roborock Zeo One Washer Dryer User Manual

1. Important Safety Information

Please read all instructions carefully before using the appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

1.1 General Safety

• This appliance is intended for household use only.
• Do not allow children to play with the appliance. Supervise children when the appliance is in use.
• Ensure the appliance is properly grounded.
• Do not install or store the appliance where it will be exposed to temperatures below freezing or weather conditions.

1.2 Electrical Safety

• Connect the appliance to a dedicated power outlet with the correct voltage (230V AC).
• Do not use extension cords or adapters.
• Never pull the power cord to disconnect the appliance. Always grasp the plug firmly.

1.3 Water Safety

• Ensure water inlet and drain hoses are securely connected to prevent leaks.
• Do not operate the appliance if there is a water leak.

2. Product Overview

The roborock Zeo One is an advanced all-in-one washer dryer designed to simplify your laundry routine. It combines powerful washing capabilities with efficient drying technology, featuring a large capacity and smart controls.

Figure 2.1: The roborock Zeo One Washer Dryer, showcasing its sleek design and accompanying mobile application.

2.1 Key Components

• Control Panel: Intuitive touch interface for program selection and settings.
• Detergent Dispenser: Compartments for detergent, fabric softener, and automatic dosing.
• Drum: Stainless steel drum for washing and drying.
• Door: Front-loading door with safety lock.

3. Key Features

The Zeo One is equipped with innovative technologies to provide superior laundry care.

3.1 Space-Saving Design

This all-in-one unit combines washing and drying functions, saving valuable space in your home. It offers a generous 10 kg washing capacity and a 6 kg drying capacity, suitable for family-sized loads.

Figure 3.1: The compact design of the Zeo One, highlighting its 10 kg washing and 6 kg drying capabilities.

3.2 Zeo-Cycle Drying Technology

Utilizing zeolite dehumidification technology and precise temperature sensors, the Zeo-Cycle system prevents overheating and ensures even drying, minimizing damage to delicate fabrics. The maximum drying temperature is 50°C.

Figure 3.2: An internal view diagram of the Zeo-Cycle drying technology, showing air flow and the controlled temperature of 50°C.

3.3 Prevention of Textile Damage

Specialized wash programs, such as the wool washing program, gently clean and dry sensitive textiles at a maximum of 37°C to protect fabric fibers and prevent damage.

Figure 3.3: The Zeo One designed for gentle fabric care, particularly for wool, with certifications displayed.

3.4 Concentrated Stain Removal

The Roborock Zeo One effectively removes stubborn stains from various sources like wine, ketchup, coffee, and lipstick, often without the need for manual pre-treatment.

Figure 3.4: The Zeo One's disinfecting capabilities, targeting common allergens and microbes.

3.5 Automatic Dosing System

The large-capacity detergent container can hold enough detergent for approximately 30 days. The appliance automatically dispenses the optimal amount of detergent and fabric softener based on the laundry volume, eliminating the need for manual refilling before each wash.

Figure 3.5: Illustrations of the Zeo One's automatic wash and dosing solutions, including smart detection and app control.

3.6 Smart Washing Modes & App Control

Choose from 27 smart washing modes tailored for various fabrics like down, sports apparel, or silk. The dedicated app allows for real-time monitoring of wash progress, remaining time, and notifications for scheduled starts or low detergent levels.

3.7 LintClear Self-Cleaning System

The integrated LintClear system ensures efficient removal of lint during the drying process, maintaining optimal performance and preventing blockages.

Figure 3.6: The Zeo One's high-efficiency cleaning and air optimization features, including Smart-Care and drum cleaning.

3.8 Gentle and Quiet DD-Motor

The Direct Drive (DD) motor reduces vibrations and noise during operation, ensuring a quiet laundry experience while precisely controlling the wash cycle to protect textiles.

Figure 3.7: The quiet performance of the Zeo One, showing noise levels during different cycles: Washing (<48dB), Spinning (<68dB), Drying (<60dB).

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your appliance. It is recommended to have the appliance installed by a qualified technician.

4.1 Unpacking and Inspection

1. Carefully remove all packaging materials.
2. Inspect the appliance for any shipping damage. Report any damage to your retailer immediately.
3. Ensure all included components are present: 1 x washer dryer, 1 x user manual, 1 x water inlet hose, 4 x keys, 1 x transport safety screw cover, 4 x noise dampening pads.

4.2 Removing Transport Bolts

Before use, you must remove the transport bolts located at the rear of the appliance. These bolts secure the drum during transit and must be removed to prevent damage during operation.

1. Locate the transport bolts on the back panel.
2. Use the provided key or a suitable wrench to loosen and remove all bolts.
3. Insert the transport safety screw covers into the holes.

4.3 Leveling the Appliance

The appliance must be perfectly level to prevent excessive vibration and noise during operation.

• Place a spirit level on top of the appliance.
• Adjust the leveling feet at the bottom of the appliance until it is stable and level.

4.4 Water Supply Connection

Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Ensure the connection is tight to prevent leaks.

4.5 Drain Hose Connection

Securely connect the drain hose to a suitable drain pipe or place it over the edge of a sink, ensuring it is properly secured to prevent displacement.

4.6 Electrical Connection

Plug the power cord into a grounded 230V AC electrical outlet. Do not overload the circuit.

5. Operating Instructions

Follow these steps for optimal performance and care of your laundry.

5.1 Control Panel Overview

The intuitive touch panel allows for easy selection of wash and dry modes.

Figure 5.1: Close-up of the Zeo One's touch control panel, demonstrating ease of use.

5.2 Loading Laundry

• Sort laundry by fabric type, color, and degree of soiling.
• Open the door and load laundry into the drum, ensuring not to overload. Leave enough space for clothes to tumble freely.

5.3 Adding Detergent/Fabric Softener

• For automatic dosing, ensure the detergent and fabric softener compartments are filled. The appliance will automatically dispense the correct amount.
• For manual dosing, add detergent to the appropriate compartment according to the detergent manufacturer's instructions and the load size.

5.4 Selecting a Program

• Turn on the appliance.
• Use the control panel to select one of the 27 smart washing modes or a combined wash and dry program.
• Adjust additional settings such as temperature, spin speed, or drying level if desired.

5.5 Starting a Cycle

• Close the door firmly.
• Press the 'Start/Pause' button to begin the selected cycle.

5.6 Using the Roborock App

• Download the official Roborock app from your smartphone's app store.
• Follow the in-app instructions to connect your Zeo One washer dryer.
• Use the app to remotely start/stop cycles, monitor progress, receive notifications, and customize settings.

6. Maintenance and Care

Regular maintenance ensures the longevity and optimal performance of your Zeo One.

6.1 Cleaning the Exterior

• Wipe the exterior surfaces with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.

6.2 Cleaning the Detergent Dispenser

• Periodically remove the detergent dispenser drawer.
• Rinse it under running water to remove any residue.
• Clean the dispenser housing with a brush if necessary.

6.3 Drum Cleaning

The Zeo One features high-temperature drum cleaning modes (60°C/90°C) to maintain hygiene and prevent odors.

• Run a drum cleaning cycle regularly, especially if you notice odors or residue.
• Refer to the control panel or app for specific instructions on initiating this cycle.

6.4 LintClear System Maintenance

The LintClear self-cleaning system minimizes manual lint removal. However, occasional checks are recommended.

• Consult the user manual for specific instructions on accessing and cleaning any accessible lint filters or traps.

6.5 Cleaning the Drain Pump Filter

• Locate the drain pump filter, usually at the bottom front of the appliance.
• Place a shallow container underneath to catch any residual water.
• Carefully unscrew and remove the filter.
• Clean the filter under running water and remove any debris.
• Reinsert and securely tighten the filter.

7. Troubleshooting

If you encounter issues with your Zeo One, refer to the following common problems and solutions.

7.1 Error Codes

If an error code appears on the display, consult the full user manual for a detailed explanation and troubleshooting steps specific to that code. In most cases, turning the appliance off and on again may resolve minor errors.

8. Specifications

9. Warranty and Support

Your roborock Zeo One Washer Dryer comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

9.1 Customer Support

For technical assistance, service requests, or inquiries about your product, please contact roborock customer support through their official website or the contact information provided in your warranty documentation.