LEKATO MS-20
Contents
LEKATO Wireless In-Ear Monitor System MS-20 Instruction Manual
Model: MS-20 | Brand: LEKATO
Introduction
This manual provides detailed instructions for the LEKATO MS-20 Wireless In-Ear Monitor System. This system is designed to provide stable, interference-free audio transmission for clear monitoring in various applications such as live performances, studio recording, and band rehearsals. Please read this manual thoroughly before using the product to ensure proper operation and longevity.
What's in the Box
The LEKATO MS-20 system includes the following components:
- 1 x Wireless Transmitter
- 2 x Wireless Receivers
- 1 x Storage Case (also functions as a charging case)
- 1 x OTG Cable
- 1 x Data Cable (length 30cm/11.81in)
- 1 x User Manual
- 1 x Type-C Charging Cable (length 50cm/19.69in)
- 1 x 3.5mm TRS Audio Cable
- 1 x 3.5mm to 6.35mm Adapter

Product Overview
The LEKATO MS-20 system consists of a transmitter and two receivers, housed in a portable charging case. Each unit features intuitive controls and indicators.
Transmitter (TX)
- Power Button: Long press for 3 seconds to power on/off. Short press to switch between Mono/Stereo modes.
- Pairing Indicator: Shows pairing status.
- Charging Indicator: Indicates charging status.
- Mono/Stereo Indicators: Lights to show current audio mode.
- 3.5mm Aux Cable Hole: For musical source input.
- OTG Port: Connects to mobile phones/tablets for audio input.
- Volume +/- Buttons: Adjusts volume levels.
Receiver (RX)
- Power Button: Long press for 3 seconds to power on/off. Short press to switch between Mono/Stereo modes.
- Pairing Indicator: Shows pairing status.
- Charging Indicator: Indicates charging status.
- Mono/Stereo Indicators: Lights to show current audio mode.
- 3.5mm Earphone Jack: For connecting in-ear monitors.
- Type-C Earphone/Charging Port: For connecting Type-C earphones or charging.
- Volume +/- Buttons: Adjusts volume levels.

Setup
1. Initial Charging
Before first use, fully charge the charging case and both the transmitter and receivers. The charging case provides approximately 30 hours of usage time, capable of charging the 1 Transmitter + 2 Receivers system twice. The case has a 2000mAh battery capacity.
- Connect the Type-C charging cable to the charging case and a 5V 2A charging head (not included).
- Place the transmitter and receivers into their respective slots in the charging case.
- The charging indicators on the units will light up red while charging and turn off when fully charged. The charging case display will show the battery percentage.
- Important: When charging, remove the plastic film from the bottom of the TX/RX units to ensure proper contact.

2. Pairing the Units
The MS-20 system features auto-pairing. Once paired, they will automatically connect for future use.
- Long press the power button on the transmitter for 3 seconds to turn it on. The pairing indicator will flash.
- Long press the power button on the receiver for 3 seconds to turn it on. The pairing indicator will flash.
- Press the power button of the receiver 3 times quickly to initiate pairing.
- A green light on both the transmitter and receiver indicates successful pairing. The units are now ready for use.

Note: To connect multiple receivers to one transmitter, pair the first receiver as described above. Then, repeat steps 2 and 3 for additional receivers. The system supports a single transmitter sending signals to multiple receivers simultaneously (up to 10 pairs of devices).
3. Connecting to Audio Sources and Monitors
The MS-20 offers versatile connectivity options:
- Audio Input (Transmitter):
- Use the provided 3.5mm TRS audio cable to connect the transmitter to mixers, audio interfaces, guitar amps, or other audio output devices.
- For smartphones or USB-C devices, use the OTG cable to connect directly to the transmitter for plug-and-play audio input.
- Audio Output (Receiver):
- Connect your 3.5mm in-ear monitors or headphones to the 3.5mm earphone jack on the receiver.
- If using Type-C earphones, connect them to the Type-C earphone/charging port on the receiver.


Operating Instructions
1. Power On/Off
To power on or off both the transmitter and receiver units, long press their respective power buttons for 3 seconds.
2. Mono/Stereo Switching
The MS-20 system supports both Mono and Stereo audio modes. This allows for flexible routing for instruments, mixers, and digital audio sources.
- Short press the power button on either the transmitter or receiver to switch between Mono and Stereo modes.
- The corresponding indicator light (MONO or STEREO) will illuminate to show the current mode.

3. Volume Adjustment
Use the Volume +/- buttons on the receiver to adjust the monitoring volume to your preference.
4. Transmission Range and Stability
The LEKATO MS-20 offers a stable transmission range of up to 150 feet (approximately 45 meters) in open areas. The 2.4GHz wireless technology ensures strong anti-interference capabilities for a stable signal, providing low noise and latency for real-time audio synchronization.

5. Multi-Receiver Support
The system supports one transmitter broadcasting to multiple receivers simultaneously, making it ideal for bands or groups. Up to 10 pairs of devices can work together.

Maintenance
- Keep the units and charging case clean and dry. Use a soft, dry cloth for cleaning.
- Avoid exposing the devices to extreme temperatures, humidity, or direct sunlight.
- Store the units in the charging case when not in use to protect them and keep them charged.
- Ensure charging contacts are free from dust or debris for optimal charging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent audio. | Units not paired, out of range, low battery, incorrect cable connection, incorrect Mono/Stereo mode. |
|
| Units not charging in the case. | Plastic film on contacts, dirty contacts, charging case low battery, faulty cable. |
|
| Power button not responding. | Physical damage, unit completely drained. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | MS-20 |
| Connectivity Technology | Wireless (2.4GHz) |
| Noise Control | Active Noise Cancellation |
| Headphones Jack | 3.5 mm Jack |
| Input Device Interface | USB-C |
| Battery Life | 30 Hours (with charging case) |
| Charging Case Battery Capacity | 2000mAh |
| Transmission Range | 150 feet (open area) |
| Audio Quality | 24bit/48K HD Audio |
| Frequency Range | 20-20K Hz |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Control Type | Button Control |
| Item Weight | 0.29 Kilograms (approx. 10.2 ounces) |
| Package Dimensions | 4.96 x 4.09 x 2.64 inches |
| Supports Bluetooth Technology | No |
Official Product Video
Watch this official product video for a visual overview of the LEKATO MS-20 Wireless In-Ear Monitor System, demonstrating its features and ease of use.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your LEKATO MS-20 Wireless In-Ear Monitor System, please visit the official LEKATO store or contact their customer service.
Official LEKATO Store: Visit Store
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.