1. Introduction
The EASYGUARD EC208 is an advanced FSK 2-way car alarm system designed to provide enhanced security for your vehicle. It features a rechargeable LCD pager remote for real-time monitoring and a long remote working distance of up to 600 meters in open spaces. This manual provides essential information for the proper installation, operation, and maintenance of your EC208 system.
2. Product Overview
2.1 Package Contents
The EASYGUARD EC208 system typically includes the following components:
- Main Control Unit
- Two (2) Rechargeable LCD Pager Remotes
- Main Wiring Harness
- Siren
- Shock Sensor
- Antenna Module
- USB Charging Cable for Remotes
- Relay
- LED Indicator
Image 1: All components included with the EASYGUARD EC208 FSK 2 Way Car Alarm System.
2.2 Key Features
- 2-Way communication with FSK technology for reliable signal transmission.
- Rechargeable LCD pager remote for real-time vehicle status monitoring.
- Long remote operating distance, up to 600 meters in open areas.
- Integrated shock alarm warning.
- Remote trunk release function.
- Compatible with most DC12V petrol vehicles.
3. Setup and Installation
IMPORTANT: Professional car alarm installer installation is required if you do not have prior experience with car alarm system wiring and installation.
- Before commencing installation, carefully read and understand the provided wiring diagram.
- Always connect the ground (GND) wires first when making any wire connections to prevent electrical damage.
- This system is designed for DC12V petrol vehicles. Installation in diesel vehicles may require additional components, such as an extra timer delay switch, which are not included.
- Ensure all connections are secure and properly insulated to prevent short circuits and ensure reliable operation.
4. Operating Instructions
4.1 Remote Control Functions
The LCD pager remote allows for various functions and provides real-time feedback from your vehicle. Familiarize yourself with the buttons and display icons.
- Arming the System: Press the lock button once to arm the system. The remote will confirm with an audible tone and display the armed status.
- Disarming the System: Press the unlock button once to disarm the system. The remote will confirm and display the disarmed status.
- Remote Trunk Release: Press and hold the trunk release button (if available and connected) to open the vehicle's trunk.
- Silent Arm/Disarm: Refer to the detailed wiring diagram for specific button combinations to arm or disarm the system without audible confirmation from the siren.
- Panic Mode: Press a designated button (refer to wiring diagram) to trigger the alarm immediately in an emergency.
- LCD Pager Display: The LCD screen provides visual alerts for shock warnings, door open status, battery level, and other system events.
4.2 Charging the Remote
The LCD pager remote features a rechargeable battery. Connect the remote to a standard USB power source using the provided USB charging cable when the battery indicator on the LCD shows low power.
5. Maintenance
- Keep the remote controls dry and clean. Avoid exposure to extreme temperatures or direct sunlight.
- Regularly charge the remote control's rechargeable battery to ensure optimal performance.
- Periodically inspect all visible wiring connections for security and signs of wear.
- Do not attempt to open or repair the main control unit or remote controls yourself, as this may void the warranty.
6. Troubleshooting
- System Not Responding: Check the remote control battery level and recharge if necessary. Ensure the vehicle's battery is not depleted.
- Alarm Triggers Unexpectedly: Verify the shock sensor sensitivity settings. It may be set too high for your vehicle or environment. Adjust the sensitivity as needed.
- Remote Range is Reduced: Ensure the antenna module is properly installed and not obstructed. Avoid operating in areas with high electromagnetic interference.
- Remote Display Issues: If the LCD pager display is blank or malfunctioning, try recharging the remote. If the issue persists, contact technical support.
- For Complex Issues: If you encounter problems that cannot be resolved with these basic steps, it is recommended to consult a qualified car alarm installer.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | EC208 |
| Item Weight | 2.65 pounds |
| Product Dimensions | 9.45 x 7.09 x 3.94 inches |
| Power Supply | DC12V |
| Wireless Remote | Yes (FSK 2-Way) |
| Maximum Range | 600 Meters (in open space) |
| UPC | 716172486305 |
8. Warranty and Support
The EASYGUARD EC208 FSK 2 Way Car Alarm System is covered by a 1-year warranty from the date of purchase.
For technical assistance, product inquiries, or warranty claims, please contact EASYGUARD technical support:
- Email: sales@ieasyguard.com
- Website: www.ieasyguard.com
9. Important Safety Information
- Installation of this car alarm system should only be performed by qualified and experienced professionals to ensure proper functionality and vehicle safety.
- Always disconnect the vehicle's battery before beginning any wiring work.
- Ensure all electrical connections are secure, properly insulated, and routed away from moving parts or heat sources.
- Do not attempt to modify or alter any components of the alarm system, as this may lead to malfunction, damage, or void the warranty.
- Keep the main control unit and other electronic components away from moisture and extreme temperatures.