Sordin Supreme Pro-X Ear Muffs User Manual

1. Introduction

Thank you for choosing the Sordin Supreme Pro-X Ear Muffs. These advanced electronic hearing protectors are engineered to provide superior sound amplification for situational awareness while offering robust protection against harmful noise levels. Designed and manufactured in Sweden, the Supreme Pro-X combines comfort, durability, and cutting-edge audio technology for professionals and enthusiasts alike.

Figure 1: Sordin Supreme Pro-X Ear Muffs (Black)

2. Setup

2.1 Battery Installation

The Sordin Supreme Pro-X requires two AAA batteries for operation. To install or replace batteries:

1. Unscrew the battery cap located on the side of one of the ear cups.
2. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Securely screw the battery cap back into place.

For a visual guide on battery replacement, please refer to the video below:

2.2 Adjusting the Headband

Adjust the headband to ensure a snug and comfortable fit. The ear cups should fully enclose your ears, creating a proper seal for optimal hearing protection and sound performance. The textile band provides comfort during extended use.

3. Operating Instructions

3.1 Powering On/Off

Locate the power button on the control panel of the ear cup. Press and hold the button for approximately 3 seconds to power the unit on or off. A confirmation tone will indicate the status change.

3.2 Volume Control and Active Noise Reduction

The Supreme Pro-X features active noise reduction and sound amplification. Use the '+' and '-' buttons on the control panel to adjust the volume of ambient sounds. The system automatically attenuates loud impulse noises, such as gunshots, while amplifying quieter sounds like speech or animal movements.

Figure 2: SordinHEAR Active Noise Amplification Technology

Figure 3: Easy-to-Operate Keypad

3.3 Performance in Tough Conditions

The Supreme Pro-X is built with robust electronics and waterproof microphones to ensure reliable performance even in challenging environments.

Figure 4: Robust Construction for Tough Conditions

4. Maintenance

4.1 Cleaning

To maintain optimal performance and hygiene, regularly clean your Sordin Supreme Pro-X ear muffs. Use a soft, damp cloth to wipe down the exterior surfaces. Avoid using harsh chemicals or abrasive cleaners. The gel ear pads are designed for comfort and hygiene and can be wiped clean.

Figure 5: Comfortable Hygienic Gel Pads

4.2 Storage

When not in use, store the ear muffs in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if the unit will not be used for an extended period to prevent leakage.

5. Troubleshooting

5.1 No Sound or Low Volume

• Ensure the unit is powered on.
• Check battery levels and replace if necessary. Refer to Section 2.1 for battery installation.
• Adjust the volume using the '+' button.

5.2 Intermittent Sound or Distortion

• Ensure batteries are securely seated and making proper contact.
• Check for any physical damage to the ear cups or cables.
• Clean the microphones if they appear obstructed.

5.3 Uncomfortable Fit

• Re-adjust the headband for a better fit.
• Ensure hair or clothing is not interfering with the ear cup seal.

6. Specifications

• Model: Sordin Supreme Pro-X
• Power Source: 2 x AAA Batteries
• Noise Amplification: 1:4 ratio
• Microphones: Waterproof
• Ear Pads: Gel Pads (Hygienic)
• Compliance: Approved according to ANSI S3.19-1974, EN 352-1, EN 352-4, EN 352-8 (level-dependent attenuating earmuffs with audio entertainment input)
• Origin: Imported
• Date First Available: April 16, 2025

Figure 6: Certified Work Protection

7. Warranty and Support

Sordin products are manufactured to high quality standards. For warranty information and technical support, please contact the seller, ACE-Instruments, or refer to the official Sordin website for detailed warranty terms and conditions.

For further assistance, please visit the Sordin Store on Amazon.