Introduction
This manual provides essential information for the safe and effective use of your Jaspertronics YODN 230W 7R Moving Head Light Discharge Lamp. This lamp is specifically designed for the TECSHOW by American PRO Ion 230B Fixture, offering high intensity and a long, reliable lifetime for professional stage lighting applications. Please read these instructions carefully before installation and operation.
Image: The Jaspertronics YODN 230W 7R Moving Head Light Discharge Lamp, showcasing its design and connection pins.
Key Features:
- High Intensity: Delivers powerful illumination for dynamic stage effects.
- Extended Lifetime: Average lamp lifetime of up to 2,000 hours.
- Optimal Optical System: Engineered for maximum light output and clarity.
- Compact Design: Perfectly suited for small and lightweight moving heads.
- Broad Compatibility: Designed for the TECSHOW by American PRO Ion 230B Fixture and other compatible models.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the lamp and fixture:
- Ensure the fixture is disconnected from power before installation or maintenance.
- Allow the lamp to cool completely before handling. Hot lamps can cause severe burns.
- Do not touch the glass part of the lamp with bare hands. Oils from skin can create hot spots and reduce lamp life. Use clean gloves or a soft cloth.
- Handle the lamp with care to avoid breakage. Discharge lamps contain high-pressure gas and can shatter if dropped or mishandled.
- Dispose of old lamps according to local regulations for hazardous waste.
Setup and Installation
Follow these steps for proper installation of the YODN 230W 7R lamp into your compatible moving head fixture.
- Power Disconnection: Ensure the moving head fixture is turned off and completely disconnected from the main power supply.
- Cool Down: Allow the fixture and the old lamp (if replacing) to cool down for at least 30 minutes.
- Access Lamp Compartment: Refer to your fixture's specific manual to locate and open the lamp access compartment. This usually involves unscrewing a cover or releasing a latch.
- Remove Old Lamp (if applicable): Carefully unclip or unscrew the old lamp from its socket. Handle it by the ceramic base, avoiding contact with the glass.
- Install New Lamp: Wearing clean gloves, carefully insert the new Jaspertronics YODN 230W 7R lamp into the lamp socket. Ensure the pins align correctly and the lamp is seated firmly. Do not force it.
Image: An example of a discharge lamp being installed into a fixture housing. Note the importance of handling the lamp by its base.
- Secure Lamp: Re-secure the lamp with any clips or screws as per your fixture's design.
- Close Compartment: Close and secure the lamp access compartment cover.
- Reconnect Power: Reconnect the fixture to the power supply.
Operating Instructions
Once the lamp is installed, follow your moving head fixture's operating manual for specific control and programming. General operating considerations for discharge lamps include:
- Warm-up Time: Discharge lamps require a short warm-up period to reach full brightness and stable color temperature.
- Cool-down Time: Always allow the lamp to cool down for at least 5-10 minutes after turning off before restarting. Rapid restarts can significantly reduce lamp life.
- Avoid Frequent On/Off Cycles: Minimize turning the lamp on and off frequently, as this can also shorten its lifespan.
- Ventilation: Ensure adequate ventilation for the fixture to prevent overheating, which can damage the lamp and other components.
Maintenance
Proper maintenance ensures optimal performance and extends the life of your lamp.
- Regular Cleaning: Periodically clean the fixture's lenses and reflectors to maintain light output. Use a soft, lint-free cloth and a suitable optical cleaning solution.
- Lamp Replacement: Replace the lamp when it reaches its average rated life or if you notice a significant decrease in brightness or a change in color.
- Inspection: Regularly inspect the lamp and its connections for any signs of wear, damage, or loose contacts.
Troubleshooting
If you encounter issues with your lamp, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not ignite | No power to fixture, faulty ignitor, improperly seated lamp, lamp reached end of life. | Check power connection. Verify lamp is correctly installed. Consult fixture manual for ignitor issues. Replace lamp if at end of life. |
| Lamp flickers or dims | Unstable power supply, lamp nearing end of life, poor connection. | Ensure stable power. Replace lamp if it's old. Check lamp connections. |
| Reduced brightness | Dirty optics, lamp nearing end of life. | Clean fixture lenses and reflectors. Replace lamp. |
| Lamp explodes or shatters | Overheating, physical damage, manufacturing defect. | Ensure proper ventilation. Handle with extreme care. Contact support if new lamp fails prematurely. |
Specifications
Detailed technical specifications for the Jaspertronics YODN 230W 7R Moving Head Light Discharge Lamp.
| Specification | Detail |
|---|---|
| Lamp Type | YODN 230W 7R Discharge Lamp |
| Compatibility | TECSHOW by American PRO Ion 230B Fixture and others (see cross-reference) |
| Average Lamp Lifetime | Up to 2,000 Hours |
| Product Dimensions | 2 x 2 x 2.4 inches |
| Item Weight | 3.2 ounces |
| Manufacturer | Jaspertronics |
| ASIN | B0F494LM13 |
Cross Reference Table
The following table provides a cross-reference for various YODN lamp models and their equivalents from Osram Sirius and Philips MSD Platinum.
Image: A cross-reference table detailing YODN model names and their corresponding Osram Sirius and Philips MSD Platinum equivalents.
Product Overview Video
Watch this video for an overview of stage lighting bulbs, including the Jaspertronics YODN 230W 7R lamp.
Video: An informational video from Jaspertronics, LLC, providing an overview of various stage lighting bulbs. This video highlights the quality and application of these specialized lamps.
Warranty and Support
Jaspertronics stands behind the quality of its products. For specific warranty details, please refer to the documentation included with your purchase or visit the official Jaspertronics website. For technical support, replacement parts, or any inquiries, please contact Jaspertronics customer service.
Contact Information:
Please visit the Jaspertronics Store on Amazon for further assistance and product information.