KEMEI Professional Hair Clipper and Trimmers Set User Manual

1. Introduction

This manual provides instructions for the KEMEI Professional Hair Clipper and Trimmers Set, which includes the KEMEI KM-2296 Cordless Hair Clipper, KEMEI KM-2299 Hair/Beard Trimmer, and KEMEI KM-1102 Electric Foil Shaver. Please read these instructions carefully before using the devices to ensure proper operation and maintenance.

2. Safety Information

• Avoid use on infants.
• Keep the trimmer away from water sources.
• Follow recommended cleaning and maintenance procedures.
• Always unplug the trimmer when not in use.
• Keep blades away from eyes and face.
• Do not use while sleeping or unconscious.

3. Package Contents

The KEMEI Professional Hair Clipper and Trimmers Set includes the following items:

• 1 x KEMEI KM-2296 Cordless Hair Clipper
• 1 x KEMEI KM-2299 Hair/Beard Trimmer
• 1 x KEMEI KM-1102 Electric Foil Shaver
• 8 x Hair Trimmer Guide Combs (3/6/10/13/16/19/22/25 mm)
• 3 x Detail Trimmer Guide Combs (1/2/3 mm)
• 3 x USB Charging Cables
• 1 x Travel Bag
• 1 x Cleaning Brush
• 1 x Lubricating Oil
• 1 x Hair Comb
• 1 x Barber Cape
• 1 x Charging Dock (for KM-2296)

4. Product Overview

4.1 KEMEI KM-2296 Cordless Hair Clipper

The KM-2296 is designed for general hair cutting. It features sharp stainless steel blades and a powerful motor for efficient performance. The adjustable lever allows for precise cutting lengths without guide combs.

4.2 KEMEI KM-2299 Hair/Beard Trimmer

The KM-2299 is a detail trimmer suitable for hair and beard styling, edging, and trimming around the face and sideburns. It features a zero-gapped blade for close cuts and a high-performance motor.

4.3 KEMEI KM-1102 Electric Foil Shaver

The KM-1102 is an electric foil shaver equipped with intelligent dual floating shaving heads. Its slim foil blade mesh conforms to facial contours, effectively capturing short, thick whiskers for a smooth shave on the face, neck, and jawline. It includes a reverse sideburns blade for additional precision.

5. Setup and Charging

5.1 Initial Charge

Before first use, fully charge each device. Use the provided USB cables and a compatible USB power source (PC, power bank, or USB charger).

• KM-2296 Cordless Hair Clipper: Charge for approximately 3.5 hours for up to 350 minutes of operating time. Use the charging dock for convenience.
• KM-2299 Hair/Beard Trimmer: Charge for approximately 3 hours for up to 180 minutes of operating time.
• KM-1102 Electric Foil Shaver: Charge for approximately 1.5 hours for up to 60 minutes of operating time.

A charging indicator light will typically show charging status and turn off or change color when fully charged.

6. Operating Instructions

6.1 Using the KM-2296 Hair Clipper

1. Select the desired guide comb (3mm to 25mm) and attach it securely to the clipper blade.
2. Turn on the clipper using the power switch.
3. Begin cutting hair against the direction of hair growth, using smooth, even strokes.
4. Adjust the taper lever for finer blending and shorter cuts without changing combs.

6.2 Using the KM-2299 Hair/Beard Trimmer

1. For precise lines and zero-gapped cuts, use the trimmer without a guide comb.
2. For beard trimming or specific hair lengths, attach one of the detail trimmer guide combs (1mm, 2mm, or 3mm).
3. Turn on the trimmer and carefully outline hairlines, trim beards, or create designs.

6.3 Using the KM-1102 Electric Foil Shaver

1. Ensure your skin is clean and dry for best results.
2. Turn on the shaver using the push-up switch.
3. Gently press the shaver against your skin and move it in short, circular motions or straight lines against the direction of hair growth.
4. For sideburns or precise edges, use the reverse sideburns blade by sliding the switch to engage it.

7. Maintenance

7.1 Cleaning the Blades

1. Turn off and unplug the device before cleaning.
2. Use the provided cleaning brush to remove loose hairs from the blades and cutting heads.
3. For the foil shaver, the head can often be detached for thorough cleaning. Refer to the specific device instructions for removal.
4. Do not rinse the main body of the devices under water unless explicitly stated as waterproof.

7.2 Lubrication

Regularly apply a small drop of the provided lubricating oil to the blades of the clipper and trimmer after cleaning. This helps maintain blade sharpness and smooth operation.

7.3 Storage

Store the devices and accessories in the travel bag in a cool, dry place when not in use.

8. Troubleshooting

8.1 Device Not Turning On

• Ensure the device is fully charged.
• Check that the power switch is in the 'ON' position.

8.2 Poor Cutting Performance

• Clean the blades and cutting heads thoroughly to remove any trapped hair or debris.
• Apply lubricating oil to the blades.
• Ensure guide combs are correctly attached.
• If blades are dull, consider replacement if available for your model.

8.3 Excessive Noise or Vibration

• Clean and lubricate the blades.
• Ensure all parts are securely attached.

9. Specifications

10. Warranty and Support

KEMEI products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer. Keep your proof of purchase for any warranty claims.