1. Introduction
Thank you for choosing the Keazile 62-inch Walnut Wood Floor Lamp. This manual provides essential information for safe assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new floor lamp. Its stylish design, solid wood construction, and soft diffused lighting make it a perfect addition to any living room, bedroom, or office.
Video 1.1: Overview of the Keazile Solid Wood Floor Lamp, showcasing its design and features in various settings.
2. Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure the lamp is unplugged before assembly, changing bulbs, or cleaning.
- Use only E26 base bulbs. Do not exceed the maximum wattage: 60W for incandescent or 13W for LED.
- The lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Place the lamp on a stable, level surface to prevent tipping. The weighted base enhances stability.
- Keep the power cord away from heat sources, sharp edges, and heavy traffic areas.
- Do not attempt to modify or repair the lamp. Contact customer support for assistance.
- This product is UL-certified, ensuring compliance with safety standards.
3. Package Contents
Verify all components are present before beginning assembly.
- Lamp Base (Walnut Wood)
- Lamp Pole (Walnut Wood, multiple sections)
- Lampshade (White Linen, rolled)
- Lampshade Metal Rings (2 pieces, one with 3 arms for bulb socket)
- Bulb Socket Ring
- Power Cord with Foot Switch
- Instruction Manual
Figure 3.1: Key components including the foot switch, E26 bulb base, and solid wood base.
4. Setup and Assembly
Follow these steps to assemble your Keazile Floor Lamp.
4.1 Lampshade Assembly
- Unfold the rolled linen lampshade and fasten the ends together using the integrated Velcro strips to form a cylinder.
- Take one of the metal rings (the one with the 3 arms) and face the raised side inward. Snap this ring into the clips on the top edge of the lampshade.
- Turn the lampshade over and snap the other metal ring into the clips on the bottom edge of the lampshade.
- Adjust the Velcro for an even, snug lampshade.
Figure 4.1: Lampshade assembly steps.
Video 4.1: Official Keazile Floor Lampshade Installation Guide. This video demonstrates the step-by-step process of assembling the lampshade, including unfolding, attaching the metal rings, and securing the Velcro.
4.2 Lamp Body Assembly
- Carefully unpackage the wooden lamp pole sections and the base.
- Screw the lamp pole sections together clockwise until secure. Ensure the power cord passes through each section.
- Attach the assembled lamp pole to the wooden base by screwing it clockwise until firmly connected.
- Unscrew the socket ring from the bulb holder at the top of the lamp pole.
- Place the assembled lampshade onto the bulb holder, ensuring the metal ring rests securely.
- Screw the socket ring back onto the bulb holder to secure the lampshade in place.
- Insert an E26 base bulb (not included) into the socket. Do not exceed 60W incandescent or 13W LED.
Figure 4.2: Lamp body and bulb installation steps.
5. Operation
Operating your Keazile Floor Lamp is simple and convenient.
- Plug the power cord into a standard 120V AC electrical outlet.
- Locate the foot switch on the power cord.
- To turn the lamp ON, gently press the foot switch.
- To turn the lamp OFF, press the foot switch again.
Figure 5.1: Lamp in OFF and ON states.
Figure 5.2: Detail of the foot switch for easy operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the power before cleaning. Wipe the wooden base and pole with a soft, dry cloth. For the linen shade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners or abrasive materials.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely. Unscrew the socket ring, remove the old bulb, and screw in a new E26 bulb (max 60W incandescent / 13W LED). Reattach the socket ring and lampshade.
- Cord Care: Periodically inspect the power cord for any damage. If the cord is damaged, discontinue use and contact customer support.
7. Troubleshooting
If you encounter any issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lampshade is wobbly or uneven. |
|
|
| Lamp flickers. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | KZ-FL-004-WH |
| Product Dimensions | 15.7"D x 19.7"W x 61.4"H |
| Item Weight | 10.7 Pounds |
| Base Material | Walnut Wood |
| Shade Material | Linen |
| Shade Color | White |
| Bulb Base | E26 |
| Max Wattage (Incandescent) | 60W |
| Max Wattage (LED) | 13W |
| Voltage | 120 Volts |
| Switch Type | Foot Switch |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Certifications | UL Listed |
Figure 8.1: Product dimensions and key specifications.
9. Warranty and Support
9.1 Warranty Information
The Keazile Floor Lamp (Model KZ-FL-004-WH) is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For any questions, concerns, or technical assistance, please contact Keazile Customer Service:
- Online Service: Available 24/7 for inquiries.
- Email Support: Expect a response within 24 hours.
- Replacements: Free replacements are offered for eligible issues.
Visit the official Keazile store for more information: Keazile Store
Figure 9.1: Keazile Brand Logo.
