TechniSat DIGITRADIO CD 2GO BT Portable CD Player User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation of your TechniSat DIGITRADIO CD 2GO BT portable CD player. Please read this manual thoroughly before using the device and retain it for future reference. This device combines a portable CD player with DAB+ and FM radio reception, Bluetooth streaming, and an MP3 resume function.

Package Contents

Verify that all items listed below are included in your package:

• TechniSat DIGITRADIO CD 2GO BT Portable CD Player
• Headphones (with integrated DAB/FM antenna)
• 2 x BL5C Rechargeable Batteries
• External Power Cable (Charging Cable)
• User Manual

Product Overview

Familiarize yourself with the components and controls of your DIGITRADIO CD 2GO BT.

Figure 1: Top view of the TechniSat DIGITRADIO CD 2GO BT portable CD player. The device features a circular, silver brushed metal design with a central display and various control buttons.

Control Buttons and Display

• Display: Shows current mode (DAB+, FM, CD, Bluetooth), time, station information, track details, battery status, and signal strength.
• SKIP UP (>>|): Skips to the next track on CD, next station on radio, or navigates menu options.
• ON/OFF OK (Play/Pause): Powers the device on/off (long press), plays/pauses CD playback, confirms selections in menus.
• STOP SEARCH (Square icon): Stops CD playback, initiates station search in radio mode.
• DOWN SKIP (|<<): Skips to the previous track on CD, previous station on radio, or navigates menu options.
• MENU: Accesses the main menu for settings and options.
• EQ/BT: Toggles equalizer presets or activates Bluetooth pairing mode.
• MODE: Switches between different operating modes (CD, DAB+, FM, Bluetooth).

Setup

1. Charging the Batteries

1. Insert the two BL5C rechargeable batteries into the battery compartment located on the underside of the device. Ensure correct polarity.
2. Connect the external power cable to the device's charging port and to a suitable USB power adapter (not included) or a powered USB port.
3. The battery indicator on the display will show charging status. Allow sufficient time for a full charge before first use.

2. Connecting Headphones

The included headphones also function as the antenna for DAB+ and FM radio reception. It is essential to connect them for optimal radio performance.

• Plug the 3.5mm jack of the headphones into the headphone port on the device.

Operating Instructions

Power On/Off

• To power on, press and hold the ON/OFF OK button until the display illuminates.
• To power off, press and hold the ON/OFF OK button until the display turns off.

CD Playback

1. Open the CD compartment cover.
2. Insert a CD with the label side facing up. Close the cover securely.
3. Press the MODE button to select CD mode.
4. Press the ON/OFF OK button to start playback.
5. Use SKIP UP (>>|) and DOWN SKIP (|<<) to navigate between tracks.
6. Press the ON/OFF OK button to pause playback, press again to resume.
7. Press the STOP SEARCH button to stop playback.

MP3 Resume Function: The device will automatically resume playback from the last listened position after being powered off and on again. This is particularly useful for audiobooks.

DAB+ Radio Operation

1. Ensure headphones are connected to act as the antenna.
2. Press the MODE button to select DAB+ mode.
3. The device will automatically perform a scan for available DAB+ stations upon first use or if no stations are found. To manually initiate a scan, press the MENU button, navigate to 'Scan', and confirm with ON/OFF OK.
4. Use SKIP UP (>>|) and DOWN SKIP (|<<) to browse through available stations.
5. To save a favorite station, tune to the desired station, then press and hold the MENU button. Select a preset number (1-10) and confirm.
6. To recall a favorite station, briefly press the MENU button, navigate to 'Presets', and select your desired station.

FM Radio Operation

1. Ensure headphones are connected to act as the antenna.
2. Press the MODE button to select FM mode.
3. To automatically search for stations, press the STOP SEARCH button. The device will scan and stop at the next strong signal.
4. Use SKIP UP (>>|) and DOWN SKIP (|<<) for fine-tuning or to jump between saved stations.
5. To save a favorite station, tune to the desired station, then press and hold the MENU button. Select a preset number (1-10) and confirm.
6. To recall a favorite station, briefly press the MENU button, navigate to 'Presets', and select your desired station.

Bluetooth Pairing

1. Press the MODE button to select Bluetooth mode. The display will indicate "Pairing" or similar.
2. Alternatively, press and hold the EQ/BT button to enter Bluetooth pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone, speaker), search for available Bluetooth devices.
4. Select "DIGITRADIO CD 2GO BT" from the list of found devices to pair.
5. Once paired, you can stream audio from your connected device to the DIGITRADIO CD 2GO BT.

Equalizer Settings

• Press the EQ/BT button repeatedly to cycle through available equalizer presets (e.g., Normal, Pop, Rock, Jazz, Classic).
• Select the preset that best suits your audio preference.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents.
• CD Care: Handle CDs by their edges. Keep them free from dust, fingerprints, and scratches. Use a soft, lint-free cloth to clean CDs, wiping from the center outwards.
• Battery Care: If the device will not be used for an extended period, remove the batteries to prevent leakage.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official TechniSat website. Specific details regarding spare parts availability and software updates are not provided in this manual.