1. Introduction
This manual provides essential information for the proper use and maintenance of your Redmi Note 14S 4G NFC smartphone. The Redmi Note 14S features a 6.67-inch AMOLED display, 8GB of RAM, and 256GB of internal storage. It is powered by a MediaTek Helio G99-Ultra processor and runs on Android 13 with the HyperOS interface. The device includes a 5,000 mAh battery with 67W fast charging capability, a 200 MP main camera, and NFC connectivity.
2. Package Contents
Verify that your package contains the following items:
- Redmi Note 14S 4G NFC Smartphone
- USB Type-C Cable
- Power Adapter (Standard BR or EUA, as available)
- SIM Ejector Tool
- Quick Start Guide and Safety Information
3. Device Overview
Familiarize yourself with the physical features of your Redmi Note 14S.

Figure 3.1: Front view of the Redmi Note 14S smartphone in Midnight Black. This image highlights the large AMOLED display and the discreet front camera cutout.
3.1. Physical Features
- Display: 6.67-inch AMOLED screen with a 120Hz refresh rate.
- USB-C Port: Located at the bottom for charging and data transfer.
- Headphone Jack: A physical connector for headphones is present.
- Power Button/Fingerprint Sensor: Integrated for secure unlocking and power control.
- Volume Buttons: Located on the side for adjusting audio levels.
- SIM Card Tray: Supports Dual SIM cards.
3.2. Camera System
- Rear Cameras: Triple camera setup including a 200 MP main lens, an 8 MP ultrawide lens, and a 2 MP macro lens.
- Front Camera: 16 MP for selfies and video calls.
4. Setup
4.1. Inserting SIM Cards
- Locate the SIM card tray on the side of your device.
- Insert the SIM ejector tool into the small hole next to the tray and push gently until the tray pops out.
- Place your Nano-SIM cards into the designated slots on the tray. Ensure the gold contacts are facing down.
- Carefully reinsert the tray into the phone.
4.2. Initial Charging and Power On
- Connect the USB Type-C cable to the phone's charging port and the power adapter. Plug the adapter into a power outlet.
- Allow the phone to charge for at least 15 minutes before initial use.
- Press and hold the Power button until the Redmi logo appears to turn on the device.
- Follow the on-screen instructions to complete the initial setup, including language selection, Wi-Fi connection, and Google account setup.
5. Operating Instructions
5.1. Basic Navigation
The Redmi Note 14S uses a touch-sensitive display and the HyperOS interface. Swipe, tap, and pinch gestures are used for navigation and interaction.
- Home Screen: Swipe left or right to access different home screen panels.
- App Drawer: Swipe up from the bottom of the screen to access all installed applications.
- Notifications/Quick Settings: Swipe down from the top of the screen to view notifications and quick settings toggles.
5.2. Making Calls
- Tap the Phone icon on the home screen.
- Enter the phone number using the dial pad or select a contact from your address book.
- Tap the Call button to initiate the call.
5.3. Using the Camera
- Open the Camera application.
- Select your desired mode (Photo, Video, Portrait, Pro, etc.).
- Tap the shutter button to capture a photo or start/stop video recording.
- Switch between front and rear cameras using the camera toggle icon.
5.4. Connectivity
- Wi-Fi: Go to Settings > Wi-Fi to connect to available wireless networks.
- Bluetooth: Go to Settings > Bluetooth to pair with Bluetooth devices like headphones or speakers.
- NFC: Enable NFC in Settings > Connection & sharing > NFC for contactless payments and data transfer.
- Mobile Data (4G): Ensure your SIM card is active and mobile data is enabled in Settings > SIM cards & mobile networks.
5.5. Audio Features
The Redmi Note 14S supports stereo sound with Dolby Atmos for an enhanced audio experience. You can connect wired headphones via the physical headphone jack or wireless headphones via Bluetooth.
6. Maintenance
6.1. Battery Care
- Avoid exposing the device to extreme temperatures.
- Use only the original or certified charger and cable for optimal charging performance and safety.
- For long-term storage, charge the battery to approximately 50% and power off the device.
6.2. Cleaning the Device
- Use a soft, lint-free cloth to clean the screen and body of the phone.
- Avoid using harsh chemicals, abrasive cleaners, or aerosol sprays.
- Do not expose the device to water or excessive moisture, as it is not water-resistant.
6.3. Software Updates
Regularly check for and install software updates to ensure your device has the latest features, security patches, and performance improvements. Go to Settings > About phone > MIUI version to check for updates.
7. Troubleshooting
If you encounter issues with your device, try the following common solutions:
- Device not turning on: Ensure the battery is charged. Connect the charger and wait a few minutes before attempting to power on again.
- Apps crashing or freezing: Close the problematic app and reopen it. If the issue persists, restart the phone.
- Poor network signal: Check your SIM card insertion. Move to an area with better network coverage.
- Battery draining quickly: Reduce screen brightness, close unused apps, disable unnecessary connectivity features (Wi-Fi, Bluetooth, GPS) when not in use.
- Fingerprint sensor not working: Ensure your finger is clean and dry. Re-register your fingerprints in Settings > Password & security > Fingerprint unlock.
For more complex issues, refer to the official Redmi support website or contact customer service.
8. Specifications
| Feature | Specification |
|---|---|
| Model | Redmi Note 14S (2502FRA65G) |
| Display | 6.67-inch AMOLED, 1080 x 2400 resolution, 120 Hz refresh rate |
| Processor | MediaTek Helio G99-Ultra |
| RAM | 8 GB |
| Internal Storage | 256 GB |
| Rear Camera | 200 MP (main), 8 MP (ultrawide), 2 MP (macro) |
| Front Camera | 16 MP |
| Battery | 5000 mAh, 67W fast charging |
| Operating System | Android 13 with HyperOS |
| Connectivity | 4G, NFC, Wi-Fi, Bluetooth 5.2, USB Type-C |
| SIM Card | Dual SIM |
| Biometric Security | Fingerprint recognition |
| Water Resistance | Not water resistant |
| Audio | Stereo sound with Dolby Atmos, 3.5mm headphone jack |
| Manufacturer | Xiaomi |
9. Warranty and Support
9.1. Warranty Information
This Redmi Note 14S device comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
9.2. Regulatory Information
For product homologation details, please visit the official ANATEL website: sistemas.anatel.gov.br/sch. The ANATEL certification number for this model is 012002509185.
9.3. Customer Support
For further assistance, technical support, or service inquiries, please visit the official Redmi or Xiaomi support website, or contact your local authorized service center.