Acdctek 25V AC Adapter

Acdctek 25V AC Adapter User Manual

Model: 25V AC Adapter (Compatible with various Shark Vacuum Models)

Introduction

This manual provides essential information for the safe and effective use of your Acdctek 25V AC Adapter. This adapter is designed to provide reliable power to compatible Shark Rocket Pro and Stick Vac Vacuum Cleaner models. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

To ensure safe operation and prevent damage, please observe the following safety precautions:

Use the adapter only with devices specified in the compatibility list.
Do not expose the adapter to water, moisture, or extreme temperatures.
Do not disassemble, modify, or attempt to repair the adapter. Refer servicing to qualified personnel.
Ensure the power outlet voltage matches the adapter's input voltage (100-240V).
Unplug the adapter from the power outlet when not in use or during electrical storms.
Keep the adapter away from heat sources and direct sunlight.
Avoid placing heavy objects on the power cord.
This adapter features built-in safety protection mechanisms:
- OVP (Over Voltage output Protection)
- OCP (Over Current output Protection)
- SCP (Short Circuit output Protection)

Product Overview

The Acdctek 25V AC Adapter is a compact and efficient power supply designed for specific Shark vacuum models. It features a standard US plug and a round DC output connector.

Acdctek 25V AC Adapter with power cord coiled

Figure 1: Front view of the Acdctek 25V AC Adapter with its power cord coiled, showing the input specifications and certifications.

Acdctek 25V AC Adapter showing the top view of the plug and coiled cord

Figure 2: Top view of the Acdctek 25V AC Adapter, highlighting the plug prongs and the neatly coiled output cable.

Acdctek 25V AC Adapter from an angled perspective

Figure 3: Angled view of the Acdctek 25V AC Adapter, showing the compact design and the DC output connector.

Acdctek 25V AC Adapter side view with coiled cord

Figure 4: Side view of the Acdctek 25V AC Adapter, illustrating its slim profile and the connection point for the output cable.

Setup

Verify Compatibility: Before connecting, ensure your device (e.g., Shark vacuum) is listed as compatible with this 25V AC adapter. Refer to the "Compatibility" section for a detailed list.
Connect to Device: Insert the round DC output connector of the adapter firmly into the charging port of your compatible Shark vacuum cleaner.
Connect to Power Outlet: Plug the AC adapter's prongs into a standard 100-240V wall power outlet.
Charging Indication: Your device should indicate that it is charging (e.g., an LED indicator on the vacuum).

Operating

Once connected, the adapter will automatically begin supplying power or charging your compatible device. No further user interaction is required for basic operation.

Always ensure the adapter is securely plugged into both the device and the wall outlet.
Avoid bending or crimping the power cord excessively.
Do not cover the adapter during operation to allow for proper ventilation.

Maintenance

Proper maintenance ensures the longevity and safe operation of your AC adapter:

Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
Inspection: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately.

Troubleshooting

Problem	Possible Cause	Solution
Device not charging/powering on.	Adapter not fully plugged in. Power outlet is not active. Device is not compatible. Damaged adapter or cable.	Ensure both ends of the adapter are securely connected. Test the outlet with another device. Verify your device model against the compatibility list. Inspect the adapter and cable for damage. If damaged, replace the adapter.
Adapter feels hot during use.	Normal operation (slight warmth). Poor ventilation. Overload or short circuit.	A slight warmth is normal. Ensure the adapter is not covered and has adequate airflow. Disconnect immediately. Check for short circuits in the device or cable. Do not use if excessively hot.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Feature	Detail
Input Voltage	100-240V AC, 50/60Hz
Output Voltage	25V DC
Connector Type	Round DC Connector
Safety Protection	OVP, OCP, SCP Protection
Manufacturer	Acdctek
Country of Origin	China

Compatibility

This Acdctek 25V AC Adapter is compatible with a wide range of Shark vacuum cleaner models, including but not limited to:

Shark UZ155, UZ15526, UZ155V5
Shark Rocket Pro DK33-248080H-U, DK33-248080HU, DK33-248080H
Shark Pet Pro IZ162H, IZ163H, IZ362H, IZ363H, UZ365H, IZ363HT
Shark IX140, IX141, IX160 Series
Shark IZ140C, IZ141C, IZ140, IZ141, IZ142, UZ145, WZ140
Shark IZ162H 26, IZ162H26, IZ162HC
Shark XBCHGX140
Shark XSBT600, XSBT620, XFBT620 (for 21.6V 1900mAh 41Wh Battery Charger)
Shark Model DK33-248080H-B, DK33-248080HB

Note: This adapter is specifically designed for 25V DC input devices. Please check your device's power requirements before use.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Acdctek customer service through your point of purchase. Keep your purchase receipt as proof of purchase.

Customer Service: Please visit the Acdctek official website or contact the seller directly for assistance.