1. Introduction
This manual provides essential information for the safe and effective operation of your Wiwreenm LED Moving Head Light, model ZQ02102US. Please read these instructions thoroughly before installation and use to ensure proper function and longevity of the product.
2. What's in the Box
Verify that all components are present upon unpacking:
- 1 x Moving Head Stage Light
- 1 x Power Cord
- 1 x Hook Accessory
- 1 x User Manual (this document)
Image: The contents of the product packaging, showing the moving head light, power cord, mounting hook, and user manual.
3. Setup and Installation
The Wiwreenm LED Moving Head Light is designed for versatile installation. Ensure the mounting surface or structure can safely support the weight of the fixture (approximately 16.09 pounds).
3.1 Mounting Options
- Floor Mount: Place the unit on a stable, level surface.
- Ceiling/Wall Mount: Use the provided hook accessory to securely attach the light to a truss, ceiling, or wall. Ensure all connections are tightened.
Image: The moving head light shown mounted in different orientations, demonstrating its pan (X-axis 540°) and tilt (Y-axis 220°) movement capabilities.
3.2 Power Connection
Connect the provided power cord to the 'POWER IN' port on the rear of the unit and then to a compatible power outlet (AC 110V-240V, 50-60Hz).
3.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller to the 'DMX IN' port. For multiple units, daisy-chain them using the 'DMX OUT' to the next unit's 'DMX IN'.
Video: This video showcases the various lighting effects and features of the Wiwreenm LED Moving Head Light, including color changes, movement, and different modes.
4. Operating Modes
The ZQ02102US offers multiple control options:
- DMX512 Control: Allows precise control over all light functions via a DMX controller. Supports 17 or 25 DMX channels.
- Master-Slave Mode: Link multiple units together. One unit acts as the master, controlling all other slave units.
- Auto Run Mode: Pre-programmed light shows run automatically.
- Sound Activated Mode: The light reacts to music or sound, creating dynamic effects.
Image: A detailed view of the Wiwreenm LED Moving Head Light, highlighting the main light array and the control panel at its base.
4.1 LCD Display and Navigation
The unit features an LCD display and buttons (MENU, ENTER, UP, DOWN) for mode selection and parameter adjustment. Refer to the on-screen menu for specific settings.
Video: This video illustrates how to navigate the LCD display and select different control modes and settings on the moving head light.
5. Features and Functions
The ZQ02102US is equipped with advanced lighting capabilities:
- 4-in-1 LED Beads: Features 19x10W 4-in-1 LED beads providing Beam, Wash, Strobe, and Zoom effects.
- Outer Ring Light Strip: An additional strip of 60x0.2W 5050 R/G/B LED beads creates auxiliary effects like running, jumping, gradient, and chasing.
- Electronic Zoom: Adjustable beam output angle from 10° to 60°.
- Pan and Tilt Movement: X-axis (Pan) 540°, Y-axis (Tilt) 220° for wide coverage.
- Electronic Dimming: Smooth 0-100% electronic dimming.
- Strobe Effect: Adjustable strobe speed from 0-25 times per second.
Image: Close-up of the light head, illustrating the 19 RGBW 4-in-1 LED beads and the surrounding 60 5050 RGB side light strip.
Image: A collage displaying different color combinations and effects produced by the RGBW 4-in-1 LEDs and the integrated light strip.
Image: Visual representation of the electronic zoom function, showing the beam angle adjusting from 10 degrees (zoom out) to 60 degrees (zoom in).
6. Specifications
| Specification | Detail |
|---|---|
| Model Number | ZQ02102US |
| Brand | Wiwreenm |
| Light Source Type | Light Emitting Diode (LED) |
| Number of Light Sources | 19 (main) + 60 (outer ring) |
| Wattage | 220 watts |
| Brightness | 4500 lumen |
| Voltage | AC 110V-240V |
| Frequency | 50-60Hz |
| Beam Output Angle | 10-60° |
| X-axis Movement (Pan) | 540° |
| Y-axis Movement (Tilt) | 220° |
| Material | Acrylonitrile Butadiene Styrene (ABS), Aluminum |
| Product Dimensions | 12.59"L x 8.81"W x 15.74"H |
| Item Weight | 16.09 pounds |
Image: A diagram illustrating the physical dimensions (length, width, height) and weight of the Wiwreenm LED Moving Head Light.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your LED Moving Head Light.
- Cleaning: Periodically clean the lens and exterior with a soft, dry cloth. Avoid abrasive cleaners.
- Ventilation: Ensure the cooling fan and vents are free from dust and obstructions to prevent overheating.
- Inspection: Regularly check power cables and DMX connections for any signs of wear or damage.
- Storage: When not in use, store the light in a dry, dust-free environment.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on | No power supply; faulty cable | Check power connection; test with another outlet/cable |
| No DMX control | Incorrect DMX address; faulty DMX cable; incorrect mode | Verify DMX address and channel mode; check cable connections; ensure DMX mode is selected |
| Light output is dim or inconsistent | Dust on lens; overheating; power fluctuation | Clean lens; ensure proper ventilation; check power source stability |
| Movement is erratic or unresponsive | Motor issue; DMX signal interference | Restart unit; check DMX connections; consult support if problem persists |
9. Warranty and Support
For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Wiwreenm website. Keep your purchase receipt as proof of purchase.