maXpeedingrods 2.5" Lift Kit for Can-Am Commander Series

1. Introduction

This manual provides essential information regarding the maXpeedingrods 2.5" Lift Kit designed for Can-Am Commander 800/1000 and Max models. This kit is engineered to increase ground clearance, allowing for larger tires and improved off-road capability. Please read all instructions and safety warnings carefully before installation and use.

2. Product Compatibility

This 2.5" lift kit is specifically designed for the following Can-Am Commander models:

• Can-Am Commander 800/1000: 2011-2020
• Can-Am Commander Max 800/1000: 2012-2020
• Note: This kit is compatible with X Models equipped with Fox Shocks. It is not compatible with factory air shocks models.

Image 2.1: Visual representation of the lift kit compatibility table, detailing applicable Can-Am Commander models and years.

For detailed compatibility, refer to the table below:

Note: 'Present' refers to models up to 2020 as per product specifications.

3. Product Components

The maXpeedingrods 2.5" Lift Kit includes the following components:

• Front Lift Brackets (2 pieces)
• Rear Lift Brackets (2 pieces)
• Mounting Hardware (bolts, nuts, washers)

Image 3.1: A complete view of the UTV lift kit components, showcasing the front and rear lift brackets along with the necessary mounting hardware.

Image 3.2: Another perspective of the lift kit components, including various bolts and nuts, alongside an illustrative yellow UTV.

The lift brackets are constructed from high-strength steel, precisely machined for a direct fit and powder-coated for rust resistance and durability.

Image 3.3: Illustration of the CNC machining process, highlighting the precision manufacturing of the lift kit components.

4. Setup and Installation

Important: While this suspension lift kit is designed for bolt-on installation, detailed step-by-step instructions are not included in the package. Installation requires mechanical knowledge and specialized tools. If you are not confident in your ability to perform this installation safely and correctly, it is highly recommended to seek professional assistance from a qualified mechanic or off-road vehicle specialist.

4.1. General Installation Guidance

1. Safety First: Always ensure the vehicle is securely supported on a level surface using jack stands before beginning any work. Disconnect the battery.
2. Prepare the Vehicle: Remove wheels and tires. Access the suspension components that will be modified.
3. Remove OEM Components: Carefully remove the original suspension mounting hardware as needed to install the lift brackets.
4. Install Lift Brackets: Position the maXpeedingrods lift brackets according to the vehicle's suspension design. Secure them using the provided high-strength hardware. Ensure all bolts are torqued to the manufacturer's specifications for your vehicle's suspension components.
5. Reassemble: Reinstall any removed suspension components, wheels, and tires.
6. Final Checks: After installation, perform a thorough inspection to ensure all components are properly secured and there is no interference with other vehicle parts. It is advisable to have a professional alignment performed after installing any lift kit.

Image 4.1: A visual comparison illustrating the 2.5-inch front and rear lift achieved on a UTV after installing the kit.

Image 4.2: A Can-Am Commander UTV shown with the lift kit components in the foreground, set against a desert landscape.

5. Operating Considerations

Installing a lift kit changes the vehicle's center of gravity and suspension geometry. Be aware of the following:

• Handling: The vehicle's handling characteristics may change. Drive cautiously until you are accustomed to the new feel.
• Off-Road Performance: The increased ground clearance significantly improves off-roading capabilities, allowing the vehicle to navigate rougher terrains and obstacles more effectively.
• Tire Clearance: The lift provides space for larger all-terrain tires and wheels, which can further enhance performance.

Image 5.1: A UTV demonstrating its enhanced off-road capability by driving through dusty terrain, suitable for lifted vehicles.

6. Maintenance

Regular inspection and maintenance are crucial for the longevity and safe operation of your lifted vehicle:

• Periodic Checks: Regularly inspect all lift kit components and mounting hardware for tightness, wear, or damage.
• Corrosion: Clean and inspect the powder-coated brackets for any signs of rust or damage, especially after exposure to harsh conditions.
• Alignment: Monitor tire wear and have the vehicle's alignment checked periodically, as lifted suspensions can be more sensitive to alignment changes.

7. Troubleshooting

If you encounter issues after installing the lift kit, consider the following:

• Unusual Noises: Check all bolts and nuts for proper torque. Ensure no components are rubbing against each other.
• Uneven Ride Height: Verify that all brackets are installed correctly and on the appropriate side (front/rear, left/right). Ensure suspension components are seated properly.
• Poor Handling: Re-check alignment. Ensure tire pressures are correct.

For persistent issues, consult a professional mechanic.

8. Specifications

9. Warranty and Support

maXpeedingrods offers comprehensive customer support for this product:

• Warranty: A 1-year limited warranty is provided for quality-related issues, effective from the date of purchase.
• Technical Support: Lifetime technical support is available.
• Contact: For any questions or support needs, please contact maXpeedingrods customer service.