HANYCONY HN16WC2 5 Ft Black Surge Protector Power Strip Instruction Manual

Introduction

Thank you for choosing the HANYCONY HN16WC2 Surge Protector Power Strip. This device is designed to provide extensive power distribution and protection for your electronic equipment in various environments, including home offices, entertainment centers, and workshops. Please read this manual thoroughly before use to ensure safe and optimal operation.

Key Features

• 20-in-1 Functionality: Equipped with 16 AC outlets and 4 USB charging ports (2 USB-A, 2 USB-C) for versatile power needs.
• Advanced Surge Protection: 2700 Joules energy absorption capacity with a 3-level complementary circuit (TVS, MOV, GDT) to protect devices from voltage spikes and fluctuations.
• Overload Protection: Integrated circuit breaker with an on/off switch automatically cuts power to prevent overload.
• Smart USB Charging: USB ports (5V/3.1A total, 15.5W) with smart technology detect connected devices and deliver optimal charging speed. USB-A ports offer 2.4A Max output, and USB-C ports offer 3A Max.
• Space-Saving Design: Features a 5 ft heavy-duty extension cord with a 45° angled flat plug, allowing furniture to be placed closer to the wall.
• Mountable Design: Four screw-mounting holes on the back enable secure installation on walls or under desks.
• Enhanced Safety: ETL certified with UL certified major components. Constructed with environmental protection and fire-resistance PC shell (flame retardant at 1382°F).

Safety Information

To ensure safe operation and prevent damage to your devices or the surge protector, please observe the following safety guidelines:

• Do not exceed the maximum power rating of 1875W/15A.
• This device is designed for indoor use only. Avoid exposure to moisture or wet conditions.
• Do not disassemble or modify the surge protector. Refer all servicing to qualified personnel.
• Keep children away from the power strip and connected devices.
• Ensure the plug is fully inserted into the wall outlet.
• Do not use with aquariums or other water-related products.
• The 'SURGE PROTECTED' indicator light confirms active surge protection. If this light is off, the surge protection is no longer active, and the unit should be replaced.
• The 'POWER PROTECTED' indicator light confirms the unit is receiving power and providing power to connected devices.

Setup

Setting up your HANYCONY Surge Protector is straightforward. Follow these steps for proper installation:

1. Unpack the Device: Carefully remove the surge protector from its packaging.
2. Choose a Location: Select a dry, indoor location away from heat sources and moisture. Consider using the wall-mounting feature for a tidy setup.
3. Wall Mounting (Optional): The back of the surge protector features four keyhole slots. Use appropriate screws (not included) to securely mount the unit to a wall or under a desk. Ensure the mounting surface is sturdy enough to support the unit and any connected devices.
4. Connect to Power: Plug the 5 ft flat plug extension cord into a standard 3-prong grounded AC outlet. The flat plug design allows for placement behind furniture without obstruction.
5. Verify Indicators: Once plugged in, the 'POWER PROTECTED' and 'SURGE PROTECTED' indicator lights should illuminate green, confirming the unit is operational and providing protection.

Operating Instructions

Your HANYCONY Surge Protector is designed for ease of use. Here’s how to operate it:

1. Power On/Off: Use the master ON/OFF switch located on the unit to control power to all connected AC outlets and USB ports. Press the switch to the 'ON' position to supply power and 'OFF' to cut power.
2. AC Outlets: Plug your electronic devices into any of the 16 AC outlets. The wide-spaced outlets accommodate larger power adapters without blocking adjacent ports.
3. USB Charging Ports: Connect your USB-powered devices (smartphones, tablets, etc.) to the 2 USB-A or 2 USB-C ports. The iSmart technology will automatically detect your device and deliver the optimal charging current.
4. Indicator Lights:
   • Power Protected (Green LED): Indicates that the power strip is receiving power and providing power to connected devices.
   • Surge Protected (Green LED): Indicates that the surge protection feature is active and protecting your devices. If this light is off, the surge protection has been compromised, and the unit should be replaced.

Maintenance

The HANYCONY Surge Protector requires minimal maintenance. Follow these simple guidelines to ensure its longevity and continued performance:

• Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires, cracks, or loose connections. If any damage is found, discontinue use and replace the unit.
• Surge Protection Status: Regularly check the 'SURGE PROTECTED' indicator light. If it is off, the surge protection components have absorbed a significant surge and can no longer protect your devices. The unit will still function as a power strip, but it is recommended to replace it to maintain full protection.

Troubleshooting

If you encounter issues with your HANYCONY Surge Protector, refer to the following common problems and solutions:

• No Power to Devices:
  • Ensure the power strip's ON/OFF switch is in the 'ON' position.
  • Check if the power strip is securely plugged into a working wall outlet.
  • Verify that the 'POWER PROTECTED' indicator light is illuminated. If not, check the wall outlet or try a different one.
  • If the switch has tripped (popped out), it indicates an overload. Unplug some devices, then press the switch back in to reset.
• Surge Protection Light is Off:
  • This means the surge protection components have absorbed a power surge and are no longer active. While the power strip may still function, it no longer provides surge protection. It is recommended to replace the unit to ensure continued protection for your electronics.
• USB Ports Not Charging:
  • Ensure the power strip is powered on.
  • Check the USB cable for damage and ensure it is properly connected to both the device and the power strip.
  • Try a different USB port or cable to isolate the issue.

Specifications

Product Overview Video

Warranty and Support

HANYCONY products are designed for reliability and performance. For specific warranty details or technical support, please refer to the contact information provided with your product packaging or visit the official HANYCONY website.

For further assistance, you may contact HANYCONY customer service through their official channels. Please have your model number (HN16WC2) and purchase date available when contacting support.

HANYCONY Store: Visit HANYCONY Store on Amazon