VGR 733 6-in-1 Epilator User Manual

Introduction

Thank you for choosing the VGR 733 6-in-1 Epilator. This versatile grooming device is designed to provide a comprehensive personal care experience, offering multiple functions for hair removal, skin cleansing, and massage. This manual provides detailed instructions on how to set up, operate, and maintain your device to ensure optimal performance and longevity.

The VGR 733 features a cordless and rechargeable design, IPX7 waterproofing for wet and dry use, an LED light for enhanced precision, and dual-speed control for customized grooming.

What's Included

Your VGR 733 6-in-1 grooming kit comes with the following components:

The image above illustrates all the components you will find in your VGR 733 package. Each part is designed for specific grooming needs.

• Main Epilator Unit: The core device with power button, LED display, and charging port.
• Epilator Head: For long-lasting hair removal from the root.
• Facial Hair Trimmer: For precise trimming of delicate facial hair.
• Cleansing Facial Brush: For deep facial cleansing.
• Shaver Head: For quick and close shaving.
• Massage Head: For relaxing skin massage.
• Callus Remover: For smoothing rough skin on feet.
• Protective Caps: Various caps for different heads and sensitive areas.
• Cleaning Brush: For maintaining hygiene of the heads.
• USB Charging Cable: For recharging the device.

Setup

Charging the Device

Before first use, fully charge your VGR 733 epilator. The device features a 600mAh lithium battery, providing up to 90 minutes of cordless use after a 1.5-hour charge.

Charging Steps:

1. Connect the USB charging cable to the charging port at the bottom of the main epilator unit.
2. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, power bank, or USB wall adapter).
3. The LED display on the device will show the charging progress. A full charge typically takes about 1.5 hours.
4. Once fully charged, disconnect the cable.

Attaching and Detaching Heads

The VGR 733 comes with interchangeable heads for various functions. Ensure the device is turned off before changing heads.

To Attach a Head:

1. Align the desired head with the main unit.
2. Gently push the head onto the unit until it clicks securely into place.

To Detach a Head:

1. Press the head release button located on the side of the main unit (as shown in the image).
2. Gently pull the head away from the unit.

Operating Instructions

General Operation

The VGR 733 features an ON/OFF button with a travel lock and dual-speed control.

• Power On/Off: Press and hold the power button for a few seconds to turn the device on or off.
• Speed Settings: Once powered on, press the power button briefly to toggle between the two speed settings: a lower speed for sensitive areas and a higher speed for faster trimming or larger areas. The LED display will indicate the current speed.
• LED Light: The integrated LED light automatically illuminates when the device is in use, helping to reveal fine or hard-to-see hairs.

Wet and Dry Use (IPX7 Waterproof)

The VGR 733 is IPX7 waterproof, allowing for safe and convenient use in both wet and dry conditions. You can use it in the shower or bath for a more comfortable experience.

Using the Epilator Head

The epilator head is designed to remove hair from the root, providing longer-lasting smoothness compared to shaving. It is suitable for legs, arms, and delicate areas.

Instructions:

1. Ensure your skin is clean and dry, or use in the shower for wet epilation.
2. Hold the device at a 90-degree angle to your skin.
3. Gently glide the epilator against the direction of hair growth.
4. Stretch the skin taut with your free hand to minimize discomfort.

Using the Shaver Head

The shaver head provides a close and comfortable shave for various body areas.

Instructions:

1. Attach the shaver head to the main unit.
2. Hold the device flat against your skin and glide it gently against the direction of hair growth.
3. Can be used wet or dry.

Using the Facial Hair Trimmer

The facial hair trimmer is ideal for precise removal of fine facial hair.

Instructions:

1. Attach the facial hair trimmer head.
2. Gently move the trimmer over the desired area in small, circular motions or against the direction of hair growth.

Using the Cleansing Facial Brush

The cleansing facial brush helps to deeply clean pores and exfoliate the skin.

Instructions:

1. Attach the cleansing facial brush head.
2. Apply your preferred facial cleanser to your face or directly to the brush.
3. Gently move the brush in circular motions across your face.
4. Rinse your face and the brush thoroughly after use.

Using the Massage Head

The massage head provides a relaxing massage for your skin, promoting circulation.

Instructions:

1. Attach the massage head.
2. Gently glide the massage head over the desired area of your face or body.

Using the Callus Remover

The callus remover head helps to gently remove rough and dry skin from your feet, leaving them smooth.

Instructions:

1. Attach the callus remover head.
2. Ensure your feet are clean and dry.
3. Gently move the callus remover over areas with calluses or rough skin. Do not apply excessive pressure.

Maintenance

Cleaning the Device and Heads

Regular cleaning ensures optimal performance and hygiene of your VGR 733.

• After each use, detach the head and use the included cleaning brush to remove any hair or debris.
• Since the device is IPX7 waterproof, you can rinse the heads and the main unit under running water. Ensure the charging port cover is securely closed before rinsing the main unit.
• Allow all parts to air dry completely before reassembling or storing.
• Do not use abrasive cleaners or harsh chemicals, as these can damage the device.

Storage

Store your VGR 733 and its accessories in a cool, dry place, away from direct sunlight and out of reach of children. Keep all heads and caps together to prevent loss.

Troubleshooting

If you encounter any issues with your VGR 733, please refer to the following table for common problems and their solutions.

Specifications

Key technical specifications for the VGR 733 Epilator:

Warranty and Support

VGR products are manufactured with high-quality standards. For information regarding warranty coverage, product support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official VGR website. Please retain your proof of purchase for any warranty claims.