Bellemave Twin Over Twin Metal Loft Bed with Desk and Wardrobe Instruction Manual (Model TH-00362-T-G)

Introduction

Thank you for choosing the Bellemave Twin Over Twin Metal Loft Bed. This innovative bed system is designed to maximize space efficiency, offering two twin-sized sleeping areas, integrated desks, a wardrobe, and convenient charging stations. This manual provides essential information for safe assembly, operation, and maintenance of your new loft bed.

Angled view of the Bellemave Twin Over Twin Metal Loft Bed, highlighting its comprehensive design with beds, desks, and storage. — This image offers a broader view of the entire loft bed system, demonstrating how all components are integrated into a single, space-saving unit.

Safety Information

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions can result in serious injury.

Do not exceed the weight capacity of 350 lbs for each bed.
Be cautious of sharp edges and pinch points during assembly and use.
Keep small parts away from children during assembly.
Follow assembly instructions carefully to prevent instability or collapse.
Always supervise children when they are using the bed, especially on the upper bunk.
Ensure all connections are securely tightened before use and periodically check for tightness.
Only use mattresses that comply with the recommended dimensions for twin beds.
The top bunk is not suitable for children under six years of age.

Setup and Assembly

Assembly of this loft bed requires two adults. All necessary hardware and tools are included. An illustrated installation manual is provided in the packaging. Please ensure you have received all components before beginning assembly.

Note: The package is divided into 2 boxes, which may arrive at different times. Please wait for all boxes to arrive before starting assembly.

Dimensions Overview

Diagram showing the dimensions of the Bellemave Twin Over Twin Metal Loft Bed in inches. — This diagram illustrates the overall length, width, height, and individual component measurements of the loft bed, including bed platforms, desk surfaces, and storage shelves. All measurements are in inches.

Assembly Steps

Unpack all components and verify against the parts list in the included manual.
Lay out all parts on a clean, soft surface to prevent scratches.
Follow the step-by-step instructions in the illustrated manual, paying close attention to diagrams.
Ensure all bolts and screws are finger-tightened initially, then fully tighten once the entire structure is assembled and aligned.
Do not overtighten fasteners to avoid damaging the material.
Once assembled, check the stability of the bed and ensure all guardrails are securely in place.

Operating Instructions

Using the Beds

The loft bed features two twin-sized sleeping platforms. Ensure mattresses are properly sized and placed within the bed frames. The upper bunk is accessed via the integrated staircase. Always use the provided guardrails for safety on the upper bunk.

Children relaxing on the Bellemave Twin Over Twin Metal Loft Bed, with a close-up view of the integrated charging station. — This image highlights the convenience of the built-in charging station located on the bed's structure, allowing easy access for electronic devices while relaxing on the bed.

Utilizing the Desk Areas

Two integrated desks are located beneath the loft beds, providing dedicated spaces for study, work, or creative activities. Position chairs comfortably to ensure proper ergonomics.

Two children seated at desks beneath the Bellemave Twin Over Twin Metal Loft Bed, illustrating the dual study areas. — This image demonstrates the functional design of the loft bed, providing two separate desk areas for study or work, maximizing space efficiency.

Charging Station Functionality

The loft bed includes multiple power outlets for charging electronic devices. There is a power outlet in the middle of the double desk and another in the middle of the bunk structure. Connect your devices to these outlets for convenient charging.

Close-up of the central storage unit and charging station within the Bellemave Twin Over Twin Metal Loft Bed. — This view focuses on the design of the central structure, which includes shelves and a power outlet for charging devices.

Wardrobe and Storage Shelves

A wardrobe with a clothes rack is integrated into the bed structure for hanging garments. Additional open shelves are available for storing books, decorations, or other personal items.

Front view of the Bellemave Twin Over Twin Metal Loft Bed, showcasing the integrated wardrobe and shelving units. — This image details the storage solutions, including a wardrobe with a clothes rack and multiple open shelves for organization.

Maintenance

Cleaning: Wipe down metal and woodgrain surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
Fastener Check: Periodically check all bolts, screws, and connections to ensure they remain tight. Retighten as necessary to maintain structural integrity.
Weight Distribution: Distribute weight evenly on the beds and shelves to prevent stress on the frame.
Avoid Excessive Moisture: Protect woodgrain surfaces from prolonged exposure to moisture.

Troubleshooting

Common Issues and Solutions

Squeaking Noises: Check all bolts and screws. Tighten any loose fasteners. Ensure the bed is on a level surface.
Instability/Wobbling: Verify that all components are correctly assembled according to the manual. Ensure all connections are fully tightened.
Missing or Damaged Parts: If you discover any missing or damaged parts during unpacking or assembly, do not proceed with assembly. Contact customer support immediately for assistance.
Charging Station Not Working: Ensure the power cord is securely plugged into a functional wall outlet. Check for any visible damage to the charging station or its cable.

Specifications

Feature	Detail
Model Number	TH-00362-T-G
Brand	Bellemave
Size	Twin Over Twin
Product Dimensions	99.4"L x 78"W x 66"H
Material	Heavy Duty Metal with Woodgrain Finish
Weight Capacity	350 lbs per bed
Special Features	Integrated Desks, Wardrobe, Charging Station, No Box Spring Needed, Space Saving
Assembly Required	Yes (Illustrated manual included)
Color	Woodgrain Double

Warranty and Support

For any questions, concerns, or assistance with your Bellemave Twin Over Twin Metal Loft Bed, please contact our customer support team.

Customer Support Email: US-VC@bellemavehome.com
Returns: This product is eligible for 90-day easy returns. Please refer to your purchase platform's return policy for details.
Protection Plans: Extended protection plans may be available for purchase. Check with your retailer for options such as 3-Year Protection Plan or Complete Protect.

	Bellemave Bunk Bed Assembly Instructions - FU291CPCAN Comprehensive assembly guide for the Bellemave FU291CPCAN bunk bed. Includes detailed steps for configuring as three single beds or a stacked bunk bed, with part lists, hardware, and safety information.
	Assembly Instructions for Bellemave Twin Loft Bed with Stair (Model YX5525) Detailed assembly instructions for the Bellemave Twin Loft Bed with Stair, model YX5525. Includes a comprehensive part list, hardware list, and step-by-step guidance with textual descriptions of diagrams.
	Twin House Bed Assembly Instructions - SWB001/SWB002 Detailed assembly instructions for the Bellemave Twin House Bed (models SWB001/SWB002), including a part list, hardware list, and step-by-step guidance for construction.
	Assembly Instructions for Twin House Floor Bed with Fence Detailed assembly instructions for the Bellemave Twin House Floor Bed with Fence, including a parts list, hardware list, and step-by-step guidance.
	Assembly Instructions for Bellemave Queen Size Bed Frame Detailed assembly instructions for the Bellemave Queen Size Bed Frame (Models W1580113784, W1580113785, W1580113786), including part lists, hardware details, and step-by-step guidance for assembly.

Bellemave TH-00362-T-G

Bellemave Twin Over Twin Metal Loft Bed with Desk and Wardrobe Instruction Manual