Kircuit 5V 2A USBC Car Charger Instruction Manual

Product Overview

The Kircuit 5V 2A USBC Car Charger is designed to provide reliable power to your compatible devices, such as the WANLIPO A13 Dash Cam. This adapter efficiently converts your vehicle's DC power into the necessary 5V 2A output for charging or operating your device. It serves as a portable power source for use in your car, ensuring your devices remain powered on the go.

This product has been rigorously tested to ensure compatibility and optimal performance with specified devices.

Figure 1: Kircuit 5V 2A USBC Car Charger (left) and accompanying USB-C cable (right).

Setup Instructions

1. Identify the Car Charger Port: Locate the 12V accessory power outlet (cigarette lighter socket) in your vehicle.
2. Insert the Charger: Firmly insert the Kircuit car charger into the 12V accessory power outlet. Ensure it is fully seated for a stable connection.
3. Connect Your Device: Use the provided USB-C cable (or your device's original USB-C cable) to connect your WANLIPO A13 Dash Cam or other compatible device to the USB-C port on the car charger.
4. Verify Connection: Once connected, your device should indicate that it is receiving power or charging.

Operating Instructions

Once properly set up, the Kircuit car charger operates automatically when the vehicle's accessory power outlet is active. It provides a consistent 5V 2A power output to your connected device.

• Automatic Power Delivery: The charger will begin supplying power as soon as it is plugged into an active 12V outlet and a device is connected.
• Device Compatibility: This charger is specifically designed for devices requiring 5V 2A via a USB-C connection, such as the WANLIPO A13 Dash Cam (Model: TSY-01, TSY01). Using it with devices outside these specifications may result in improper charging or damage.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your car charger.

• Keep Clean: Periodically wipe the charger with a dry, soft cloth to remove dust and debris. Avoid using liquid cleaners.
• Store Properly: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Handle with Care: Avoid dropping the charger or subjecting it to strong impacts. Do not pull the cable forcefully when disconnecting.
• Inspect for Damage: Regularly check the charger and cable for any signs of wear, fraying, or damage. Discontinue use if damage is observed.

Troubleshooting

If you encounter issues with your Kircuit car charger, try the following steps:

• Charger Not Providing Power:
  • Ensure the car charger is fully inserted into the 12V accessory power outlet.
  • Check if the vehicle's ignition is on, as some outlets only receive power when the vehicle is running or in accessory mode.
  • Verify the vehicle's fuse for the 12V outlet is not blown. Consult your vehicle's owner's manual for fuse box location and replacement instructions.
  • Try connecting a different, known-working device to the charger to rule out an issue with your primary device.
  • Try the charger in a different vehicle's 12V outlet, if available.
• Slow Charging or Intermittent Connection:
  • Ensure the USB-C cable is securely connected to both the charger and your device.
  • Confirm that your device is compatible with 5V 2A input. Using the charger with devices requiring higher power may result in slow charging.
  • Inspect the USB-C cable for any damage or wear. A damaged cable can cause poor connection or charging issues.
• Overheating:
  • It is normal for the charger to feel slightly warm during operation. However, if it becomes excessively hot, disconnect it immediately.
  • Ensure there is adequate ventilation around the charger and it is not covered.
  • Verify that the connected device is not drawing more power than the charger is rated for (5V 2A).

If issues persist after following these steps, contact customer support.

Specifications

Warranty and Support

Information regarding product warranty and customer support was not provided in the available documentation. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support for your Kircuit car charger.