Introduction
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your PUTORSEN Universal Speaker Wall Mounts. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- Ensure the mounting surface can safely support the combined weight of the mounts and your speakers.
- Use appropriate tools and hardware for your specific wall type. Wall anchors are required for concrete and brick walls.
- Do not exceed the maximum load capacity of 25 kg (55 lbs) per mount.
- Keep children and pets away from the installation area.
- If unsure about any part of the installation, consult a qualified professional.
- This product is not suitable for drywall installation without proper reinforcement.
Package Contents
Verify that all components are present before beginning installation:
- 2 x PUTORSEN Universal Speaker Wall Mounts
- 1 x Screw Pack (various screws and wall anchors)
- 1 x User Manual
Product Features
- Universal Compatibility: Designed to accommodate speakers with a width of 130mm to 285mm (5.1" to 11.2") and a depth of up to 240mm (9.5").
- High Load Capacity: Each mount safely supports speakers up to 25 kg (55 lbs).
- Full Adjustability:
- Rotation: ±180° (speaker platform)
- Tilt: +10° to -10°
- Swivel Range: +45° to -45°
- Robust Construction: Features independent left and right clamping arms with fine-threaded screws and protective sponge pads.
- Integrated Cable Management: Helps maintain a tidy appearance.
Specifications
| Brand | PUTORSEN |
| Model Number | MT-SMB-75 |
| Material | Metal |
| Color | Black |
| Mounting Type | Wall Mount |
| Max Load Capacity | 25 kg (55 lbs) per mount |
| Speaker Width Range | 130mm - 285mm (5.1" - 11.2") |
| Speaker Depth (Length) | Up to 240mm (9.5") |
| Tilt Adjustment | ±10° |
| Swivel Adjustment | ±45° |
| Rotation Adjustment | ±180° (speaker platform) |
| Item Weight | 2.13 kg |
| Country of Origin | China |
Setup and Installation
Follow these steps for proper installation of your speaker wall mounts.
1. Check Speaker Compatibility
Ensure your speakers fit within the specified dimensions:
- Width: 130mm to 285mm (5.1" to 11.2")
- Depth: Up to 240mm (9.5")
Image: Speaker compatibility and weight capacity details.
2. Product Dimensions Overview
Refer to the diagram below for the overall dimensions of the speaker wall mount.
Image: Overall product dimensions of the PUTORSEN speaker wall mount.
3. Choose Mounting Location and Wall Type
Select a sturdy wall location. The mounts are suitable for:
- Concrete Walls (requires wall anchors)
- Single Wood Studs
- Brick Walls (requires wall anchors)
Important: Not for drywall installation without additional reinforcement.
Image: Suitable wall types for mounting and a warning against drywall installation.
4. Mark Drilling Points
Hold the wall plate against the desired mounting location. Use a pencil to mark the drilling points. Ensure the marks are level.
5. Drill Pilot Holes
Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the provided screws/anchors. For concrete and brick, insert the wall anchors into the drilled holes.
6. Attach Wall Plate
Align the wall plate with the pilot holes (and anchors, if applicable). Secure the wall plate to the wall using the appropriate screws from the screw pack. Ensure it is firmly attached.
7. Assemble Speaker Platform
Attach the speaker platform to the arm assembly. The platform features adjustable clamping arms. Adjust these arms to fit the width of your speaker (130mm to 285mm) and secure them using the fine-threaded screws. Apply the sponge pads to protect your speaker.
8. Mount Speaker
Carefully place your speaker onto the assembled platform. Ensure it is centered and stable before releasing your grip.
Operation and Adjustment
The PUTORSEN speaker mounts offer multiple adjustment options to optimize your listening experience.
Adjusting Speaker Position
- Tilt: Loosen the tilt adjustment knob/screw to adjust the speaker ±10° up or down. Tighten to secure.
- Swivel: Loosen the swivel adjustment knob/screw to swivel the speaker ±45° left or right. Tighten to secure.
- Rotation: The speaker platform can be rotated ±180° to fine-tune the speaker's orientation. Loosen the central screw on the platform, adjust, and re-tighten.
Image: Detailed view of the mount's rotation, tilt, and swivel adjustments.
Cable Management
Utilize the integrated cable management features to route speaker wires neatly along the mount arm, reducing clutter and improving aesthetics.
Maintenance
- Periodically check all screws and connections to ensure they remain tight and secure.
- Clean the mounts with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang additional items on the mounts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount feels unstable after installation. | Screws are not fully tightened; incorrect wall anchors used; wall surface is not strong enough. | Ensure all screws are securely tightened. Verify correct wall anchors were used for your wall type. If the wall is insufficient, relocate the mount to a stronger section or reinforce the wall. |
| Speaker slides on the platform. | Clamping arms are not tight enough; sponge pads are missing or worn. | Tighten the fine-threaded screws on the clamping arms. Ensure sponge pads are in place and provide adequate grip. Replace worn pads if necessary. |
| Difficulty adjusting tilt/swivel/rotation. | Adjustment knobs/screws are too tight. | Loosen the relevant adjustment knob or screw slightly before attempting to adjust. Do not force adjustments. |
Warranty and Support
PUTORSEN products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official PUTORSEN website. Please have your model number (MT-SMB-75) and purchase information ready when contacting support.