Introduction
The Jadfezy Action Camera FHD 1080P is designed to capture high-quality video and photos in various environments, including underwater. It features a 1080P/30FPS video resolution, 12MP photo quality, a 2-inch LCD screen for real-time viewing, and comes with a waterproof case allowing dives up to 30 meters (98 feet). This manual provides essential information for setting up, operating, and maintaining your camera.
What's in the Box
Upon opening your Jadfezy Action Camera package, you should find the following items:
- 1 * Jadfezy action camera
- 1 * 32GB Card (pre-installed in the camera)
- 2 * Rechargeable batteries (one is installed in the camera)
- 1 * Waterproof case，
- 1 * USB cable，
- 1 * User Manual (Multilingual language)，
- and a variety of installation accessories to adapt to various sports equipment such as bicycle, helmet,self stick etc.
Figure 1: Jadfezy Action Camera and its comprehensive accessory kit.
Video 1: An overview of the Jadfezy Action Camera and its included accessories, demonstrating the unboxing experience and showcasing each component.
Key Features
- FHD 1080P/30FPS Action Camera: Captures high-definition video at 30 frames per second and 12MP photo quality.
- 2 Batteries Action Cam: Equipped with two rechargeable 900mAh batteries for extended use.
- 2 inches LCD screen: Provides a real-time display for easy framing and playback.
- 30M/98FT waterproof case: Allows the camera to be used underwater up to 30 meters (98 feet).
- 32GB Memory Card & Tons of Free Accessories: Includes a 32GB memory card and various mounts for bicycles, helmets, skateboards, and self-sticks.
Figure 2: The Jadfezy Action Camera, showcasing its compact design and integrated screen.
Figure 3: The camera enclosed in its waterproof case, suitable for underwater activities.
Setup
1. Charging the Batteries
Before first use, fully charge both included batteries. Insert a battery into the camera and connect the camera to a USB power source using the provided USB cable. The charging indicator light will show the charging status. A full charge typically takes 2-3 hours.
Figure 4: The two rechargeable 900mAh batteries provided with the camera.
2. Inserting the Memory Card
Your camera comes with a 32GB memory card pre-installed. If you need to remove or replace it:
- Open the battery compartment cover on the bottom of the camera.
- Locate the microSD card slot.
- Gently push the card until it clicks into place. To remove, push again until it springs out.
Ensure the camera is powered off before inserting or removing the memory card to prevent data corruption.
Video 2: Demonstration of opening the waterproof case, installing the battery, and inserting the 32GB memory card into the action camera.
3. Attaching Mounts and Accessories
The camera includes various mounts for different activities. Refer to the specific accessory's instructions for proper attachment. For example, the bicycle bracket attaches to handlebars, and the helmet mount uses 3M adhesives for secure placement.
Figure 5: The action camera shown with different mounting options for diverse sports and activities.
Operating the Camera
1. Power On/Off
- To power on: Press and hold the Power/Mode button on the front of the camera for 3 seconds.
- To power off: Press and hold the Power/Mode button for 3 seconds again.
2. Mode Switching
Press the Power/Mode button repeatedly to cycle through different modes: Video Recording, Photo Mode, Playback Mode, and Settings Mode.
3. Video Recording
- Switch to Video Recording Mode (indicated by a video camera icon on the screen).
- Press the OK/Shutter button on top of the camera to start recording. A red dot will flash on the screen.
- Press the OK/Shutter button again to stop recording.
4. Taking Photos
- Switch to Photo Mode (indicated by a camera icon on the screen).
- Frame your shot using the 2-inch LCD screen.
- Press the OK/Shutter button to take a photo.
5. Menu Navigation
In Settings Mode, use the Up/Down buttons (usually on the side) to navigate through options. Press the OK/Shutter button to select an option.
Maintenance
- Cleaning: Use a soft, lint-free cloth to clean the camera lens and screen. For the waterproof case, rinse with fresh water after saltwater use and ensure seals are free of debris.
- Battery Care: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. If storing for extended periods, charge them to about 50% capacity.
- Storage: When not in use, store the camera and accessories in a protective case to prevent damage from dust, moisture, and impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera won't turn on. | Low battery; battery not inserted correctly. | Charge the battery; re-insert the battery correctly. |
| Cannot record video/take photos. | Memory card full; memory card error; incorrect mode. | Delete old files or replace card; format card (backup data first); switch to correct mode. |
| Poor image/video quality. | Dirty lens; low light conditions; incorrect settings. | Clean the lens; ensure adequate lighting; adjust resolution settings. |
| Water leakage in waterproof case. | Seal not properly closed; debris on seal; damaged seal. | Ensure case is securely latched; clean seal thoroughly; inspect seal for damage and replace if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Jadfezy |
| Item Model Number | J-03series |
| Video Capture Resolution | 1080p |
| Photo Sensor Technology | CMOS |
| Screen Size | 2 Inches |
| Waterproof Depth | Up to 30M / 98FT (with waterproof case) |
| Batteries | 2 Lithium Ion batteries (900mAh each) |
| Flash Memory Type | Micro SD (32GB card included) |
| Connectivity Technology | HDMI, USB |
| Item Weight | 12.1 ounces |
| Package Dimensions | 8.35 x 4.05 x 2.6 inches |
Warranty and Support
For information regarding product warranty, technical support, or service, please refer to the official Jadfezy website or contact their customer service directly. Details are typically provided on the product packaging or the manufacturer's official online resources.