1. Introduction
This manual provides essential information for the safe and effective use of your Jaspertronics YODN 280W 10R Moving Head Light Discharge Lamp. This lamp is specifically designed for the Varytec Trident R10 Movinghead Fixture. Please read these instructions thoroughly before installation and operation to ensure optimal performance and longevity of the product.
2. Product Overview
The Jaspertronics YODN 280W 10R discharge lamp is engineered for high-intensity light output and reliable performance in professional lighting applications. Key features include:
- High Intensity: Delivers powerful illumination suitable for moving head fixtures.
- Extended Lifetime: Average lamp lifetime of up to 1,500 hours.
- Optimal Optical System: Designed for maximum light output and efficiency.
- Compact Design: Perfectly suited for small and lightweight moving heads.
- YODN Brilliant Technology: Incorporates advanced YODN technology for superior performance.
- Elliptical Reflector Lamp: Features an elliptical reflector for focused light.
- Precise Arc Gap: Equipped with a 1.2 mm arc gap for consistent light quality.
- High Correlated Color Temperature: Ensures vibrant and accurate color reproduction.
Figure 2.1: Front view of the Jaspertronics YODN 280W 10R Discharge Lamp.
Figure 2.2: Cross-reference table showing equivalent lamp models, including HRI 280W and MSD Platinum 14R.
3. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2 x 2 x 2.4 inches |
| Item Weight | 3.2 ounces |
| Model Number | Varytec Trident R10 Movinghead-LAMP |
| Manufacturer | Jaspertronics |
| Average Lamp Lifetime | Up to 1,500 Hours |
| Arc Gap | 1.2 mm |
| Power | 280W |
4. Setup and Installation
Important Safety Information: Always disconnect the fixture from the main power supply before attempting any installation or maintenance. Allow the lamp and fixture to cool completely before handling. Wear protective gloves to avoid touching the lamp glass directly, as oils from skin can reduce lamp life.
- Power Disconnection: Ensure the Varytec Trident R10 Movinghead Fixture is turned off and unplugged from the power source.
- Cool Down: Allow the fixture to cool down for at least 30 minutes if it has been in operation.
- Access Lamp Compartment: Locate and open the lamp access cover on your Varytec Trident R10 fixture. Refer to your fixture's specific manual for exact instructions on accessing the lamp.
- Remove Old Lamp: Carefully unfasten any retaining clips or screws holding the old lamp in place. Gently pull the old lamp straight out from its socket. Dispose of the old lamp according to local regulations.
- Install New Lamp: Holding the new Jaspertronics YODN 280W 10R lamp by its base (avoid touching the glass bulb), align the pins with the socket in the fixture. Gently push the lamp into place until it is fully seated.
- Secure Lamp: Re-fasten any retaining clips or screws to secure the new lamp.
- Close Compartment: Close and secure the lamp access cover.
- Power On: Reconnect the fixture to the power supply and turn it on.
Figure 4.1: Illustration of a lamp being installed into a fixture. Always handle the lamp by its base.
5. Operating Instructions
Once the lamp is correctly installed, operate your Varytec Trident R10 Movinghead Fixture according to its manufacturer's instructions. The Jaspertronics YODN 280W 10R lamp is designed to integrate seamlessly with compatible fixtures.
- Warm-up Period: Discharge lamps require a short warm-up period to reach full brightness and stable color temperature.
- Cool-down Period: Avoid immediately restarting the lamp after turning it off. Allow a brief cool-down period (typically 5-10 minutes) before re-igniting to prolong lamp life.
- Environmental Conditions: Operate the fixture within the recommended temperature and humidity ranges specified by the fixture manufacturer.
6. Maintenance
Proper maintenance ensures the longevity and performance of your discharge lamp.
- Regular Cleaning: Periodically clean the exterior of the fixture and any accessible optical components (lenses, reflectors) with a soft, lint-free cloth. Ensure the fixture is unplugged and cool before cleaning.
- Lamp Handling: When replacing the lamp, always handle it by its ceramic base. Avoid touching the glass envelope with bare hands. If the glass is accidentally touched, clean it with an alcohol wipe before installation.
- Ventilation: Ensure the fixture's ventilation openings are clear and unobstructed to prevent overheating, which can shorten lamp life.
- Inspection: Regularly inspect the lamp and its connections for any signs of wear or damage. Replace the lamp if it shows signs of flickering, dimming, or discoloration.
7. Troubleshooting
This section addresses common issues you might encounter with your discharge lamp.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not ignite |
|
|
| Lamp flickers or dims |
|
|
| Reduced brightness |
|
|
8. Warranty and Support
Jaspertronics stands behind the quality of its products. For specific warranty information regarding your YODN 280W 10R lamp, please refer to the documentation provided at the time of purchase or visit the official Jaspertronics website. For technical support or inquiries, please contact Jaspertronics customer service.
Contact Information:
- Brand: Jaspertronics
- Website: Jaspertronics Store on Amazon (for general information)
- Manufacturer: Jaspertronics, LLC