connector. Ensure the membrane is securely in place on the connector.
3. Attach Bottles: Screw a clean collection bottle onto the assembled breast shield and connector.
4. Connect Tubing: Insert one end of the tubing into the port on the assembled connector. Connect the other end of the tubing to the designated port on the pump unit. For double pumping, repeat steps 2-3 for the second set of components and connect the second tubing end to the pump unit.
5. Connect Power: Plug the power adapter into the pump unit and then into a wall outlet.

Image 3.1: The Medela Pump in Style Pro pump unit, assembled breast shields, bottles, tubing, and power adapter, ready for setup.

4. Operating Instructions

The Medela Pump in Style Pro offers two distinct pumping modes and 16 vacuum levels for personalized comfort and efficiency.

4.1 Pumping Modes

• Stimulation Mode: This mode mimics a baby's initial fast, light sucking to stimulate milk let-down. The pump will automatically start in this mode.
• Expression Mode: Once milk begins to flow, switch to expression mode, which uses slower, deeper suction to efficiently remove milk.

4.2 Adjusting Vacuum Levels

The pump features 16 adjustable vacuum levels. Begin pumping at a comfortable vacuum level and gradually increase it until you find the maximum comfortable suction that allows for efficient milk flow. The pump unit has clear level indicators to help you track your settings.

Image 4.1: The pump's control panel, highlighting the 16 level indicators and the mode indicator for stimulation or expression.

4.3 Pumping Session

1. Ensure all parts are clean, assembled, and connected correctly.
2. Center your nipple in the breast shield tunnel.
3. Turn on the pump. It will start in stimulation mode.
4. Once milk begins to flow, press the mode button to switch to expression mode.
5. Adjust the vacuum level to your comfort.
6. Pump for approximately 15-20 minutes, or until milk flow significantly slows.
7. Turn off the pump and carefully detach the breast shields from your breasts.
8. Disconnect bottles and store milk appropriately.

Image 4.2: A user demonstrating comfortable use of the Medela Pump in Style Pro during a pumping session.

5. Cleaning and Care

Proper cleaning and care of your breast pump parts are crucial for hygiene and optimal performance.

5.1 Parts to Clean After Each Use

All parts that come into contact with breast milk (breast shields, connectors, membranes, bottles, lids) must be cleaned after each use.

1. Disassemble: Separate all parts that came into contact with milk.
2. Rinse: Rinse parts under cool running water to remove milk residue.
3. Wash: Wash parts in warm, soapy water using a mild dish soap. Use a clean brush dedicated for feeding equipment.
4. Rinse Thoroughly: Rinse all parts thoroughly under running water.
5. Air Dry: Place parts on a clean paper towel or drying rack and allow them to air dry completely. Do not use a cloth towel to dry, as this can transfer germs.

5.2 Sanitizing

Sanitize parts at least once a day, especially for infants younger than 3 months, those with weakened immune systems, or those born prematurely.

• Boiling: Place disassembled, cleaned parts in a pot of boiling water for 5 minutes.
• Steam Sterilization: Use a microwave steam sterilizer bag or a dedicated electric steam sterilizer according to manufacturer instructions.

5.3 Pump Unit and Tubing

The pump unit and tubing do not come into contact with breast milk and therefore do not require washing or sanitizing. If the tubing becomes visibly dirty or moldy, it should be replaced. Wipe the pump unit with a clean, damp cloth as needed.

6. Troubleshooting

If you encounter issues with your Medela Pump in Style Pro, refer to the following common problems and solutions:

If problems persist, please contact Medela Customer Service for further assistance.

7. Specifications

• Model Number: 101047090
• Material: Plastic
• Item Weight: Approximately 2.96 pounds
• Package Dimensions: 11.81 x 6.38 x 5.2 inches
• Style: Pro Traditional
• Special Features: Double Pump, Lightweight, Portable
• Power Source: Power Adaptor (no batteries required for operation)

8. Important Safety Information

Please observe the following safety precautions to ensure safe operation and prevent injury:

• This product is a single-user item. Using it for multiple users may pose health risks and voids the warranty.
• Always inspect pump parts for damage before each use. Replace any damaged parts immediately.
• Keep the pump unit and power adapter away from water. Do not immerse in water or other liquids.
• Use only the original Medela power adapter provided with the pump.
• Keep out of reach of children.
• Do not use while bathing or showering.
• If you experience pain or discomfort during pumping, discontinue use and consult a healthcare professional or lactation consultant.

9. Warranty and Support

Medela products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Medela website.

For technical support, troubleshooting assistance, or to order replacement parts, please contact Medela Customer Service.

Medela Customer Service: www.medela.com/support