Milex Mighty Scrub 7-in-1 Cordless Cleaning Brush

1. Important Safety Instructions

Please read all instructions carefully before using the Milex Mighty Scrub 7-in-1. Retain this manual for future reference.

• Electrical Safety: Use only the provided Type-C charging cable and a compatible 5V 1A adapter. Do not attempt to modify the charging system.
• Water Exposure: The device has an IPX6 waterproof rating, meaning it can withstand strong jets of water. However, avoid immersing the power buttons in water to prevent damage. Do not submerge the entire unit.
• Children and Pets: Keep the device out of reach of children and pets. This is not a toy.
• Storage: Store the device in a dry, cool place when not in use.
• Maintenance: Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel for any repairs.
• Brush Head Safety: Ensure brush heads are securely attached before operation. Do not apply excessive force that could damage surfaces or the device.

Image: The Milex Mighty Scrub 7-in-1 highlighting its IPX6 waterproof rating, 45-80 minutes working time, and 2.5-hour Type-C quick charge. A crucial safety note advises against immersing the power buttons in water.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x Milex Mighty Scrub 7-in-1 Main Unit
• 1 x Dome Brush
• 1 x Flat Brush
• 1 x Pointed Brush
• 1 x Scouring Pad
• 1 x Sponge Attachment
• 1 x Velcro Base
• 1 x Wool Cloth
• 1 x Type-C Charging Cable (Adapter not included)

Image: A visual representation of the seven interchangeable brush heads included with the Milex Mighty Scrub 7-in-1: Flat Brush, Velcro Base, Pointed Brush, Dome Brush, Wool Cloth, Sponge Attachment, and Scouring Pad.

3. Setup

3.1 Charging the Device

1. Locate the Type-C charging port on the main unit.
2. Connect the provided Type-C charging cable to the device.
3. Plug the other end of the cable into a compatible 5V 1A USB power adapter (not included) or a USB port.
4. The battery indicator lights will illuminate during charging. A full charge takes approximately 2.5 hours.
5. Once fully charged, the device will provide 45 to 80 minutes of working time, depending on the intensity of use.

3.2 Assembling the Handle

The Milex Mighty Scrub features an adjustable handle for various cleaning tasks.

1. To extend the handle, twist the locking collar counter-clockwise to loosen, pull the handle to the desired length (up to 130cm), and then twist clockwise to secure.
2. To shorten the handle, twist the locking collar counter-clockwise, push the handle inwards (to 105cm or 28cm for handheld use), and twist clockwise to secure.

3.3 Attaching Brush Heads

1. Ensure the device is turned off before attaching or detaching brush heads.
2. Align the desired brush head with the rotating base of the main unit.
3. Push firmly until it clicks into place.
4. To remove, pull the brush head away from the base.

Image: The Milex Mighty Scrub 7-in-1 cordless cleaning brush fully assembled with its handle extended, ready for use.

4. Operating Instructions

4.1 Powering On/Off

Press the power button located on the handle to turn the device on. Press it again to turn off.

4.2 Using the Different Brush Heads

Select the appropriate brush head for your cleaning task:

• Flat Brush: Ideal for large flat surfaces like floors, walls, and shower doors.
• Dome Brush: Suitable for curved surfaces such as bathtubs, sinks, and toilet bowls.
• Pointed Brush: Designed for corners, grout lines, and tight spaces.
• Scouring Pad: For tough stains and grime on durable surfaces.
• Sponge Attachment: Gentle cleaning and polishing of delicate surfaces.
• Velcro Base with Wool Cloth: For polishing and buffing tasks.

The Milex Mighty Scrub features a 360-degree spinning action for effective cleaning. Apply light pressure and let the brush do the work.

Image: A person using the Milex Mighty Scrub 7-in-1 to clean a kitchen floor, demonstrating its effectiveness on hard surfaces.

Image: A close-up view of the Milex Mighty Scrub's brush head in action, illustrating its 360-degree spinning capability for thorough cleaning.

5. Maintenance

5.1 Cleaning the Main Unit

After each use, wipe the main unit with a damp cloth. Do not use abrasive cleaners or immerse the unit in water, especially near the power buttons.

5.2 Cleaning Brush Heads

Remove the brush head from the device. Rinse the brush head under running water to remove dirt and debris. For stubborn grime, use a mild soap. Allow brush heads to air dry completely before storing or reattaching.

5.3 Storage

Store the Milex Mighty Scrub 7-in-1 and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

• Device not turning on: Ensure the device is fully charged. Check the battery indicator lights.
• Brush head not spinning: Verify that the brush head is securely attached to the main unit. Check for any obstructions.
• Reduced performance: The battery might be low; recharge the device. Ensure the brush head is clean and not worn out.
• Charging issues: Ensure the Type-C cable is properly connected to both the device and the power source. Try a different compatible 5V 1A adapter.

If problems persist, please contact Milex customer support.

7. Specifications

Image: Key specifications of the Milex Mighty Scrub 7-in-1, including body and handle materials (ABS, Stainless Steel), battery (2500mAh, 3.7V), charging type (Type-C), waterproof level (IPX6), working time (45-80 mins), and adjustable lengths (130cm, 105cm, 28cm).

8. Warranty and Support

Specific warranty information for the Milex Mighty Scrub 7-in-1 is not provided in this manual. Please refer to the product packaging or your point of purchase for warranty details.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Milex customer service through their official website or the retailer from whom you purchased the product.

Manufacturer: Milex